Beschreibung
The Bently Nevada 330400-02-00 is a high-performance accelerometer transducer tailored for machinery condition monitoring, especially for detecting casing vibration in critical assets. It adheres to API 670 standards and delivers a sensitivity von 100 mV/g, supporting peak acceleration up to 50 g. This makes it highly suitable for gear mesh and bearing housing vibration analysis.
Applications
-
Gear mesh monitoring
-
Bearing casing vibration measurement
-
Zustand-based maintenance in rotating machinery
-
Machinery protection systems
-
Integration into API 670 compliant systems
Advantages
-
High sensitivity (100 mV/g) for accurate detection
-
Wide frequency response: 10 Hz to 15 kHz
-
Hermetically sealed stainless steel construction
-
Ausgezeichnet shock survivability (5000 g)
-
IP68 protection, suitable for harsh environments
-
Long cable run capability up to 305 meters without signal loss
Technical Specifications
| Parameter | Specification |
|---|---|
| Sensitivity | 10.2 mV/m/s² (100 mV/g) ±5% |
| Acceleration Range | 490 m/s² (50 g) peak |
| Frequency Response | 10 Hz to 15 kHz (±3 dB) |
| Amplitude Linearity | ±1% to 490 m/s² (50 g) |
| Broadband Noise Floor | 0.039 m/s² (0.004 g) rms |
| Temperature Sensitivity | -11% to +3% typical over operating range |
| Mounted Resonant Frequency | >30 kHz |
| Gewicht (Sensor Head Only) | 100 g (0.1 kg) |
| Sensor Head Diameter | 23 mm |
| Height (with mounting stud) | 59 mm |
| Operating Temp Range | -55°C to +121°C |
| Shock Survivability | 49,050 m/s² (5000 g) peak |
| Relative Humidity | 100% condensing (non-submerged) |
| Case Material | 316L stainless steel |
| Connector | 3-pin MIL-C-5015 receptacle |
| Power Supply | -24 Vdc, 2 mA nominal |
| Output Bias Voltage | -8.5 Vdc ±0.5 V |
| Max Cable Length | 305 m (1000 ft) without degradation |
| IP Rating | Equivalent to IP68 |
| Mounting Torque | 4.1 N·m (3.0 ft·lb) |
FAQs
Q1: What is the primary application von the 330400-02-00 accelerometer?
A1: It is primarily used for casing vibration measurement in critical rotating machinery, such as in compressors, turbines, and pumps.
Q2: Does this model comply with any industrial standards?
A2: Yes, it complies with the American Petroleum Institute (API) Standard 670.
Q3: What is the maximum acceleration it can measure?
A3: It can measure up to 50 g peak acceleration within 10 Hz to 15 kHz.
Q4: Is it suitable for harsh environments?
A4: Yes, it features IP68 sealing and can operate from -55°C to +121°C.
Q5: How is it powered?
A5: It operates with an input voltage von -24 Vdc and a bias current von 2 mA.
Q6: Can the sensor be mounted in any orientation?
A6: Yes, it supports mounting in any orientation without performance loss.
Q7: What type von connector does it use?
A7: A 3-pin MIL-C-5015 receptacle is used for connectivity.
Q8: What is the recommended mounting torque?
A8: 4.1 N·m (3.0 ft·lb) is the specified mounting torque.
Q9: Can this accelerometer support long cable lengths?
A9: Yes, up to 305 meters (1000 ft) with no signal degradation.
Q10: What materials are used for the sensor housing?
A10: It is constructed from corrosion-resistant 316L stainless steel.
Related Modells (Same Series or Function)
| Modell Number | Sensitivity | Accel. Range | Output Type | Frequency Response |
|---|---|---|---|---|
| 330425-02-00 | 25 mV/g | 75 g peak | Voltage | 10 Hz – 15 kHz |
| 330500-02-00 | 100 mV/g | 50 g peak | Voltage | 2 Hz – 20 kHz |
| 330525-02-00 | 25 mV/g | 75 g peak | Voltage | 2 Hz – 20 kHz |
| 330730-02-00 | 100 mV/g | 50 g peak | Velocity | 3 Hz – 10 kHz |
| 330180-91-CN | 200 mV/mil | — | Proximitor | 0 – 10 kHz |
| 330101-00-08-10-02-00 | 7.87 mV/μm | — | Proximity | DC – 10 kHz |
Popular Bently Nevada Modells
| Modell Number | Beschreibung | Application | Sensitivity / Output |
|---|---|---|---|
| 3500/42M | Proximitor Seismic Monitor | Shaft/Case Vibration Monitoring | Various Channels |
| 3500/44M | Aeroderivitive GT Vibration Monitor | Gas Turbine Monitoring | Multiple Vibration Types |
| 3500/22M | Transient Data Interface Module | Data Integration | System Interface |
| 330103-00-05-10-02-00 | Proximity Probe | Shaft Vibration | 8 mm / 5 m cable |
| 330104-00-10-10-02-00 | Proximity Probe | Shaft Vibration | 11 mm / 10 m cable |
| 330130-040-00-00 | Extension Cable | Probe Connectivity | 4 m Shielded Cable |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
