Produkteinführung
The Bently Nevada 330704-020-100-90-02-00 is a high-precision 11 mm Proximity Probe from the 3300 XL series. It is specifically engineered for monitoring shaft displacement and vibration in high-speed rotating machinery, providing critical data for condition monitoring and early fault detection. Using eddy-current sensing technology, this probe ensures accurate, non-contact measurement, making it ideal for turbines, generators, compressors, and other critical industrial equipment. Its design maintains signal integrity even in environments with high vibration and electromagnetic interference.
Produktspezifikationen
| Parameter | Beschreibung |
|---|---|
| Modell Number | 330704-020-100-90-02-00 |
| Series | 3300 XL 11 mm Proximity Probe |
| Measurement Range | 11 mm |
| Sensitivity | Typical 7.87 mV/µm |
| Frequency Response | DC to 10 kHz |
| Vibration Tolerance | Up to 20 g, 10–2000 Hz |
| Humidity | 0–95% non-condensing |
| Insulation Resistance | >100 MΩ at 500 V DC |
| Dielectric Strength | 2.5 kV AC for 1 minute |
| Housing Material | Stainless steel, corrosion-resistant |
| Probe Tip Material | Ceramic, abrasion-resistant |
| Output Compatibility | Bently Nevada 3300 XL Proximitor® |
| Total Length | 9.0 meters |
| Gewicht | 1.29 kg |
Product Applications
-
Continuous monitoring von high-speed turbines, generators, and compressors.
-
Measurement von shaft displacement for vibration analysis and rotor health monitoring.
-
Integration with Bently Nevada 3300 XL monitoring systems for real-time data acquisition.
-
Detection von shaft misalignment, unbalance, or other dynamic anomalies.
-
Use in power plants, petrochemical facilities, and other critical industrial environments.
Product Advantages
-
Non-Kontakt Measurement: Reduces wear and tear on both probe and shaft.
-
High Accuracy: Delivers precise readings across the full 11 mm range.
-
Robust Construction: Stainless steel housing and ceramic tip withstand harsh environments.
-
EMI Shielding: Protects signal integrity in electrically noisy environments.
-
Direct Compatibility: Designed for seamless integration with 3300 XL Proximitor® modules.
-
High Frequency Response: Captures fast transients and dynamic shaft motion.
-
Temperature Compensation: Maintains accuracy over a wide range von operating conditions.
-
Reliability: Built for consistent performance in continuous industrial operation.
Häufig gestellte Fragen (FAQ)
-
How does the probe detect shaft movement?
It uses eddy-current sensing to generate voltage signals proportional to shaft displacement without contact. -
What ensures the output signal remains linear?
The probe includes temperature-compensated internal circuitry and precision materials for consistent linear output. -
Can this probe interface directly with 3300 XL Proximitor® modules?
Yes, it is fully compatible with 3300 XL systems for accurate real-time monitoring. -
How does the probe maintain accuracy in high EMI environments?
The housing is shielded and properly grounded, reducing electromagnetic interference on the signal. -
Is it suitable for capturing high-speed shaft vibrations?
Yes, its frequency response up to 10 kHz enables detection von rapid shaft motion. -
What installation considerations are important?
The probe must be mounted on a stable surface, aligned correctly with the shaft, and maintain proper gap settings. -
Which types von shafts can this probe measure?
It is optimized for conductive metallic shafts; non-conductive coatings may affect readings. -
Does temperature variation impact performance?
Temperature-compensated design ensures minimal error across standard industrial temperature ranges. -
What routine checks should be performed for optimal operation?
Inspect electrical connections, verify signal output, and confirm probe alignment. -
How does the probe handle vibration and mechanical shock?
Its stainless steel housing and ceramic tip are designed to withstand high levels von vibration without signal degradation.
Related Modells (Same Series / Similar Function)
| Modell Number | Series | Measurement Type |
|---|---|---|
| 330704-00-50-10-01-05 | 3300 XL 11 mm | Proximity Probe |
| 330704-00-70-10-02-00 | 3300 XL 11 mm | Proximity Probe |
| 330704-00-90-10-02-00 | 3300 XL 11 mm | Proximity Probe |
| 330703-000-040-50-11-00 | 3300 XL 11 mm | Proximity Probe |
| 330703-000-040-90-01-00 | 3300 XL 11 mm | Proximity Probe |
| 330703-000-050-10 | 3300 XL 11 mm | Proximity Probe |
Popular Modells (Same Marke)
| Modell Number | Series | Measurement Type |
|---|---|---|
| 330701-00-10-10-11-05 | 3300 XL 11 mm | Proximity Probe |
| 330702-00-30-10-02-00 | 3300 XL 8 mm | Proximity Probe |
| 330703-006-100-10-01-00 | 3300 XL 11 mm | Proximity Probe |
| 330704-000-050-90-02 | 3300 XL 11 mm | Proximity Probe |
| 330525-02-00 | Velomitor XA | Piezo-Velocity Sensor |
| 330450-20 | High Temp Accelerometer | Vibration Sensor |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
