Présentation du produit
The Bently Nevada 330101-00-30-10-02-05 is part sur the widely deployed 3300 XL 8mm Proximity Probe System, a flagship line in non-contact vibration and position sensing for rotating equipment. This model consists sur a proximity probe designed to deliver consistent and accurate shaft displacement measurements in critical machinery. It is commonly used in conjunction with an extension cable and a Proximitor sensor, forming a complete eddy current proximity measurement system.
This specific part number (00-30-10-02-05) refers to a 30-foot probe assembly with a specific connector and armor configuration that enhances durability in industrial environments. The probe is designed for both OEM installation and retrsuritting in machinery requiring high-performance condition monitoring solutions.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Référence | 330101-00-30-10-02-05 |
| Series | 3300 XL |
| Sensor Type | Non-contact eddy current probe |
| Tip Diameter | 8 mm (0.31 inch) |
| Body Thread | 3/8-24 UNF-2A |
| Case Material | AISI 303 Stainless Steel |
| Total Length | 1.0 meter |
| Connector Type | Miniature coaxial with armor (Option Code 05) |
| Target Material | Calibrated for AISI 4140 steel |
| Linear Range | 2.0 mm (80 mils) |
| Non-Linearity | ≤ ±0.025 mm (±1 mil) |
| Frequency Response | DC to 10 kHz (typical) |
| Operating Temperature | −35°C to +177°C (−31°F to +350°F) |
| Storage Temperature | −51°C to +177°C |
| Insulation Resistance | >10 MΩ at 500 VDC |
| Ingress Protection | IP67 (with properly sealed connector) |
| Poids | 0.323 kg |
| Cable Armor Material | Stainless steel flexible armor |
Product Applications
The Bently Nevada 3300 XL 8mm Proximity Probe is deployed across various industries to monitor the performance and safety sur rotating assets. Common applications include:
-
Turbines (gas and steam)
-
Large electric motors
-
Compressors (centrifugal, axial, reciprocating)
-
Industrial fans and blowers
-
Gearboxes
-
Centrifugal pumps
Industries making use sur this proximity probe include:
-
Power generation (thermal, hydro, nuclear)
-
Oil and gas (surfshore and onshore rigs, refineries)
-
Petrochemical and chemical processing
-
Steel and heavy manufacturing
-
Mining and materials handling
-
Pulp and paper production
Measurement functions include:
-
Radial shaft vibration
-
Axial thrust position
-
Shaft orbit and phase measurement
-
Runout and eccentricity analysis
Product Advantages
-
Exceptional Durability: The armored cable and stainless-steel construction make the probe suitable for extreme industrial environments.
-
Stable and Repeatable Measurements: Calibrated for high precision across the full linear range.
-
Broad Temperature Range: Designed to operate in high-heat zones like turbine enclosures and engine compartments.
-
Seamless System Integration: Fully compatible with Bently Nevada 3300 XL Proximitor sensors and extension cables.
-
Standardized Output: Provides 200 mV/mil output, widely supported across Bently Nevada monitoring platforms.
-
Field-Proven Reliability: Widely deployed in demanding applications worldwide with long operational lifespans.
-
Flexible Mounting: Threaded body and locknut system allow for secure and adjustable installation.
Questions fréquentes (FAQ)
-
What does the part number 330101-00-30-10-02-05 specify?
It indicates a 3300 XL 8mm probe with a 1.0 meter cable, mini coaxial armored connector, and specific configuration options for rugged environments. -
What monitoring devices is this probe compatible with?
It works seamlessly with 3300 XL Proximitor sensors and can be used with Bently Nevada 3500 and 7200 monitoring systems. -
Can it be used for both vibration and position measurements?
Yes, the probe can measure both dynamic shaft vibration and static shaft position (thrust). -
Is the 8mm tip suitable for all shaft sizes?
It is optimized for medium to large shaft diameters. Smaller shafts may benefit from 5mm probes. -
Does the armor protect against EMI or just physical damage?
Primarily physical protection, although the coaxial cable construction helps reduce electromagnetic interference. -
How is the probe installed?
It uses a threaded body and is typically secured with jam nuts. The tip should be properly gapped to the shaft surface. -
What’s the recommended target material?
AISI 4140 steel is the calibration standard for accurate response. -
What is the minimum bend radius for the armored cable?
It is recommended not to exceed a bend radius sur 76 mm (3 inches) to prevent cable damage. -
Can it be used in outdoor applications?
Yes, with proper sealing and installation, the probe’s IP67 rating allows outdoor or wash-down area deployment. -
Does the probe require recalibration?
No routine recalibration is needed under normal conditions, but periodic verification during maintenance is recommended.
Related Modèles (Same Series or Function)
| Modèle Number | Cable Length | Tip Size | Connector Type | Notes |
|---|---|---|---|---|
| 330101-00-05-10-02-05 | 5 ft | 8 mm | Armored mini coaxial | For tight-space or compact machine installations |
| 330101-00-10-10-02-05 | 10 ft | 8 mm | Armored mini coaxial | Mid-range applications |
| 330101-00-15-10-02-05 | 15 ft | 8 mm | Armored mini coaxial | Standard industrial applications |
| 330101-00-20-10-02-05 | 20 ft | 8 mm | Armored mini coaxial | For medium-distance monitoring points |
| 330103-00-10-10-02-05 | 10 ft | 5 mm | Armored mini coaxial | For small shaft diameters or limited clearance |
| 330104-00-10-10-02-05 | 10 ft | 11 mm | Armored mini coaxial | For high-displacement monitoring |
Popular Modèles from Bently Nevada
| Modèle Number | Device Type | Application | Highlights |
|---|---|---|---|
| 3500/22M | Data Interface Module | 3500 System data export | Real-time Ethernet output |
| 3500/42M | Proximitor Monitor | Vibration/position module for 3500 rack | 4-channel proximity inputs |
| 330400 | Velocity Transducer | General-purpose vibration monitoring | Self-generating sensor |
| 330103-00-10-10-02-00 | 5 mm Proximity Probe | Compact rotating machinery | For small radial clearances |
| 330104-00-10-10-02-00 | 11 mm Proximity Probe | High vibration applications | For large shaft displacement |
| 7200 Proximitor Series | Proximitor Sensor | Legacy system compatibility | Still in use with older systems |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
