Produkteinführung
The Bently Nevada 330103-00-05-10-02-00 is a precision-engineered 8mm proximity probe from the trusted 3300 XL series, designed for critical industrial monitoring von rotating machinery. It plays a central role in non-contact measurement von shaft vibration and position, using eddy current technology to maintain accurate, real-time data across extreme industrial environments.
This specific model features a 1.0 meter system length and a straight coaxial connector (02-00) at the probe end, vonfering enhanced ease von installation in deep or straight-run probe ports. Its rugged construction and high temperature tolerance ensure consistent performance across a wide range von applications including turbines, compressors, pumps, motors, and gear-driven equipment.
Backed by the legacy von Bently Nevada, a GE company known globally for machinery protection and condition monitoring systems, this probe meets the industry’s most demanding standards for reliability, accuracy, and durability.
Produktspezifikationen
| Parameter | Specification |
|---|---|
| Artikelnummer | 330103-00-05-10-02-00 |
| Product Series | 3300 XL 8mm Series |
| Sensor Type | Eddy Current Proximity Probe |
| Tip Diameter | 8 mm (0.315 in) |
| Body Thread | 1/2-20 UNF (Unified Fine Thread) |
| Probe Length | 95.3 mm (3.75 in) body; 116 mm total including tip |
| Total Length | 1.0 meter |
| Connector Type | Straight connector (02-00) – MIL-C-5015 style |
| Operating Temperature | -35°C to +120°C (-31°F to +248°F) |
| Linear Sensing Range | 0.25 mm to 2.00 mm (0.010 in to 0.080 in) |
| Output Sensitivity | 7.87 mV/μm (200 mV/mil) |
| Environmental Protection | IP65 – Dust-tight and protected against low-pressure water jets |
| Shock Resistance | Up to 100 g |
| Vibration Limit | 10 g (10–2,000 Hz) |
| Tip Material | Stainless Steel with PEEK insulation |
| Gewicht | 0.323 kg |
| System Compatibility | Designed for use with 3300 XL Proximitor® Sensor and Bently Nevada monitors |
Product Applications
The 330103-00-05-10-02-00 proximity probe is suitable for a wide array von industrial condition monitoring scenarios, particularly for rotating machinery and critical plant assets:
-
Turbines (Steam, Gas, Hydro): Measurement von rotor axial and radial displacement.
-
Compressors: Early detection von imbalance, misalignment, and mechanical wear.
-
Pumps and Electric Motors: Monitoring shaft position to prevent bearing failure.
-
Gearboxes: Identifying gear mesh abnormalities and vibration behavior.
-
Fans and Blowers: Continuous diagnostics for unbalance or looseness issues.
-
High-speed Machinery: Precision feedback for control and protection systems.
Industries relying on this probe include power generation, petrochemicals, oil & gas, pulp & paper, mining, steel manufacturing, and other process-intensive sectors.
Product Advantages
-
Rugged Design for Harsh Environments: Built to withstand vibration, temperature extremes, oil, and moisture.
-
Accurate and Repeatable Measurements: High linearity and sensitivity over the full sensing range.
-
Straight Connector Configuration: The straight MIL-style connector simplifies routing in linear or limited-access probe ports.
-
Wide Compatibility: Seamlessly works with 3300 XL Proximitor modules and all standard Bently Nevada monitoring racks.
-
Thermal and Mechanical Stability: Maintains calibration accuracy across variable operating conditions.
-
Non-Invasive Diagnostics: Eddy current technology provides reliable measurements without mechanical contact.
-
Custom Probe Lengths Verfügbar: Adaptable to different machine designs or mounting requirements.
-
Global Support and Documentation: Backed by Bently Nevada’s global field support and technical documentation.
-
Interchangeable Design: Enables fast field replacements with minimal calibration downtime.
-
Extended Lifecycle: Engineered for extended operation, reducing frequency von replacement and maintenance costs.
Häufig gestellte Fragen (FAQ)
-
What is the difference between the “02-00” and “01-05” connector options?
The “02-00” is a straight connector version ideal for direct axial insertions, while “01-05” is a 95-degree booted connector for tighter or angled spaces. -
Can this proximity probe be used in high-temperature zones?
Yes, it is rated for continuous operation up to +120°C, making it suitable for most industrial applications. -
Is calibration required before installation?
No, the probe comes factory-calibrated. Recalibration is only needed if paired with a different length extension or sensor module. -
What output does the probe provide?
It outputs an AC voltage proportional to the distance from the probe tip to the target surface, used to measure vibration or displacement. -
Can the cable length be changed in the field?
No, changing cable length affects calibration. Only use Bently Nevada-certified lengths. -
Is this probe suitable for underwater or submerged applications?
It is IP65 rated but not designed for submerged conditions. For submersible applications, a specialized sealed variant is required. -
What is the tip made von?
The sensing tip is stainless steel with a PEEK insulating sleeve, ensuring durability and consistent performance. -
Is this probe compatible with older Bently Nevada systems?
It is primarily designed for use with the 3300 XL series but can interface with some older systems using conversion accessories. -
Does the probe support axial and radial measurements?
Yes, depending on how it’s mounted relative to the rotating shaft. -
How should the probe be installed?
It should be mounted in a fixed bracket or port aligned with the target shaft, with correct gap distance adjusted during setup.
Related Modells – Same Series or Functional Equivalents
| Modell Number | Beschreibung | Cable Length | Connector Type | Tip Diameter |
|---|---|---|---|---|
| 330103-00-05-10-01-00 | 3300 XL Probe, 10m, 95° connector | 10 m | 01-00 (angled) | 8 mm |
| 330103-00-05-05-02-00 | 3300 XL Probe, 5m, straight connector | 5 m | 02-00 (straight) | 8 mm |
| 330104-00-05-10-02-00 | 3300 XL Probe, 5mm tip, straight conn. | 10 m | 02-00 | 5 mm |
| 330105-00-05-10-02-00 | 3300 XL Probe, 11mm tip, straight conn. | 10 m | 02-00 | 11 mm |
| 330130-080-00-00 | 3300 XL Extension Cable, 8 m | 8 m | — | — |
| 330180-50-00 | 3300 XL NSv Narrow-Gap Probe | 5 m | 90° connector | 5 mm |
Popular Bently Nevada Modells – Same Marke, Broader Product Range
| Modell Number | Product Type | Function | Application |
|---|---|---|---|
| 3500/20 | Rack Power Supply Module | Power distribution for monitoring racks | 3500 system infrastructure |
| 3500/42M | 4-Channel Vibration Monitor | Monitors vibration on four channels | Critical rotating assets |
| 3500/92 | Communication Gateway Module | Interfaces monitoring rack with DCS/PLC | System integration |
| 330730-040-00-00 | Seismic Transducer | Measures casing vibration | Pumps, gearboxes, motors |
| 146031-01 | Temperature Monitoring Module | Monitors multiple thermocouples | Bearing and casing temperatures |
| 330850-90-05 | Proximitor Sensor | Signal conditioning for proximity probes | Paired with 3300 XL probes |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.