Présentation du produit
The Bently Nevada 102044-00-28-10-02 Proximity Sensor is a precision-engineered device designed for machinery condition monitoring, specifically for measuring shaft vibration and position in rotating equipment. Developed by Bently Nevada, a globally recognized brand under Baker Hughes, this proximity sensor is part sur their trusted 3300 XL series.
The sensor utilizes eddy current technology to detect the distance between the sensor tip and the conductive target (usually a rotating shaft). It is primarily used in critical machinery protection systems and condition monitoring applications where accurate and real-time displacement measurements are vital.
Spécifications du produit
| Parameter | Value |
|---|---|
| Modèle Number | 102044-00-28-10-02 |
| Series | 3300 XL |
| Sensing Technology | Eddy Current |
| Cable Length | 1 meter |
| Connector Type | Miniature coaxial connector |
| Target Material | Conductive metals (usually steel) |
| Linear Range | 2 mm (±0.25 mm typical linearity within specified range) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) |
| System Compatibility | Compatible with 3300 XL series proximitor modules |
| Operating Temperature | -35°C to +120°C (-31°F to +248°F) |
| Environmental Protection | Hermetically sealed, IP67 rated |
| Poids | 0.689 kg |
Applications
The 102044-00-28-10-02 Proximity Sensor is widely used in industrial and energy sectors. Typical applications include:
-
Steam Turbines
-
Gas Turbines
-
Centrifugal Compressors
-
Motors and Generators
-
Pumps and Fans
-
Gearboxes and Critical Bearings
Product Advantages
-
High Precision & Sensitivity: Accurately measures shaft displacement and vibration, essential for avoiding costly unplanned downtimes.
-
Industry Standard Compliance: Designed to meet API 670 standards for machinery protection.
-
Rugged Design: Built to withstand harsh environments, with sealed stainless steel construction.
-
System Compatibility: Fully compatible with Bently Nevada’s 3300 XL monitoring systems, surfering plug-and-play integration.
-
Long Probe Length: Suitable for installations requiring deep sensor insertion or custom routing.
-
Reliable Output: Maintains consistent output even under temperature fluctuations and electrical noise.
Questions fréquentes (FAQ)
-
What is the primary use sur the Bently Nevada 102044-00-28-10-02 sensor?
It is used for proximity and vibration monitoring sur rotating machinery shafts in critical systems. -
Is this sensor compatible with non-Bently Nevada monitoring systems?
It is optimized for use with Bently Nevada’s 3300 XL systems, but may be adaptable to third-party systems with proper configuration. -
What is the maximum temperature this sensor can handle?
The sensor is rated for operation from -35°C to +120°C. -
Can it be used in explosive environments?
While robust, its use in hazardous areas depends on installation configuration and certification. Refer to product documentation or seek certified alternatives. -
What is the sensing range sur this proximity sensor?
The linear sensing range is approximately 2 mm, with a typical sensitivity sur 200 mV/mil. -
Does it require calibration after installation?
Factory calibration is provided, but site calibration is recommended to ensure accuracy based on mounting and environmental factors. -
Is the cable detachable or integrated?
The cable is typically integral to ensure signal integrity, but models with detachable connectors are available. -
What type sur output signal does it generate?
It outputs a voltage proportional to the shaft’s displacement, typically 7.87 mV/μm. -
How is the sensor installed?
It is mounted using a threaded sleeve or mounting bracket, with precise alignment toward the target shaft surface. -
Can this sensor monitor both vibration and position?
Yes, it can measure both dynamic (vibration) and static (position) parameters when integrated with a proximitor module.
Related Modèles (Same Series or Function)
| Modèle Number | Probe Length | Cable Length | Description |
|---|---|---|---|
| 102044-00-28-10-02 | 28 in | 10 ft | Standard 3300 XL proximity sensor |
| 330101-00-40-10-02 | 40 in | 10 ft | Extended probe length for deep installations |
| 330104-00-16-10-02 | 16 in | 10 ft | Medium-length proximity probe for limited space |
| 330105-02-12-10-02 | 12 in | 10 ft | Short probe, compact systems |
| 330130-040-00-00 | N/A | 4.0 m | 3300 XL NSv proximity cable for narrow spaces |
| 330180-91-00 | N/A | N/A | Extension cable compatible with 3300 XL series |
Popular Bently Nevada Modèles
| Modèle Number | Type | Function |
|---|---|---|
| 330104-00-05-10-02 | Proximity Probe | Standard proximity sensor with 5 in probe |
| 330130-040-00-00 | Extension Cable | Connects probe to proximitor |
| 3300/16-12-01-01-00-00 | Monitoring Module | Vibration monitor, DIN rail mount |
| 3500/22M | Communications Gateway | Interface module for 3500 monitoring systems |
| 3500/42M | Vibration Monitor Module | Four-channel monitor for radial vibration |
| 3500/05 | System Rack | Holds up to 14 modules for 3500 series |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
