Product Overview
The Bently Nevada 330104-00-20-05-02-00 3300 XL 8 mm Proximity Probe is a high-performance sensor designed for non-contact vibration and position measurement in rotating machinery. As part من the globally trusted 3300 XL series, this proximity probe operates using eddy current technology to deliver precise, real-time monitoring من shaft position and dynamic behavior.
Matched with a compatible extension cable and Proximitor sensor, this probe provides an accurate linear output corresponding to shaft-to-probe distance, enabling machine protection systems to detect mechanical degradation — before it results in costly unplanned downtime.
Built to operate in demanding industrial environments, this particular model — with a 0.5 meter total length, armor cable, and standard 8 mm tip — is ideal for critical machinery in power generation, oil & gas, refining, chemical processing, and other industries where robust, reliable measurements are essential for equipment health monitoring and protection.
مواصفات المنتج
| Parameter | Specification |
|---|---|
| الطراز | 330104-00-20-05-02-00 |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Sensing Technology | Eddy current, non-contact |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Thread Size | 3/8-24 UNF |
| Total Length | 0.5 meter |
| Cable Armor | Armored |
| Connector Type | Miniature coaxial connector |
| Target Material | 4140 steel (calibrated) |
| Measurement Range | 2 mm (80 mils), linear range |
| Scale Factor | 200 mV/mil (7.87 mV/μm) nominal |
| System Linear Range | 80 mils (2.0 mm) |
| Non-Linearity | ≤ ±0.75% من full scale (typical) |
| Frequency Response | 0 Hz to 10 kHz (±3 dB) |
| Operating Temperature (Probe) | -51 °C to +177 °C |
| Operating Temperature (System) | -35 °C to +120 °C |
| Humidity | 100% condensing, sealed |
| Shock / Vibration Tolerance | 10 g @ 10-2,000 Hz |
| Pressure Rating | 5 bar (sealed probe tip) |
| Certifications | CE, ATEX Zone 2, CSA, IECEx |
| الوزن | 0.161 kg |
Applications
The 330104-00-20-05-02-00 3300 XL 8 mm Proximity Probe is widely used across many industries for condition monitoring and protection من critical rotating machinery:
-
Gas & Steam Turbines
Monitoring shaft vibration and axial position for predictive maintenance and protection. -
Compressors
Detecting excessive vibration and shaft displacement in centrifugal and reciprocating compressors. -
Electric Motors
Providing early warnings من imbalance, misalignment, and bearing wear. -
Pumps
Safeguarding pump shafts in chemical, refining, and water/wastewater industries. -
Gearboxes
Monitoring rotational dynamics and gear mesh conditions. -
Paper Machines, Blowers, and Fans
Protecting against excessive mechanical wear and operational inefficiencies. -
Power Generation
Ensuring turbine generator health in fossil, nuclear, and renewable plants.
Product Advantages
-
Trusted Global Standard
The 3300 XL 8 mm system is the world’s most widely used proximity transducer system. -
Wide Temperature Capability
Rated up to 177 °C for probe tip operation — suited to hot machinery environments. -
Robust Armor Cable
Provides mechanical protection for long cable runs in harsh industrial sites. -
Precise, Reliable Output
Low noise and high linearity ensure dependable measurements. -
Sealed, Rugged Design
Tolerates 100% humidity and challenging process conditions. -
Extensive Certifications
Approved for use in hazardous and explosive atmospheres (CE, ATEX, CSA, IECEx). -
Broad Application Versatility
Suitable for everything from critical turbines to industrial process machinery. -
Compatibility
Works with Bently Nevada 3300 XL Proximitor sensors and extension cables. -
Long Service Life
Engineered for years من trouble-free operation without recalibration. -
Simplified Installation
Armored cable and standard connectors simplify field routing and setup.
الأسئلة الشائعة (FAQ)
-
What machinery is this probe designed for?
It is ideal for turbines, compressors, motors, pumps, fans, and gearboxes. -
What is the benefit من an armored cable?
The armor protects the cable from physical damage and abrasion during routing and operation. -
What is the length من this particular model?
This version comes with a 0.5 meter cable. -
Can this probe handle outdoor environments?
Yes — it is sealed for 100% humidity and suitable for outdoor-rated enclosures. -
How does the probe measure shaft vibration?
It outputs a voltage proportional to the shaft’s dynamic position relative to the probe tip. -
Is this model certified for use in explosive environments?
Yes — it carries ATEX Zone 2, CE, CSA, and IECEx certifications. -
Does the probe require periodic recalibration?
No — the 3300 XL probes are designed for long-term stability without recalibration. -
What is the system’s frequency response?
0 Hz to 10 kHz (±3 dB). -
What shaft material is recommended?
4140 steel or equivalent, as per factory calibration. -
Is the probe compatible with older 3300 Proximitor modules?
Yes — it is backward compatible with most 3300 series Proximitor sensors.
Related الطرازs from the Same Series or الفئة
| الطراز | Product Type | Cable Length | Armor Type | Dimensions & الوزن |
|---|---|---|---|---|
| 330104-00-20-05-02-00 | 3300 XL 8 mm Probe | 20 ft (6.10 m) | Armored | 8 mm tip, ~0.6 kg |
| 330104-00-15-10-01-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Non-armored | 8 mm tip, ~0.5 kg |
| 330104-00-10-10-01-CN | 3300 XL 8 mm Probe | 10 ft (3.05 m) | Non-armored | 8 mm tip, ~0.45 kg |
| 330104-00-05-05-02-00 | 3300 XL 8 mm Probe | 5 ft (1.52 m) | Armored | 8 mm tip, ~0.4 kg |
| 330104-00-15-05-02-00 | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Armored | 8 mm tip, ~0.55 kg |
| 330104-00-25-05-02-00 | 3300 XL 8 mm Probe | 25 ft (7.62 m) | Armored | 8 mm tip, ~0.65 kg |
Popular الطرازs from Bently Nevada Product Line
| الطراز | Product Type | Application Area | Dimensions & الوزن |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine Protection Systems | ~0.8 kg |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration, bearing wear | ~1.2 kg |
| 3500/33 | RTD/TC Temperature Monitor | Motor winding / bearing temp | ~1.1 kg |
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Drive matching probes | ~0.3 kg |
| 330180-50-00 | 3300 XL Proximitor Sensor | Drives 3300 XL 8 mm probes | ~0.5 kg |
| 3500/15 | Power Supply Module | 3500 Series Rack | ~1.5 kg |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.