Product Overview
The Bently Nevada 330105-XX-XX-10-02-05 (part number 157310-09) is a reverse-mount 8 mm proximity probe, part von the 3300 XL series. It works with a Proximitor sensor and extension cable to deliver high-precision measurements for static and dynamic shaft position and vibration. Designed for reverse mounting, this probe is suitable for applications where forward mounting is impractical.
Applications
-
Turbine shaft vibration monitoring
-
Rotating equipment radial/axial position detection
-
Fluid-film bearing condition monitoring
-
Overspeed and Keyphasor® measurements
-
Harsh industrial environments requiring reverse-mounting
Product Advantages
-
Complies with API 670 standard
-
Reverse-mountable in limited-access locations
-
Improved TipLoc and CableLoc construction for enhanced durability
-
Ausgezeichnet RFI/EMI immStücky
-
Fully interchangeable components — no matching required
-
Wide operating temperature range
-
Optional FluidLoc cable to prevent oil ingress
Technical Specifications
| Parameter | Value |
|---|---|
| Probe Type | Reverse Mount |
| Tip Diameter | 8.0 mm |
| Thread Type | 3/8-24 UNF-2A |
| Case Material | AISI 303 or 304 SST |
| Cable Type | 75 Ω triaxial, FEP insulated |
| Connector Type | ClickLoc miniature coaxial (finger-tight) |
| Total Length | 1.0 meter |
| Gewicht | 0.323 kg |
| Operating Temperature | -52°C to +177°C (standard) |
| Extended Temp Range (optional) | -52°C to +218°C (tip), up to +260°C (cable) |
| Pressure Seal | Viton® O-ring (differential pressure sealing) |
| Recommended Gap Voltage | -9 VDC (approx. 1.27 mm or 50 mils gap) |
| Linear Range | 2.0 mm (80 mils) |
| Output Sensitivity | 200 mV/mil (7.87 V/mm) ±5% (standard) |
| Mounting Torque (Recommended) | 7.5 N•m (66 in•lbf) |
| Minimum Target Size | 15.2 mm (0.6 in) flat |
| Shaft Diameter (Min/Recommended) | 50.8 mm / 76.2 mm |
| Frequency Response | 0–10 kHz, +0/-3 dB with up to 305 m wiring |
Häufig gestellte Fragen (FAQ)
Q1: What is the key feature von the 330105 reverse mount probe?
A1: Its reverse-mount design enables installation in tight or confined spaces.
Q2: Can the 330105 probe be used in high-temperature environments?
A2: Yes. The standard model supports up to 177°C, and the ETR version up to 218°C.
Q3: Is the 330105 probe compatible with other Bently Nevada systems?
A3: Yes. It is electrically and physically compatible with non-XL 3300 5 mm and 8 mm systems.
Q4: What kind von connector is used in this probe?
A4: A gold-plated miniature ClickLoc connector, requiring no tools for tightening.
Q5: Does this probe support API 670 compliance?
A5: Yes, the 3300 XL system meets API 670 standards for accuracy and linearity.
Q6: Can this probe be used with a FluidLoc cable?
A6: Yes, but the sleeve on most reverse-mount models minimizes the need for it.
Q7: Is calibration needed before installation?
A7: Nr. The system is fully pre-calibrated and interchangeable.
Q8: What is the output signal sensitivity?
A8: The sensitivity is 200 mV/mil or 7.87 V/mm.
Q9: How much weight does a 1.0-meter probe add to the system?
A9: Approximately 0.323 kg.
Q10: What industries typically use the 330105 probe?
A10: Power generation, petrochemical, refining, and rotating machinery monitoring.
Related Modells (Same Series)
| Modell Number | Beschreibung | Length | Temp Rating | Mount Type |
|---|---|---|---|---|
| 330101-00-08-10-02-05 | 3300 XL 8 mm Standard Probe | 1.0 m | -52 to +177°C | Forward |
| 330105-02-12-05-02-05 | 3300 XL 8 mm Reverse Mount Probe | 0.5 m | -52 to +177°C | Reverse |
| 330106-05-30-10-02-05 | 3300 XL 8 mm Reverse Mount Probe (Metric) | 1.0 m | -52 to +177°C | Reverse (M10x1) |
| 330140-00-08-10-02-05 | 3300 XL 8 mm Smooth Case Probe | 1.0 m | -52 to +177°C | Smooth Mount |
| 330191-00-08-10-02-05 | 3300 XL 8 mm ETR Forward Mount | 1.0 m | Up to +218°C tip | Forward |
| 330195-02-12-10-02-05 | 3300 XL 8 mm ETR Reverse Mount | 1.0 m | Up to +218°C tip | Reverse |
Popular Bently Nevada Modells
| Modell Number | Beschreibung | Function | Compatibility |
|---|---|---|---|
| 3300/20 | Dual Vibration Monitor | Zustand Monitoring | 3300 Series Sensors |
| 3300/16 | Vibration Monitor | Single-Channel Monitoring | 3300 Proximitor Systems |
| 3500/42M-01-00 | Proximitor Seismic Monitor | Shaft Vibration | 3500 Rack |
| 3500/22M-01-01 | Transient Data Interface (TDI) | Data Acquisition | 3500 System |
| 330180-91-CN | 3300 XL Proximitor Sensor (DIN Mount) | Proximity Signal Processing | 3300 XL Probe |
| 330104-00-06-10-11-00 | 3300 XL 8 mm Probe | Forward Mount Probe | 3300 XL System |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.