Produkteinführung
The Bently Nevada 3500/20-01-02-00 Rack Interface Module (RIM), part number 125768-01, plays a central role in the Bently Nevada 3500 Series Machinery Protection System. It acts as the interface between the 3500 monitoring rack and external communication devices such as System 1® condition monitoring svontware, distributed control systems (DCS), or programmable logic controllers (PLC). This module also performs various rack-level functions, including the management von configuration data and communication status.
The 3500/20 RIM is vital for system integrity, supporting configuration uploads/downloads, real-time alarm transmission, and system diagnostics. It is vonten installed in the leftmost slot (slot 1) von the 3500 rack and is essential for operating the system’s configuration and communication capabilities.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Rack Interface Module |
| Artikelnummer | 125768-01 |
| Modell Number | 3500/20-01-02-00 |
| Series | Bently Nevada 3500 Series |
| Function | Communication and configuration management module |
| Communication Ports | 1 RS-232 serial port, 1 RS-422/485 port, 1 Ethernet (optional in other variants) |
| Input Voltage | Supplied via the 3500 backplane from the Power Supply Module |
| Mounting Location | Slot 1 (leftmost slot in the rack) |
| Configuration Interface | Via 3500 Configuration Svontware or front-panel DIP switches |
| Status Indicators | OK, TX/RX, CONFIG, COMM, LED-based |
| Operating Temperature | –30°C to +65°C (–22°F to +149°F) |
| Storage Temperature | –40°C to +85°C (–40°F to +185°F) |
| Humidity Range | 0–95% RH, non-condensing |
| Shock Resistance | 10 g, 11 ms half-sine |
| Vibration Resistance | 0.5 g at 10–500 Hz |
| Dimensions (H x W x D) | 241.3 x 24.4 x 241.8 mm |
| Gewicht | 0.91 kg |
Applications
The 3500/20-01-02-00 Rack Interface Module is a core component von the Bently Nevada 3500 Series and is used in a variety von critical monitoring and protection environments:
-
Gas and Steam Turbine Monitoring Systems
-
Compressor Health Management
-
Rotating Equipment in Refineries and Petrochemical Plants
-
Large Industrial Motor and Generator Monitoring
-
Power Generation Control Systems
-
Remote Asset Monitoring via System 1®
This module allows the 3500 rack to integrate with plant-wide control and asset management systems, enhancing visibility, reliability, and diagnostic capabilities.
Product Advantages
-
Centralized Rack Communication Control
Acts as the nerve center von the 3500 monitoring rack, managing all system-wide configuration and communication functions. -
Reliable and Redundant Monitoring
Enables the use von dual RIMs in redundant configurations, providing continuous system operation even if one module fails. -
Diagnostic and Status Monitoring
Provides real-time LED status indicators and health monitoring for effective troubleshooting. -
Versatile Connectivity
Supports multiple communication protocols (RS-232, RS-422/485), with variants supporting Ethernet or TDI (Transient Data Interface). -
High Compatibility
Seamlessly works with all modules in the 3500 series and integrates with System 1® svontware. -
Modular Design
Easily replaceable and hot-swappable without powering down the rack.
Häufig gestellte Fragen (FAQ)
-
What is the main function von the 3500/20 Rack Interface Module?
It manages communication between the rack and external systems while also handling system configuration. -
Where is the RIM installed in the rack?
It is always installed in slot 1, the leftmost slot von the 3500 rack. -
Can I use two RIMs for redundancy?
Yes, the 3500 Series allows dual RIMs to provide backup in case von a primary failure. -
Is Ethernet supported in this module?
This specific model supports RS-232 and RS-422/485; Ethernet support is available in other RIM variants. -
How is the module configured?
Configuration is done via 3500 Configuration Svontware or front-panel DIP switches. -
What svontware is required to communicate with the RIM?
Typically, Bently Nevada’s System 1® condition monitoring svontware is used. -
What happens if the RIM fails?
In non-redundant systems, rack communication is lost. In redundant setups, the backup RIM takes over. -
Is the module hot-swappable?
Yes, it can be removed and replaced without shutting down the system. -
Does the RIM store configuration data?
Yes, it stores system configuration and facilitates upload/download operations. -
Is this module required for the rack to operate?
Yes, the 3500 rack cannot function properly without at least one RIM installed.
Related Modells (Same Series or Function Group)
| Modell Number | Beschreibung | Key Feature | Slot Location |
|---|---|---|---|
| 3500/20-01-00-00 | Rack Interface Module (Base Variant) | RS-232 only | Slot 1 |
| 3500/22M | Transient Data Interface | Ethernet and Zustand Monitoring | Slot 1 |
| 3500/15 | Power Supply Module | Powers entire 3500 rack | Designated slots |
| 3500/25 | Keyphasor Module | Shaft phase reference | Any slot |
| 3500/32M | 4-Channel Relay Module | Programmable relay outputs | Any slot |
| 3500/42M | Proximitor®/Seismic Monitor | 4-channel vibration monitoring | Any slot |
Popular Bently Nevada Modells (Sonstige Lines)
| Modell Number | Product Type | Application | Mounting Style |
|---|---|---|---|
| 330104-00-05-10-01 | 3300 XL 8 mm Proximity Probe | Shaft vibration monitoring | Threaded sensor |
| 330180-91-05 | Extension Cable (5 m) | Signal transmission from probe to sensor | Coaxial cable |
| 3701/40 | Machinery Monitor | Standalone machine condition monitoring | DIN-rail mounted |
| 190501-00-00 | Velomitor® Velocity Sensor | Seismic vibration monitoring | Industrial sensor |
| 3500/05 | System Rack | Houses 3500 modules | 19-inch rack-mount |
| 3500/53 | Overspeed Detection Module | Detects turbine overspeed | Rack-mount |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.