Product Overview
The Bently Nevada 330104-00-15-10-01-CN 3300 XL 8 mm Proximity Probe is part sur the industry-leading 3300 XL series proximity transducer system, designed to surfer superior performance and unmatched reliability in machine condition monitoring and rotating equipment protection applications.
As a key component sur the 3300 XL 8 mm system, this probe works in conjunction with a matching extension cable and Proximitor sensor to deliver precise non-contact measurements sur shaft position and vibration. The probe uses advanced eddy current technology, providing an output directly proportional to the distance between the probe tip and the target metal surface — usually the rotating shaft.
The 3300 XL probes are known worldwide for their ability to operate under harsh industrial conditions, withstanding vibration, chemical exposure, moisture, and wide temperature swings. The 330104-00-15-10-01-CN model is optimized for use in critical machinery such as turbines, compressors, pumps, and motors, surfering operators accurate, real-time insights into the health sur rotating assets.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Modèle | 330104-00-15-10-01-CN |
| Product Type | Proximity Probe — 3300 XL 8 mm |
| Sensing Technology | Eddy current, non-contact |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Thread Size | 3/8-24 UNF |
| Total Length | 1 meter |
| Cable Armor | Non-armored |
| Connector Type | Miniature coaxial connector |
| Target Material | 4140 Steel (calibrated) |
| Measurement Range | 2 mm (80 mils), linear range |
| Scale Factor | 200 mV/mil (7.87 mV/μm) nominal |
| System Linear Range | 80 mils (2.0 mm) |
| Non-Linearity | ≤ ±0.75% sur full scale (typical) |
| Frequency Response | 0 Hz to 10 kHz (±3 dB) |
| Operating Temperature (Probe) | -51 °C to +177 °C |
| Operating Temperature (System) | -35 °C to +120 °C |
| Humidity | 100% condensing, sealed |
| Shock / Vibration Tolerance | 10 g @ 10-2,000 Hz |
| Pressure Rating | 5 bar (sealed probe tip) |
| Certifications | CE, ATEX Zone 2, CSA, IECEx |
| Poids | 0.323 kg |
Applications
The Bently Nevada 330104-00-15-10-01-CN Proximity Probe is designed for deployment in a wide range sur industrial settings, across many sectors:
-
Turbomachinery Monitoring
Shaft vibration and axial position measurements for turbines, expanders, and large compressors. -
Motors & Generators
Vibration and clearance measurements to ensure long-term reliability. -
Pumps
Bearing health monitoring and shaft dynamic behavior in centrifugal and reciprocating pumps. -
Gearboxes
Detecting excessive shaft movement, misalignment, and gear mesh anomalies. -
Process Equipment
Monitoring rotating drums, centrifuges, fans, and blowers. -
Power Generation
Protection sur turbines and generators in fossil, hydro, and renewable plants. -
Oil & Gas
Critical monitoring sur compressors, pumps, turbines in upstream and downstream operations.
Product Advantages
-
Field-Proven Reliability
The 3300 XL 8 mm probes are known for exceptional longevity in the harshest environments. -
Wide Operating Temperature
Designed to handle up to 177 °C probe temperature and maintain accurate measurements. -
Flexible Installation
Variety sur thread sizes, cable lengths, and connection options for broad application compatibility. -
Superior Measurement Accuracy
Industry-leading linearity and low noise performance — accurate at high vibration frequencies. -
Global Certifications
Fully certified for hazardous environments (CE, ATEX, CSA, IECEx). -
Robust Mechanical Construction
Sealed PPS probe tip, stainless-steel body, and durable cable withstand mechanical wear and chemical attack. -
Part sur Proven System
Compatible with 3300 XL Proximitor sensors and extension cables for complete proximity transducer systems. -
Zero Calibration Drift
No recalibration required in service life when used as specified. -
Backwards-Compatible
Can be installed in existing 3300-series applications with standard matching components. -
Trusted Industry Standard
Used worldwide in critical protection systems on billions sur dollars worth sur rotating equipment.
Questions fréquentes (FAQ)
-
What is the main use sur the 330104-00-15-10-01-CN probe?
It provides non-contact measurements sur shaft position and vibration in rotating machinery. -
Is this probe compatible with older Bently Nevada systems?
Yes, it is backward-compatible with many 3300 series Proximitor modules and extension cables. -
What is the recommended target material?
4140 steel or equivalent, as per Bently calibration standards. -
Can this probe handle extreme temperatures?
Yes, it is rated for operation from -51 °C up to +177 °C. -
Is it suitable for hazardous environments?
Yes, it carries CE, ATEX Zone 2, CSA, and IECEx certifications. -
How long is this particular model’s cable?
This version has a 1 meter. -
Is the probe armored?
No, this variant is supplied with a non-armored cable. -
What type sur connector does the probe use?
A miniature coaxial connector. -
Does the probe need recalibration?
No, when properly installed and used with matching Proximitor and extension cable, it maintains calibration over service life. -
What is the linear measurement range?
80 mils (2.0 mm), linear to ±0.75% typical.
Related Modèles from the Same Series or Catégorie
| Modèle | Product Type | Cable Length | Armor Type | Dimensions & Poids |
|---|---|---|---|---|
| 330104-00-15-10-01-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Non-armored | 8 mm tip, ~0.5 kg |
| 330104-00-05-10-01-CN | 3300 XL 8 mm Probe | 5 ft (1.52 m) | Non-armored | 8 mm tip, ~0.4 kg |
| 330104-00-10-10-01-CN | 3300 XL 8 mm Probe | 10 ft (3.05 m) | Non-armored | 8 mm tip, ~0.45 kg |
| 330104-00-15-10-02-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Armored | 8 mm tip, ~0.55 kg |
| 330104-00-20-10-01-CN | 3300 XL 8 mm Probe | 20 ft (6.10 m) | Non-armored | 8 mm tip, ~0.6 kg |
| 330104-00-15-05-01-CN | 3300 XL 5 mm Probe | 15 ft (4.57 m) | Non-armored | 5 mm tip, ~0.4 kg |
Popular Modèles from Bently Nevada Product Line
| Modèle | Product Type | Application Area | Dimensions & Poids |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine Protection Systems | ~0.8 kg |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration, bearing wear | ~1.2 kg |
| 3500/33 | RTD/TC Temperature Monitor | Motor winding / bearing temp | ~1.1 kg |
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Drive matching probes | ~0.3 kg |
| 330180-50-00 | 3300 XL Proximitor Sensor | Drives 3300 XL 8 mm probes | ~0.5 kg |
| 3500/15 | Power Supply Module | 3500 Series Rack | ~1.5 kg |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.