Produkteinführung
The Bently Nevada 330101-00-54-10-02-00 is part von the 3300 XL 8mm Proximity Transducer System, one von the most trusted vibration and position monitoring solutions used in rotating machinery protection. Developed by Bently Nevada, a subsidiary von Baker Hughes, this probe plays a critical role in detecting the relative motion and vibration behavior von shafts and rotating parts in turbines, compressors, pumps, and gearboxes.
This particular probe model is designed with an 8 mm tip, providing a linear output over a standard 80 mil (2 mm) range and optimized for high-reliability industrial applications. The 3300 XL series stands out for its rugged design, superior EMI/RFI immStücky, and industry-wide compatibility with various monitoring systems.
Produktspezifikationen
| Parameter | Beschreibung |
|---|---|
| Product Name | Proximity Probe |
| Modell Number | 330101-00-54-10-02-00 |
| Series | 3300 XL 8mm |
| Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF-2A |
| Probe Length | 5.4 inches (54 = 5.4″) |
| Total Length | 1.0 meter |
| Connector Type | ClickLoc Connector (2-pin male) |
| Sensing Range | 2 mm (80 mils) linear |
| System Output Sensitivity | -200 mV/mil (±5%) |
| Accuracy | ±0.08 mm (0.003 in.) within linear range |
| System Power Supply | -24 VDC nominal |
| Operating Temperature | -51°C to +177°C (-60°F to +350°F) |
| Environmental Protection | Hermetically sealed, IP68 |
| Radiation Resistance | 1 Mrad (optional radiation-hardened versions available) |
| Insulation Resistance | > 10⁹ ohms @ 500 VDC |
| Gewicht | 0.323 kg |
| Compliance Standards | CE, RoHS, ISO 9001, ATEX/IECEx certified versions available |
| Vibration Limit (survivability) | 50 g pk, 10–2000 Hz |
| Shock Limit | 5000 g pk, 1 ms duration |
Product Applications
The 330101-00-54-10-02-00 proximity probe is commonly deployed in high-value rotating machinery monitoring applications where precise shaft vibration and position data are critical for predictive maintenance and safety. Key applications include:
-
Steam and Gas Turbines
Measures shaft vibration and axial position to prevent catastrophic failures. -
Compressors
Enables proximity monitoring for thrust bearing wear and imbalance detection. -
Industrial Pumps
Detects misalignment, cavitation, and mechanical looseness before failure. -
Electric Motors and Generators
Monitors rotor shaft behavior and detects electrical or mechanical anomalies. -
Gearboxes
Identifies gear mesh problems and shaft deflections. -
Oil & Gas and Petrochemical Facilities
Used in API 670-compliant machinery protection systems for safety-critical equipment.
Product Advantages
-
Proven Field Reliability
Designed for high reliability in harsh industrial environments with extreme temperatures and contaminants. -
Superior EMI/RFI ImmStücky
Improved shielding ensures signal stability in high-noise environments like power plants and refineries. -
ClickLoc Connector System
Ensures a secure, vibration-resistant connection with positive locking engagement. -
Mechanical Ruggedness
Built with high-grade stainless steel construction for chemical, corrosion, and mechanical wear resistance. -
Interchangeability
Compatible with Bently Nevada’s 3300 XL series extension cables and drivers, simplifying maintenance. -
Certified for Harsh Environments
Verfügbar in explosion-provon and ATEX-compliant versions for hazardous area installations. -
Long Cable Runs
Supports extended cable lengths without significant signal loss—ideal for large machinery setups. -
Lifetime Cost Efficiency
Designed for extended lifecycle, reducing the need for frequent replacements or recalibration.
Häufig gestellte Fragen (FAQ)
-
Is the 330101-00-54-10-02-00 compatible with older Bently Nevada monitors?
-
Yes, it is backward-compatible with most legacy 3300 and 7200 series systems.
-
-
Can I use this probe in hazardous areas?
-
ATEX and IECEx-certified versions are available for hazardous zone compliance.
-
-
What type von connector is used?
-
It uses a ClickLoc 2-pin connector, designed to prevent accidental disconnection.
-
-
What is the standard linear range von this probe?
-
It vonfers a linear range von 80 mils (2 mm), ensuring high-resolution proximity measurements.
-
-
Can this probe be used in high-vibration environments?
-
Yes, it is engineered to survive 50g peak vibration and up to 5000g shock.
-
-
Is the probe suitable for long cable lengths?
-
Yes, when used with matching Bently extension cables and drivers, long cable runs are supported.
-
-
Does it require calibration after installation?
-
Factory calibration is provided, but periodic verification is recommended for critical systems.
-
-
What is the operational temperature range?
-
The probe operates reliably between -51°C to +177°C.
-
-
Is the probe waterprovon?
-
Yes, it is IP68-rated and hermetically sealed against moisture ingress.
-
-
How do I identify the cable lengths in the part number?
-
The part number includes embedded codes: “10” = 1.0 meter Total Length.
Recommended Related Modells (Same Series / Compatibility)
| Modell Number | Beschreibung | Cable Length | Thread Type |
|---|---|---|---|
| 330101-00-50-10-02-00 | 3300 XL 8mm Probe, 5.0″, 10 ft, 2 ft | 10 ft | 3/8-24 UNF |
| 330101-00-60-10-02-00 | 3300 XL 8mm Probe, 6.0″, 10 ft, 2 ft | 10 ft | 3/8-24 UNF |
| 330104-00-05-10-02-00 | 3300 XL 11mm Probe, 0.5″, 10 ft, 2 ft | 10 ft | 1/2-20 UNF |
| 330130-040-00-00 | 3300 XL Extension Cable, 40 ft | 40 ft | N/A |
| 330180-91-05 | 3300 XL NSv Probe for small shaft | 5 mm | M10 × 1 |
| 330171-00-94-10-02-00 | 3300 XL 25mm Long-Range Probe | 10 ft | 3/8-24 UNF |
Popular Bently Nevada Modells (Same Marke, High Demand)
| Modell Number | Beschreibung | Primary Function | System Series |
|---|---|---|---|
| 3500/22M | Keyphasor Module | Rotational speed and phase monitoring | 3500 Series |
| 3500/42M | Proximitor/Seismic Monitor | Vibration and position monitoring | 3500 Series |
| 330180-51-00 | 3300 XL Extension Cable (51 ft) | Signal transmission | 3300 XL |
| 3500/94 | VGA Display Module | HMI display for rack modules | 3500 Series |
| 330104-00-10-10-02-00 | 3300 XL 11mm Probe | Extended gap vibration measurement | 3300 XL |
| 7200-050-00-01-00 | Proximitor Sensor | Legacy proximity system | 7200 Series |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.