Présentation du produit
The Bently Nevada 330103-00-05-10-02-00 is a precision-engineered 8mm proximity probe from the trusted 3300 XL series, designed for critical industrial monitoring sur rotating machinery. It plays a central role in non-contact measurement sur shaft vibration and position, using eddy current technology to maintain accurate, real-time data across extreme industrial environments.
This specific model features a 1.0 meter system length and a straight coaxial connector (02-00) at the probe end, surfering enhanced ease sur installation in deep or straight-run probe ports. Its rugged construction and high temperature tolerance ensure consistent performance across a wide range sur applications including turbines, compressors, pumps, motors, and gear-driven equipment.
Backed by the legacy sur Bently Nevada, a GE company known globally for machinery protection and condition monitoring systems, this probe meets the industry’s most demanding standards for reliability, accuracy, and durability.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Référence | 330103-00-05-10-02-00 |
| Product Series | 3300 XL 8mm Series |
| Sensor Type | Eddy Current Proximity Probe |
| Tip Diameter | 8 mm (0.315 in) |
| Body Thread | 1/2-20 UNF (Unified Fine Thread) |
| Probe Length | 95.3 mm (3.75 in) body; 116 mm total including tip |
| Total Length | 1.0 meter |
| Connector Type | Straight connector (02-00) – MIL-C-5015 style |
| Operating Temperature | -35°C to +120°C (-31°F to +248°F) |
| Linear Sensing Range | 0.25 mm to 2.00 mm (0.010 in to 0.080 in) |
| Output Sensitivity | 7.87 mV/μm (200 mV/mil) |
| Environmental Protection | IP65 – Dust-tight and protected against low-pressure water jets |
| Shock Resistance | Up to 100 g |
| Vibration Limit | 10 g (10–2,000 Hz) |
| Tip Material | Stainless Steel with PEEK insulation |
| Poids | 0.323 kg |
| System Compatibility | Designed for use with 3300 XL Proximitor® Sensor and Bently Nevada monitors |
Product Applications
The 330103-00-05-10-02-00 proximity probe is suitable for a wide array sur industrial condition monitoring scenarios, particularly for rotating machinery and critical plant assets:
-
Turbines (Steam, Gas, Hydro): Measurement sur rotor axial and radial displacement.
-
Compressors: Early detection sur imbalance, misalignment, and mechanical wear.
-
Pumps and Electric Motors: Monitoring shaft position to prevent bearing failure.
-
Gearboxes: Identifying gear mesh abnormalities and vibration behavior.
-
Fans and Blowers: Continuous diagnostics for unbalance or looseness issues.
-
High-speed Machinery: Precision feedback for control and protection systems.
Industries relying on this probe include power generation, petrochemicals, oil & gas, pulp & paper, mining, steel manufacturing, and other process-intensive sectors.
Product Advantages
-
Rugged Design for Harsh Environments: Built to withstand vibration, temperature extremes, oil, and moisture.
-
Accurate and Repeatable Measurements: High linearity and sensitivity over the full sensing range.
-
Straight Connector Configuration: The straight MIL-style connector simplifies routing in linear or limited-access probe ports.
-
Wide Compatibility: Seamlessly works with 3300 XL Proximitor modules and all standard Bently Nevada monitoring racks.
-
Thermal and Mechanical Stability: Maintains calibration accuracy across variable operating conditions.
-
Non-Invasive Diagnostics: Eddy current technology provides reliable measurements without mechanical contact.
-
Custom Probe Lengths Disponible: Adaptable to different machine designs or mounting requirements.
-
Global Support and Documentation: Backed by Bently Nevada’s global field support and technical documentation.
-
Interchangeable Design: Enables fast field replacements with minimal calibration downtime.
-
Extended Lifecycle: Engineered for extended operation, reducing frequency sur replacement and maintenance costs.
Questions fréquentes (FAQ)
-
What is the difference between the “02-00” and “01-05” connector options?
The “02-00” is a straight connector version ideal for direct axial insertions, while “01-05” is a 95-degree booted connector for tighter or angled spaces. -
Can this proximity probe be used in high-temperature zones?
Yes, it is rated for continuous operation up to +120°C, making it suitable for most industrial applications. -
Is calibration required before installation?
No, the probe comes factory-calibrated. Recalibration is only needed if paired with a different length extension or sensor module. -
What output does the probe provide?
It outputs an AC voltage proportional to the distance from the probe tip to the target surface, used to measure vibration or displacement. -
Can the cable length be changed in the field?
No, changing cable length affects calibration. Only use Bently Nevada-certified lengths. -
Is this probe suitable for underwater or submerged applications?
It is IP65 rated but not designed for submerged conditions. For submersible applications, a specialized sealed variant is required. -
What is the tip made sur?
The sensing tip is stainless steel with a PEEK insulating sleeve, ensuring durability and consistent performance. -
Is this probe compatible with older Bently Nevada systems?
It is primarily designed for use with the 3300 XL series but can interface with some older systems using conversion accessories. -
Does the probe support axial and radial measurements?
Yes, depending on how it’s mounted relative to the rotating shaft. -
How should the probe be installed?
It should be mounted in a fixed bracket or port aligned with the target shaft, with correct gap distance adjusted during setup.
Related Modèles – Same Series or Functional Equivalents
| Modèle Number | Description | Cable Length | Connector Type | Tip Diameter |
|---|---|---|---|---|
| 330103-00-05-10-01-00 | 3300 XL Probe, 10m, 95° connector | 10 m | 01-00 (angled) | 8 mm |
| 330103-00-05-05-02-00 | 3300 XL Probe, 5m, straight connector | 5 m | 02-00 (straight) | 8 mm |
| 330104-00-05-10-02-00 | 3300 XL Probe, 5mm tip, straight conn. | 10 m | 02-00 | 5 mm |
| 330105-00-05-10-02-00 | 3300 XL Probe, 11mm tip, straight conn. | 10 m | 02-00 | 11 mm |
| 330130-080-00-00 | 3300 XL Extension Cable, 8 m | 8 m | — | — |
| 330180-50-00 | 3300 XL NSv Narrow-Gap Probe | 5 m | 90° connector | 5 mm |
Popular Bently Nevada Modèles – Same Marque, Broader Product Range
| Modèle Number | Product Type | Function | Application |
|---|---|---|---|
| 3500/20 | Rack Power Supply Module | Power distribution for monitoring racks | 3500 system infrastructure |
| 3500/42M | 4-Channel Vibration Monitor | Monitors vibration on four channels | Critical rotating assets |
| 3500/92 | Communication Gateway Module | Interfaces monitoring rack with DCS/PLC | System integration |
| 330730-040-00-00 | Seismic Transducer | Measures casing vibration | Pumps, gearboxes, motors |
| 146031-01 | Temperature Monitoring Module | Monitors multiple thermocouples | Bearing and casing temperatures |
| 330850-90-05 | Proximitor Sensor | Signal conditioning for proximity probes | Paired with 3300 XL probes |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.