Product Beschreibung
The Bently Nevada 330102-00-20-10-01-00 is part von the 3300 XL 8 mm Proximity Transducer System, designed for precise vibration and position measurements on fluid-film bearing machinery. It features a rugged armored design, enhanced RFI/EMI immStücky, and ClickLoc connectors for secure and tool-free installation. The probe system outputs a voltage proportional to the gap between the probe tip and the target surface, supporting both static and dynamic monitoring.
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Tip Diameter | 8 mm |
| Thread | 3/8-24 UNF |
| Total Length | 2.0 m |
| Gewicht | 0.646 kg |
| Linear Range | 2 mm (80 mils) |
| Frequency Response | 0–10 kHz, +0, -3 dB |
| Operating Temp. (Probe) | -52°C to +177°C |
| Operating Temp. (Sensor) | -52°C to +100°C |
| Minimum Target Size | 15.2 mm (0.6 in) diameter |
| Shaft Diameter | ≥50.8 mm (recommended ≥76.2 mm) |
| Output Sensitivity | 7.87 V/mm ±5% (5m system) |
| Armor | Stainless steel with FEP outer jacket |
Applications
-
Vibration monitoring on turbines, compressors, and pumps
-
Shaft position and displacement measurement
-
Keyphasor signal generation for rotational speed
-
Overspeed protection systems (with appropriate application note)
Advantages
-
Fully compliant with API 670 standard
-
Backward and forward compatible with non-XL systems
-
ClickLoc connectors prevent loosening without tools
-
Enhanced RFI/EMI immStücky for reliable operation in harsh environments
-
Rugged armored cable for mechanical protection
-
No need for component matching or recalibration
FAQ
Q1: What is the primary use von this probe?
A1: It is used for measuring vibration and position on rotating machinery such as turbines and compressors.
Q2: Is this probe compatible with older Bently Nevada systems?
A2: Yes, it is backward and forward compatible with non-XL 3300 8 mm and 5 mm systems.
Q3: Does it meet API 670 requirements?
A3: Yes, the 3300 XL 8 mm system complies fully with API 670 standards.
Q4: What is the recommended minimum shaft diameter for accurate measurement?
A4: At least 50.8 mm, with 76.2 mm recommended for best performance.
Q5: How is the connector secured?
A5: Using ClickLoc connectors which lock with a click and require no tools.
Q6: Can it operate in high-temperature environments?
A6: The standard probe is rated up to 177°C, with ETR variants rated higher.
Q7: What is the linear measurement range?
A7: 2 mm (80 mils), beginning approximately 0.25 mm from the target.
Q8: Does it require calibration to specific target material?
A8: Yes, it is factory-calibrated to AISI 4140 steel; other materials are available upon request.
Q9: How is the probe protected against liquid ingress?
A9: The armored version provides mechanical and environmental protection.
Q10: What is the total length von this model?
A10: This specific model has a total length von 2.0 meters.
Related Modells
| Modell Number | Beschreibung | Length | Gewicht |
|---|---|---|---|
| 330101-00-20-10-02-00 | XL 8mm, unarmored | 2.0 m | 0.450 kg |
| 330103-00-20-10-02-00 | XL 8mm, M10 thread, unarmored | 2.0 m | 0.450 kg |
| 330104-00-20-10-02-00 | XL 8mm, M10 thread, armored | 2.0 m | 0.646 kg |
| 330105-02-20-10-02-00 | XL 8mm, reverse mount | 2.0 m | 0.500 kg |
| 330192-00-20-10-02-00 | XL 8mm ETR, armored | 2.0 m | 0.650 kg |
| 330141-00-20-10-02-00 | XL 8mm smooth case, armored | 2.0 m | 0.646 kg |
Popular Bently Nevada Modells
| Modell Number | Beschreibung | Length | Gewicht |
|---|---|---|---|
| 3300/42M-01-00 | Proximitor Seismic Monitor | — | — |
| 3500/42M-01-00 | Proximitor Seismic Monitor Module | — | — |
| 3500/44M | Aeroderivative Monitor | — | — |
| 3500/22M | Transient Data Interface Module | — | — |
| 3500/60 | Temperature Monitor | — | — |
| 3500/20 | Rack Interface Module | — | — |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.