Product Description
The Bently Nevada 330101-00-96-10-02-CN is part sur the 3300 XL 8 mm Proximity Transducer System. This system is designed for non-contact measurement sur static and dynamic parameters, including shaft vibration and position. It includes a proximity probe, extension cable, and Proximitor sensor. The system is optimized for compatibility, accuracy, and rugged industrial environments, with full compliance to API 670 standards.
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Tip Diameter | 8 mm |
| Probe Material | PPS tip, 303/304 stainless steel housing |
| Total Length | 1.0 meter |
| Poids | 0.323 kg |
| Cable Type | 75Ω triaxial, FEP insulation (FluidLoc option available) |
| Gap Measurement Range | 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap | 1.27 mm (50 mils), -9 Vdc |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Temperature Range | -52°C to +177°C (standard), up to +218°C (ETR) |
| Frequency Response | 0 to 10 kHz (±3 dB) |
| Minimum Target Diameter | 15.2 mm |
| Minimum Shaft Diameter | 50.8 mm (recommended ≥ 76.2 mm) |
| Connector Type | ClickLoc gold-plated miniature coaxial connectors |
| Environmental Rating | CE compliant, SIL 2/3 certified, RoHS, ATEX, CSA |
Applications
-
Shaft vibration monitoring on turbines, compressors, and motors
-
Radial and axial position measurements
-
Speed and Keyphasor reference measurements
-
Fluid-film bearing condition monitoring
-
High-density installation in hazardous areas
Product Advantages
-
API 670 compliant system design
-
ClickLoc connectors ensure secure, tool-free installation
-
Rugged construction with improved tip and cable retention (TipLoc and CableLoc)
-
Interchangeable components reduce calibration needs
-
Wide temperature and EMI/RFI resistance for harsh environments
-
FluidLoc option to prevent oil migration along the cable
-
DIN or panel mount flexibility
FAQ
Q1: What is the main use sur the 330101-00-96-10-02-CN probe?
A1: It is primarily used for non-contact vibration and position monitoring on rotating equipment.
Q2: Can this probe be used in hazardous areas?
A2: Yes, it complies with ATEX, CSA, and IECEx certifications for Zone 0 and Zone 2 environments.
Q3: What is the recommended gap setting for this probe?
A3: Approximately 1.27 mm (50 mils) corresponding to -9 Vdc output.
Q4: Is the 330101-00-96-10-02-CN interchangeable with older Bently Nevada probes?
A4: Yes, it is backward compatible with 3300 non-XL 5 mm and 8 mm systems.
Q5: What is the total system length sur this probe?
A5: 1.0 meter, which does not require an extension cable.
Q6: What is the maximum operating temperature?
A6: +177°C for the standard version; up to +218°C for the ETR version.
Q7: Does the probe require calibration?
A7: Factory-calibrated to AISI 4140 steel; no bench calibration is required if used with matching components.
Q8: What is the frequency response sur the system?
A8: 0 to 10 kHz with ±3 dB deviation.
Q9: What kind sur connector does the probe use?
A9: It uses gold-plated ClickLoc miniature coaxial connectors.
Q10: Can the system detect overspeed?
A10: Yes, it is suitable for tachometer and overspeed applications when properly configured.
Related or Same-Series Modèles
| Modèle Number | Description | Length | Poids |
|---|---|---|---|
| 330101-00-96-10-02-CN | 3300 XL 8 mm Probe, Standard Cable | 1.0 m | 0.323 kg |
| 330102-00-20-10-02-00 | 3300 XL 8 mm Probe with Armor | 2.0 m | 0.45 kg |
| 330103-00-04-10-02-00 | Metric Thread (M10 x 1), No Armor | 1.0 m | 0.32 kg |
| 330105-02-12-10-02-00 | Reverse Mount, UNF Thread | 1.0 m | 0.33 kg |
| 330140-00-10-02-00 | Smooth Case, No Armor | 1.0 m | 0.32 kg |
| 330191-00-20-10-02-00 | ETR Probe, UNF Thread, No Armor | 2.0 m | 0.34 kg |
Popular Bently Nevada Modèles
| Modèle Number | Description | Application | Poids |
|---|---|---|---|
| 330104-00-06-10-02-00 | 8 mm Probe, M10 Thread, with Armor | Vibration monitoring in small shafts | 0.35 kg |
| 330180-50-05 | 3300 XL Proximitor Sensor, 5 m system, Panel | Panel-mounted position monitoring | 0.7 kg |
| 3500/42M-01-00 | Proximitor Seismic Monitor | Vibration and axial displacement | 0.8 kg |
| 3500/22M-01-01-00 | Transient Data Interface Module | Data acquisition and analysis | 0.9 kg |
| 3500/15-05-01-00 | Power Supply Module | Rack-mounted 3500 Series systems | 0.6 kg |
| 3500/94M | VGA Display Interface | System display and diagnostics | 1.0 kg |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.