Overview
The Bently Nevada 330104-00-15-05-02-00 is part sur the 3300 XL 8 mm Proximity Transducer System, engineered for precise vibration and position measurements. It includes an 8 mm probe with M10×1 thread, armored cable, and high-reliability ClickLoc connectors. Designed for compatibility, this probe ensures robust performance in high-temperature and hazardous environments.
Applications
-
Shaft vibration and position monitoring
-
Turbine and compressor protection
-
Keyphasor speed detection
-
État monitoring on rotating equipment
Advantages
-
Interchangeable system: Full compatibility across 3300 XL components
-
High-temperature resistance: Up to 218°C probe tip, 260°C cable
-
EMI/RFI immunitéy: Enhanced reliability in industrial environments
-
Durability: TipLoc and CableLoc technologies ensure robust mechanical design
-
No calibration required: Factory-calibrated to AISI 4140 steel
Technical Specifications
| Parameter | Specification |
|---|---|
| Modèle | 330104-00-15-05-02-00 |
| System Type | 3300 XL 8 mm Proximity Probe |
| Thread Size | M10 x 1 |
| Total Length | 0.5 meter |
| Poids | 0.162 kg |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Case Material | AISI 304 stainless steel |
| Cable Type | 75Ω triaxial, FEP insulated with armor |
| Connector Type | Miniature coaxial ClickLoc (standard cable) |
| Operating Temperature | -52°C to +177°C (probe), up to 260°C (cable) |
| Frequency Response | 0–10 kHz (±3 dB) |
| Linear Range | 2 mm (80 mils) |
| Output Sensitivity | 200 mV/mil ±5% (standard system) |
| Recommended Shaft Diameter | ≥76.2 mm (3 in) |
| Pressure Seal | Viton O-ring between probe tip and case |
| Certifications | CSA, ATEX, IECEx, CE, RoHS |
FAQs
Q1: What does the part number 330104-00-15-05-02-00 signify?
A1: It indicates a 0.5-meter M10×1 probe with armor, ClickLoc connector, and ATEX/IECEx certification.
Q2: Can this probe operate in high-temperature zones?
A2: Yes. The probe tip withstands up to 218°C and the armored cable up to 260°C.
Q3: Is the probe suitable for use in hazardous areas?
A3: Yes, it has certifications including CSA, ATEX, and IECEx for Zone 0/1 hazardous areas.
Q4: Can the probe be used without the Proximitor sensor?
A4: N° It must be paired with a 3300 XL Proximitor Sensor for operation.
Q5: Is field calibration necessary?
A5: N° All probes are factory-calibrated and interchangeable within the same system.
Q6: What is the minimum recommended shaft diameter?
A6: 76.2 mm (3 inches) is recommended for minimal cross-talk and accurate readings.
Q7: What kind sur output does it provide?
A7: Voltage output proportional to the distance between the probe tip and the target surface.
Q8: Is the connector tool-free?
A8: Yes. The ClickLoc connector requires no special tools for installation or removal.
Q9: What is the cable’s tensile strength?
A9: 330 N from probe body to cable, 270 N at the connector.
Q10: What environmental protection features are included in the probe design?
A10: The probe uses a Viton® O-ring for pressure sealing and features gold-plated ClickLoc connectors with optional connector protectors for enhanced environmental durability and isolation.
Related Modèles from Same Series
| Modèle Number | Thread Type | Armor | Length | Temp Rating | Poids (kg) |
|---|---|---|---|---|---|
| 330104-00-15-05-02-00 | M10 x 1 | Yes | 0.5 m | Standard | 0.162 |
| 330104-00-15-10-02-00 | M10 x 1 | No | 1.0 m | Standard | 0.185 |
| 330104-00-15-50-02-00 | M10 x 1 | Yes | 5.0 m | Standard | 0.320 |
| 330194-00-15-05-02-05 | M10 x 1 | Yes | 0.5 m | ETR | 0.170 |
| 330103-00-15-05-02-00 | M10 x 1 | No | 0.5 m | Standard | 0.150 |
| 330106-05-30-10-02-00 | M10 x 1 | No | 1.0 m | Reverse Mount | 0.180 |
Popular Bently Nevada Modèles
| Modèle Number | Description | Application | Poids (kg) | Temp Rating |
|---|---|---|---|---|
| 330180-91-00 | 3300 XL Proximitor Sensor, DIN mount, 9 m | Panel/DIN rail mount | 0.246 | +100°C |
| 330130-040-00-00 | 4.0 m Extension Cable | Probe extension | 0.136 | +177°C |
| 330103-00-15-05-02-00 | 8 mm Probe, M10 thread, no armor | Standard application | 0.150 | +177°C |
| 3300/20 | Dual Channel Monitor | Vibration and axial position | ~1.2 | +65°C |
| 3500/42M | Proximitor Seismic Monitor Module | Shaft vibration monitoring | ~0.9 | +65°C |
| 3500/22M | Transient Data Interface (TDI) Module | System communication/data interface | ~0.8 | +60°C |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.