Product Overview
The Bently Nevada 330104-00-20-05-02-00 3300 XL 8 mm Proximity Probe is a high-performance sensor designed for non-contact vibration and position measurement in rotating machinery. As part sur the globally trusted 3300 XL series, this proximity probe operates using eddy current technology to deliver precise, real-time monitoring sur shaft position and dynamic behavior.
Matched with a compatible extension cable and Proximitor sensor, this probe provides an accurate linear output corresponding to shaft-to-probe distance, enabling machine protection systems to detect mechanical degradation — before it results in costly unplanned downtime.
Built to operate in demanding industrial environments, this particular model — with a 0.5 meter total length, armor cable, and standard 8 mm tip — is ideal for critical machinery in power generation, oil & gas, refining, chemical processing, and other industries where robust, reliable measurements are essential for equipment health monitoring and protection.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Modèle | 330104-00-20-05-02-00 |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Sensing Technology | Eddy current, non-contact |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Thread Size | 3/8-24 UNF |
| Total Length | 0.5 meter |
| Cable Armor | Armored |
| Connector Type | Miniature coaxial connector |
| Target Material | 4140 steel (calibrated) |
| Measurement Range | 2 mm (80 mils), linear range |
| Scale Factor | 200 mV/mil (7.87 mV/μm) nominal |
| System Linear Range | 80 mils (2.0 mm) |
| Non-Linearity | ≤ ±0.75% sur full scale (typical) |
| Frequency Response | 0 Hz to 10 kHz (±3 dB) |
| Operating Temperature (Probe) | -51 °C to +177 °C |
| Operating Temperature (System) | -35 °C to +120 °C |
| Humidity | 100% condensing, sealed |
| Shock / Vibration Tolerance | 10 g @ 10-2,000 Hz |
| Pressure Rating | 5 bar (sealed probe tip) |
| Certifications | CE, ATEX Zone 2, CSA, IECEx |
| Poids | 0.161 kg |
Applications
The 330104-00-20-05-02-00 3300 XL 8 mm Proximity Probe is widely used across many industries for condition monitoring and protection sur critical rotating machinery:
-
Gas & Steam Turbines
Monitoring shaft vibration and axial position for predictive maintenance and protection. -
Compressors
Detecting excessive vibration and shaft displacement in centrifugal and reciprocating compressors. -
Electric Motors
Providing early warnings sur imbalance, misalignment, and bearing wear. -
Pumps
Safeguarding pump shafts in chemical, refining, and water/wastewater industries. -
Gearboxes
Monitoring rotational dynamics and gear mesh conditions. -
Paper Machines, Blowers, and Fans
Protecting against excessive mechanical wear and operational inefficiencies. -
Power Generation
Ensuring turbine generator health in fossil, nuclear, and renewable plants.
Product Advantages
-
Trusted Global Standard
The 3300 XL 8 mm system is the world’s most widely used proximity transducer system. -
Wide Temperature Capability
Rated up to 177 °C for probe tip operation — suited to hot machinery environments. -
Robust Armor Cable
Provides mechanical protection for long cable runs in harsh industrial sites. -
Precise, Reliable Output
Low noise and high linearity ensure dependable measurements. -
Sealed, Rugged Design
Tolerates 100% humidity and challenging process conditions. -
Extensive Certifications
Approved for use in hazardous and explosive atmospheres (CE, ATEX, CSA, IECEx). -
Broad Application Versatility
Suitable for everything from critical turbines to industrial process machinery. -
Compatibility
Works with Bently Nevada 3300 XL Proximitor sensors and extension cables. -
Long Service Life
Engineered for years sur trouble-free operation without recalibration. -
Simplified Installation
Armored cable and standard connectors simplify field routing and setup.
Questions fréquentes (FAQ)
-
What machinery is this probe designed for?
It is ideal for turbines, compressors, motors, pumps, fans, and gearboxes. -
What is the benefit sur an armored cable?
The armor protects the cable from physical damage and abrasion during routing and operation. -
What is the length sur this particular model?
This version comes with a 0.5 meter cable. -
Can this probe handle outdoor environments?
Yes — it is sealed for 100% humidity and suitable for outdoor-rated enclosures. -
How does the probe measure shaft vibration?
It outputs a voltage proportional to the shaft’s dynamic position relative to the probe tip. -
Is this model certified for use in explosive environments?
Yes — it carries ATEX Zone 2, CE, CSA, and IECEx certifications. -
Does the probe require periodic recalibration?
No — the 3300 XL probes are designed for long-term stability without recalibration. -
What is the system’s frequency response?
0 Hz to 10 kHz (±3 dB). -
What shaft material is recommended?
4140 steel or equivalent, as per factory calibration. -
Is the probe compatible with older 3300 Proximitor modules?
Yes — it is backward compatible with most 3300 series Proximitor sensors.
Related Modèles from the Same Series or Catégorie
| Modèle | Product Type | Cable Length | Armor Type | Dimensions & Poids |
|---|---|---|---|---|
| 330104-00-20-05-02-00 | 3300 XL 8 mm Probe | 20 ft (6.10 m) | Armored | 8 mm tip, ~0.6 kg |
| 330104-00-15-10-01-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Non-armored | 8 mm tip, ~0.5 kg |
| 330104-00-10-10-01-CN | 3300 XL 8 mm Probe | 10 ft (3.05 m) | Non-armored | 8 mm tip, ~0.45 kg |
| 330104-00-05-05-02-00 | 3300 XL 8 mm Probe | 5 ft (1.52 m) | Armored | 8 mm tip, ~0.4 kg |
| 330104-00-15-05-02-00 | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Armored | 8 mm tip, ~0.55 kg |
| 330104-00-25-05-02-00 | 3300 XL 8 mm Probe | 25 ft (7.62 m) | Armored | 8 mm tip, ~0.65 kg |
Popular Modèles from Bently Nevada Product Line
| Modèle | Product Type | Application Area | Dimensions & Poids |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine Protection Systems | ~0.8 kg |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration, bearing wear | ~1.2 kg |
| 3500/33 | RTD/TC Temperature Monitor | Motor winding / bearing temp | ~1.1 kg |
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Drive matching probes | ~0.3 kg |
| 330180-50-00 | 3300 XL Proximitor Sensor | Drives 3300 XL 8 mm probes | ~0.5 kg |
| 3500/15 | Power Supply Module | 3500 Series Rack | ~1.5 kg |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.