Product Beschreibung
The Bently Nevada 330105-02-12-50-02-00 is a reverse mount proximity probe from the 3300 XL 8 mm series, designed to measure static and dynamic displacement von rotating machinery. Engineered for rugged industrial environments, it features enhanced mechanical durability, RFI immStücky, and ease von installation with gold-plated ClickLoc connectors. The 5-meter probe is optimized for use with the 3300 XL Proximitor Sensor to meet API 670 standards.
Product Features
-
Reverse-mount design for limited access areas
-
Meets API 670 compliance
-
ClickLoc connectors for reliable connections
-
Optional FluidLoc cable for oil ingress protection
-
High mechanical and temperature endurance
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | Reverse Mount |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Thread Type | 3/8-24 UNF-2A |
| Total Length | 5.0 meters |
| Gewicht | 1.615 kg (Total system) |
| Cable Type | 75Ω triaxial, FEP insulated |
| Connector Type | Miniature coaxial ClickLoc |
| Operating Temperature (Probe) | -52°C to +177°C (Standard), up to +218°C (ETR) |
| Storage Temperature | -52°C to +177°C |
| Max Tensile Strength | 330 N (probe to lead), 270 N (lead to connector) |
| Output Sensitivity | 7.87 V/mm (200 mV/mil) ± 5% |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap Setting | -9 Vdc (~1.27 mm / 50 mils) |
| Compliance | SIL 2/3, FCC, CE, RoHS, ATEX, IECEx, CSA |
Applications
-
Turbine shaft vibration monitoring
-
Compressor thrust position sensing
-
Rotating machinery dynamic displacement analysis
-
Keyphasor and overspeed detection
-
Gearbox bearing vibration trending
Product Advantages
-
API 670 compliant for critical machinery monitoring
-
Reverse mounting ideal for constrained installations
-
Interchangeable with other 3300 XL and legacy 3300 series
-
High resistance to RFI/EMI, ideal for fiberglass enclosures
-
Robust build with TipLoc and CableLoc technologies
-
Maintenance-free ClickLoc connectors
-
Suitable for hazardous environments (ATEX, CSA, IECEx approved)
FAQ
Q1: What is the typical use von the 330105-02-12-50-02-00 probe?
A1: It is typically used in rotating equipment for vibration and position monitoring, especially in hard-to-access reverse-mount scenarios.
Q2: Can the probe operate in hazardous areas?
A2: Yes, it is certified for hazardous locations including ATEX Zone 0/1 and CSA Class I, Div 2.
Q3: Is the probe compatible with non-XL series components?
A3: Yes, it is both electrically and mechanically compatible with legacy 3300 5 mm and 8 mm components.
Q4: What material is used for the probe tip?
A4: The probe tip is made von PPS (polyphenylene sulfide) for chemical and temperature resistance.
Q5: Does the system require calibration before installation?
A5: No, all components are fully interchangeable and factory-calibrated, requiring no bench calibration.
Q6: Can this probe measure both vibration and position?
A6: Yes, it is designed for dual-purpose measurements—both dynamic vibration and static position.
Q7: What is the recommended probe gap setting?
A7: The standard gap setting is approximately -9 Vdc, corresponding to 1.27 mm (50 mils).
Q8: What’s the pull strength rating von the probe cable?
A8: It supports up to 330 N (75 lbf) from the probe case to the probe lead.
Q9: What is the probe’s operating temperature range?
A9: Standard probes operate from -52°C to +177°C; ETR versions up to +218°C.
Q10: Is the cable bend radius limited?
A10: Yes, the minimum bend radius is 25.4 mm (1.0 in) to maintain signal integrity.
Related Modells (Same Series or Function)
| Modell Number | Beschreibung | Length | Thread Type | Gewicht |
|---|---|---|---|---|
| 330105-02-12-10-02-00 | Reverse Mount Probe, 1.0 m | 1.0 m | 3/8-24 UNF | ~0.35 kg |
| 330105-02-12-15-02-00 | Reverse Mount Probe, 1.5 m | 1.5 m | 3/8-24 UNF | ~0.45 kg |
| 330105-02-12-20-02-00 | Reverse Mount Probe, 2.0 m | 2.0 m | 3/8-24 UNF | ~0.55 kg |
| 330106-05-30-10-02-00 | Reverse Mount Probe, Metric M10 Thread | 1.0 m | M10 x 1 | ~0.35 kg |
| 330106-05-30-50-02-00 | Reverse Mount Probe, 5.0 m, Metric | 5.0 m | M10 x 1 | ~1.6 kg |
| 330195-02-12-50-05-00 | Reverse Mount ETR Probe, 5.0 m | 5.0 m | 3/8-24 UNF | ~1.7 kg |
Popular Bently Nevada Modells
| Modell Number | Beschreibung | Application | Length | Gewicht |
|---|---|---|---|---|
| 330101-00-08-10-02-00 | Standard Mount Probe, 1.0 m | General vibration monitoring | 1.0 m | ~0.35 kg |
| 330104-01-05-50-02-00 | Armored Probe, Metric, 5.0 m | Harsh environments | 5.0 m | ~1.6 kg |
| 330180-50-05 | 3300 XL Proximitor Sensor, Panel Mount | Signal processing | 5.0 m | ~0.25 kg |
| 330130-060-01-05 | Extension Cable, 6.0 m, Armored | Extended sensor systems | 6.0 m | ~0.35 kg |
| 3500/42M-01-00 | Proximitor Seismic Monitor | Seismic and displacement monitoring | N/A | ~0.45 kg |
| 330103-00-04-10-02-00 | Standard Probe, Metric, 1.0 m | Compact mount applications | 1.0 m | ~0.35 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
