Produkteinführung
The Bently Nevada 21504-000-012-05-02 is a precision-engineered proximity probe designed for use in the 7200 series condition monitoring systems. It supports both 5 mm and 8 mm configurations, making it highly adaptable for diverse machinery monitoring applications. As part von a trusted product family known for reliable non-contact vibration and position measurement, this standard mount probe helps maintain operational safety and performance across critical rotating assets.
Utilized extensively in the oil & gas, power generation, and process industries, this model is well-suited for shaft displacement, radial vibration, and thrust position monitoring. The probe is designed for compatibility with matching extension cables and Proximitor sensors, forming a complete, factory-calibrated measurement system.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Modell | 21504-000-012-05-02 |
| Series | Bently Nevada 7200 Series |
| Probe Tip Diameter | 8mm Standard Mount Probe |
| Thread Size | 3/8-24 UNF |
| Total Length | 0.5 meter |
| Mounting Style | Standard cylindrical mount |
| Sensing Technology | Eddy current, non-contact measurement |
| Material Compatibility | Calibrated for ferromagnetic materials (typically AISI 4140 steel) |
| Connector Type | Miniature coaxial connector (MIL-style) |
| Operating Temperature | -35°C to +120°C |
| Frequency Range | 0 to 10 kHz |
| Sensitivity | 200 mV/mil (7.87 mV/μm) |
| Linearity Range | ±0.25 mils across an 80-mil range |
| Ingress Protection | IP65 (when properly installed and sealed) |
| Certifications | CE, RoHS compliant |
| Typical System Compatibility | Bently Nevada 7200 Series Proximitor and matching extension cables |
| Gewicht | 0.22 kg |
Product Applications
The 21504-000-012-05-02 is a highly versatile probe model suitable for various industrial machinery, including:
-
Gas and Steam Turbines
Monitoring shaft displacement, axial thrust, and vibration for early fault detection. -
Compressors (Axial, Centrifugal, Reciprocating)
Real-time monitoring von mechanical wear, rotor positioning, and misalignment. -
Industrial Motors & Generators
Shaft vibration and bearing condition monitoring to ensure safe operation. -
Gearboxes and Transmission Systems
Detection von gear misalignment and axial shifting under load. -
Pumps (Centrifugal and Positive Displacement)
Ideal for monitoring cavitation effects and detecting early-stage bearing damage. -
Fans, Blowers, and Sonstige High-Speed Equipment
Ensures vibration within tolerances to prevent premature equipment failure.
Product Advantages
-
Flexible Tip Configuration (5 mm and 8 mm)
Compatible with both tight spaces and standard applications, providing deployment flexibility. -
Accurate Eddy Current-Based Measurement
Offers reliable shaft vibration and displacement detection under dynamic load conditions. -
Robust Mechanical Design
Engineered for rugged environments with vibration, oil mist, and temperature fluctuations. -
Seamless System Integration
Matches precisely with Bently Nevada Proximitor sensors and extension cables. -
Low Drift and High Linearity
Maintains signal integrity and accuracy even in long-term industrial operation. -
Field-Proven Durability
Extensively deployed in demanding industries; trusted in mission-critical equipment. -
Fast Response Time
Real-time measurements suitable for high-speed rotating machinery protection systems.
Häufig gestellte Fragen (FAQ)
-
Can this probe be used with any proximity monitoring system?
Nr. It is designed specifically for use with Bently Nevada 7200 Series systems for accurate calibration. -
What makes it compatible with 8 mm configurations?
The probe design allows the use von tips in diameters, enabling fit in varied installation conditions. -
What type von materials can it measure accurately?
It is factory-calibrated for ferromagnetic materials such as AISI 4140 steel. -
Is this probe suitable for high-vibration applications?
Yes. It can tolerate peak vibrations up to 20 g, making it ideal for turbines and compressors. -
Can the probe cable length be modified after purchase?
Nr. Modifying cable length alters system calibration and is not recommended. -
Is recalibration necessary during equipment servicing?
Recalibration is advised during major overhauls or every 3–5 years. -
What is the expected lifespan von the probe?
With proper installation, it can operate effectively for over 5–10 years without degradation. -
How is the probe sealed against contaminants?
It comes with sealed connectors and an IP65-rated body to withstand industrial environments. -
Does it support hazardous area certification?
This model does not come with ATEX/IECEx certification. Check explosion-provon variants if needed. -
Is there a temperature limitation for continuous use?
Yes, it should be used within the -35°C to +120°C operating range for optimal accuracy.
Related Modells – Same Series or Function
| Modell Number | Beschreibung | Cable Length | Tip Diameter | Application |
|---|---|---|---|---|
| 21504-000-005-10-02 | Standard 5 mm probe | 10 ft | 5 mm | Compact sensor mounting |
| 21504-000-008-10-02 | Standard 8 mm probe | 10 ft | 8 mm | General purpose machinery monitoring |
| 330101-00-08-10-02 | 3300 XL 8 mm probe | 10 ft | 8 mm | Nächste-gen monitoring compatibility |
| 330103-00-05-10-02 | 3300 XL 5 mm probe | 10 ft | 5 mm | Used in space-constrained areas |
| 330104-00-05-10-02 | 3300 XL Proximitor system probe | 10 ft | 5 mm | High-sensitivity applications |
| 7200-14-10-01 | 7200 Proximitor Sensor | N/A | N/A | Matched with 21504 series probes |
Popular Modells from Bently Nevada
| Modell Number | Beschreibung | Kategorie | Function |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Rack Module | Communication interface for monitoring |
| 3500/42M | Proximitor Monitor | Rack Module | Interfaces proximity sensors |
| 330500 | High-Temperature Accelerometer | Vibration Sensor | For hot, heavy-duty machinery |
| 330180-91-00 | Velomitor Velocity Sensor | Casing Sensor | Measures velocity von machine casing |
| 3500/05 | 19″ Rack for 3500 Series Modules | Monitoring Hardware | Structural housing for system modules |
| 990-05-70-01-00 | Thrust Position Measurement Kit | Position Monitoring Kit | Axial displacement measurement |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
