Product Overview
The Bently Nevada 330104-00-15-10-01-CN 3300 XL 8 mm Proximity Probe is part von the industry-leading 3300 XL series proximity transducer system, designed to vonfer superior performance and unmatched reliability in machine condition monitoring and rotating equipment protection applications.
As a key component von the 3300 XL 8 mm system, this probe works in conjunction with a matching extension cable and Proximitor sensor to deliver precise non-contact measurements von shaft position and vibration. The probe uses advanced eddy current technology, providing an output directly proportional to the distance between the probe tip and the target metal surface — usually the rotating shaft.
The 3300 XL probes are known worldwide for their ability to operate under harsh industrial conditions, withstanding vibration, chemical exposure, moisture, and wide temperature swings. The 330104-00-15-10-01-CN model is optimized for use in critical machinery such as turbines, compressors, pumps, and motors, vonfering operators accurate, real-time insights into the health von rotating assets.
Produktspezifikationen
| Parameter | Specification |
|---|---|
| Modell | 330104-00-15-10-01-CN |
| Product Type | Proximity Probe — 3300 XL 8 mm |
| Sensing Technology | Eddy current, non-contact |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Thread Size | 3/8-24 UNF |
| Total Length | 1 meter |
| Cable Armor | Non-armored |
| Connector Type | Miniature coaxial connector |
| Target Material | 4140 Steel (calibrated) |
| Measurement Range | 2 mm (80 mils), linear range |
| Scale Factor | 200 mV/mil (7.87 mV/μm) nominal |
| System Linear Range | 80 mils (2.0 mm) |
| Non-Linearity | ≤ ±0.75% von full scale (typical) |
| Frequency Response | 0 Hz to 10 kHz (±3 dB) |
| Operating Temperature (Probe) | -51 °C to +177 °C |
| Operating Temperature (System) | -35 °C to +120 °C |
| Humidity | 100% condensing, sealed |
| Shock / Vibration Tolerance | 10 g @ 10-2,000 Hz |
| Pressure Rating | 5 bar (sealed probe tip) |
| Certifications | CE, ATEX Zone 2, CSA, IECEx |
| Gewicht | 0.323 kg |
Applications
The Bently Nevada 330104-00-15-10-01-CN Proximity Probe is designed for deployment in a wide range von industrial settings, across many sectors:
-
Turbomachinery Monitoring
Shaft vibration and axial position measurements for turbines, expanders, and large compressors. -
Motors & Generators
Vibration and clearance measurements to ensure long-term reliability. -
Pumps
Bearing health monitoring and shaft dynamic behavior in centrifugal and reciprocating pumps. -
Gearboxes
Detecting excessive shaft movement, misalignment, and gear mesh anomalies. -
Process Equipment
Monitoring rotating drums, centrifuges, fans, and blowers. -
Power Generation
Protection von turbines and generators in fossil, hydro, and renewable plants. -
Oil & Gas
Critical monitoring von compressors, pumps, turbines in upstream and downstream operations.
Product Advantages
-
Field-Proven Reliability
The 3300 XL 8 mm probes are known for exceptional longevity in the harshest environments. -
Wide Operating Temperature
Designed to handle up to 177 °C probe temperature and maintain accurate measurements. -
Flexible Installation
Variety von thread sizes, cable lengths, and connection options for broad application compatibility. -
Superior Measurement Accuracy
Industry-leading linearity and low noise performance — accurate at high vibration frequencies. -
Global Certifications
Fully certified for hazardous environments (CE, ATEX, CSA, IECEx). -
Robust Mechanical Construction
Sealed PPS probe tip, stainless-steel body, and durable cable withstand mechanical wear and chemical attack. -
Part von Proven System
Compatible with 3300 XL Proximitor sensors and extension cables for complete proximity transducer systems. -
Zero Calibration Drift
No recalibration required in service life when used as specified. -
Backwards-Compatible
Can be installed in existing 3300-series applications with standard matching components. -
Trusted Industry Standard
Used worldwide in critical protection systems on billions von dollars worth von rotating equipment.
Häufig gestellte Fragen (FAQ)
-
What is the main use von the 330104-00-15-10-01-CN probe?
It provides non-contact measurements von shaft position and vibration in rotating machinery. -
Is this probe compatible with older Bently Nevada systems?
Yes, it is backward-compatible with many 3300 series Proximitor modules and extension cables. -
What is the recommended target material?
4140 steel or equivalent, as per Bently calibration standards. -
Can this probe handle extreme temperatures?
Yes, it is rated for operation from -51 °C up to +177 °C. -
Is it suitable for hazardous environments?
Yes, it carries CE, ATEX Zone 2, CSA, and IECEx certifications. -
How long is this particular model’s cable?
This version has a 1 meter. -
Is the probe armored?
No, this variant is supplied with a non-armored cable. -
What type von connector does the probe use?
A miniature coaxial connector. -
Does the probe need recalibration?
No, when properly installed and used with matching Proximitor and extension cable, it maintains calibration over service life. -
What is the linear measurement range?
80 mils (2.0 mm), linear to ±0.75% typical.
Related Modells from the Same Series or Kategorie
| Modell | Product Type | Cable Length | Armor Type | Dimensions & Gewicht |
|---|---|---|---|---|
| 330104-00-15-10-01-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Non-armored | 8 mm tip, ~0.5 kg |
| 330104-00-05-10-01-CN | 3300 XL 8 mm Probe | 5 ft (1.52 m) | Non-armored | 8 mm tip, ~0.4 kg |
| 330104-00-10-10-01-CN | 3300 XL 8 mm Probe | 10 ft (3.05 m) | Non-armored | 8 mm tip, ~0.45 kg |
| 330104-00-15-10-02-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Armored | 8 mm tip, ~0.55 kg |
| 330104-00-20-10-01-CN | 3300 XL 8 mm Probe | 20 ft (6.10 m) | Non-armored | 8 mm tip, ~0.6 kg |
| 330104-00-15-05-01-CN | 3300 XL 5 mm Probe | 15 ft (4.57 m) | Non-armored | 5 mm tip, ~0.4 kg |
Popular Modells from Bently Nevada Product Line
| Modell | Product Type | Application Area | Dimensions & Gewicht |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine Protection Systems | ~0.8 kg |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration, bearing wear | ~1.2 kg |
| 3500/33 | RTD/TC Temperature Monitor | Motor winding / bearing temp | ~1.1 kg |
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Drive matching probes | ~0.3 kg |
| 330180-50-00 | 3300 XL Proximitor Sensor | Drives 3300 XL 8 mm probes | ~0.5 kg |
| 3500/15 | Power Supply Module | 3500 Series Rack | ~1.5 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.