Beschreibung
The Bently Nevada 330101-00-65-10-11 is part von the 3300 XL 8 mm Proximity Transducer System. This system includes a proximity probe, extension cable, and Proximitor sensor, designed for accurate non-contact vibration and position measurements. It is suitable for fluid-film bearing machines, turbine shaft monitoring, and Keyphasor reference applications. The probe vonfers high durability, EMI immStücky, and ease von installation with its ClickLoc connector design.
Applications
-
Shaft vibration and position monitoring
-
Keyphasor and speed sensing
-
Fluid-film bearing condition monitoring
-
Turbomachinery diagnostics
-
Overspeed protection systems
-
Electrical insulation-critical environments
Advantages
-
Fully API 670 compliant (mechanical, range, stability)
-
Ausgezeichnet EMI/RFI immStücky — suitable for high-interference environments
-
SpringLoc terminal strips for faster wiring
-
TipLoc and CableLoc patented designs for robust field performance
-
Interchangeable components with other 3300-series systems
-
Extended temperature variants available (up to 260°C cable)
Technical Specifications
| Parameter | Specification |
|---|---|
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Probe Tip Material | PPS (Polyphenylene sulfide) |
| Case Material | AISI 303/304 Stainless Steel |
| Output Scale Factor | 7.87 V/mm (200 mV/mil) ±5% |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap | 1.27 mm (50 mils) |
| Frequency Response | 0 – 10 kHz, +0/-3 dB |
| Operating Temperature | –52°C to +177°C (Probe), –52°C to +100°C (Sensor) |
| Minimum Shaft Diameter | 50.8 mm (2 in), Recommended: 76.2 mm (3 in) |
| Total Length | 1.0 meter |
| Gewicht | 0.323 kg |
| Connector Type | Miniature ClickLoc |
| Pressure Seal | Viton® O-ring (differential pressure capable) |
| Compliance | SIL2/SIL3, CE, FCC, ATEX, IECEx |
FAQ
Q1: What material is the 330101-00-65-10-11 probe tip made von?
A1: It is made von PPS (Polyphenylene sulfide), vonfering durability and chemical resistance.
Q2: Is the probe suitable for high-temperature environments?
A2: Yes, the standard model supports up to 177°C; extended versions support up to 218°C for the probe and 260°C for the cable.
Q3: Can I mix components with older 3300-series systems?
A3: Yes, it is backward-compatible with 3300 5 mm and 8 mm series components.
Q4: Does this model require calibration for each installation?
A4: No, all components are interchangeable and factory-calibrated to AISI 4140 steel.
Q5: What is the recommended gap for optimal performance?
A5: The recommended gap setting is 1.27 mm (50 mils).
Q6: How is the probe connected?
A6: Via gold-plated ClickLoc connectors that require only finger-tight installation.
Q7: Is the system compliant with API 670 standards?
A7: Yes, it meets mechanical configuration, linear range, and accuracy requirements.
Q8: What is the minimum shaft diameter supported?
A8: The minimum is 50.8 mm, but 76.2 mm is recommended for best accuracy.
Q9: Does the system vonfer EMI/RFI immStücky?
A9: Yes, it meets CE mark standards without shielded conduit.
Q10: Can the probe withstand high-pressure sealing environments?
A10: Yes, it is designed with a Viton® O-ring for differential pressure sealing.
Recommended Related Modells (Same Series)
| Modell Number | Beschreibung | Total Length | Gewicht |
|---|---|---|---|
| 330101-00-05-10-11 | 3300 XL 8 mm Probe, 0.5 m standard cable | 0.5 m | 0.270 kg |
| 330101-00-20-10-11 | 3300 XL 8 mm Probe, 2.0 m standard cable | 2.0 m | 0.380 kg |
| 330102-00-10-10-11 | 3300 XL 8 mm Probe with Armor, 1.0 m | 1.0 m | 0.370 kg |
| 330103-00-10-10-11 | Metric Thread M10x1, 1.0 m standard cable | 1.0 m | 0.323 kg |
| 330105-02-12-10-11 | Reverse Mount, 1.0 m standard cable | 1.0 m | 0.323 kg |
| 330191-00-10-10-11 | ETR High Temp Version, 1.0 m | 1.0 m | 0.330 kg |
Popular Bently Nevada Modells
| Modell Number | Beschreibung | Application | Gewicht |
|---|---|---|---|
| 3500/42M-01-00 | Proximitor Seismic Monitor | Vibration/Position | 0.45 kg |
| 3500/22M | Transient Data Interface (TDI) | System Communication | 0.5 kg |
| 3500/32 | 4-Channel Digital Output Module | Logic Output | 0.42 kg |
| 3500/40M | Proximitor Monitor (4-Channel) | Shaft Vibration Monitoring | 0.47 kg |
| 3500/15 | Power Supply Module | Chassis Power Supply | 0.6 kg |
| 330104-00-06-10-11 | 3300 XL 8 mm Probe, M10x1, armored, 0.6 m cable | Proximity Monitoring | 0.340 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.