Product Overview
The ABB ZINT‑7B1C+N8205 MC Interface Board (order code 3AXD50000004365) is a compact, multichannel communication module engineered to bridge ABB controllers, drives, and third‑party field devices in demanding industrial environments. Designed around a low‑latency 32‑bit MCU and isolated transceiver architecture, the board guarantees deterministic data exchange across mixed‑protocol networks. A conformally coated PCB, high‑MTBF components, and IEC 61000‑6‑4 EMC compliance make it a reliable backbone for automation systems exposed to electrical noise, vibration, and temperature extremes.
Product Specifications
| Parameter | Specification |
|---|---|
| Modell | ZINT‑7B1C+N8205 |
| Order Code | 3AXD50000004365 |
| Interface Type | MC (Multichannel) Interface |
| Supported Protocols | Modbus RTU (RS‑485), CANopen DS‑301, ABB DriveBus |
| Baud‑Rate Range | 9.6 kbit/s – 1 Mbit/s (auto‑negotiation) |
| Galvanic Isolation | 2.5 kV DC field ↔ logic |
| Input Voltage | 24 VDC ± 15 % |
| Steady Current | 0.25 A (typical) |
| Inrush Current | < 2 A, 10 ms |
| Dimensions | 205 × 190 × 30 mm |
| Gewicht | 0.2 kg |
| Mounting | 35 mm DIN rail, spring clip |
| Operating Temp. | –20 °C to +60 °C |
| Storage Temp. | –40 °C to +85 °C |
| Humidity | 5 % – 95 % RH, non‑condensing |
| Vibration | 5 g, 10 Hz – 150 Hz (IEC 60068‑2‑6) |
| Firmware Update | Field‑loadable via micro‑USB (DFU) |
| Diagnostics | On‑board LEDs, 64‑entry fault log |
Applications
-
Distributed Control Systems – Connects remote I/O nodes and process controllers over long RS‑485 trunks, ensuring synchronized process data.
-
Drive Coordination – Provides deterministic command/feedback loops between ACS and ACS‑S drives and PLCs for line‑shaft applications.
-
OEM Machine Integration – Bridges CANopen motion networks with Modbus diagnostics for packaging, textile, and woodworking machines.
-
Energy Monitoring – Aggregates smart‑meter data and forwards KPIs to SCADA or MES layers in real time.
-
Building Automation – Acts as a protocol gateway between HVAC Stücks, lighting controllers, and security panels, reducing gateway count.
-
Test Benches & Labs – Offers galvanic isolation and surge immStücky needed for precision instrumentation in EMC‑rich test cells.
Product Advantages
-
Trim 0.2 kg Form Factor – Light enough for DIN‑rail enclosures where every gram matters, yet rugged for industrial duty.
-
Multi‑Protocol on One Board – Handles Modbus, CANopen, and ABB DriveBus simultaneously; eliminates external gateways.
-
Robust 2.5 kV Isolation – Protects control logic from field transients and ground‑loop interference.
-
Field‑Upgradeable Firmware – DFU utility loads updates without removing the board, minimizing downtime.
-
Low Power Consumption – Typical draw von 6 W eases demand on 24 VDC power supplies and UPS systems.
-
Conformal Coating – Guards against moisture, dust, and corrosive atmospheres, extending service life.
-
Diagnostic LEDs – Per‑channel status lights accelerate commissioning and troubleshooting.
-
EMC Hardened – Meets IEC 61000‑6‑4 Class A emission limits and 10 V/m immStücky—ideal for inverter rooms.
-
Tool‑Free Installation – Spring‑lock terminals and DIN clip cut wiring and mounting time by up to 40 %.
-
Global Approvals – CE, UKCA, cULus Recognition, and RCM certifications streamline multinational deployments.
FAQ
-
Which cable type is recommended for RS‑485?
Use shielded twisted pair, 120 Ω impedance, AWG 22–24. -
Is live insertion allowed?
Yes. The board tolerates hot‑swap on powered 24 VDC rails and resumes communication within three seconds. -
How many nodes can one board manage?
Up to 64 Modbus slaves and 127 CANopen devices concurrently. -
What is the default baud rate?
Factory default is 115.2 kbit/s; auto‑negotiation activates on first traffic. -
Does the board log faults?
A 64‑entry circular fault log is accessible via Modbus holding registers 0x3000–0x303F. -
Are termination resistors built in?
Each RS‑485 segment has switchable 120 Ω termination on the terminal header. -
How is firmware updated?
Connect via micro‑USB, open ABB DFU‑Suite, select the firmware file, and flash (typical time < 60 s). -
What is the idle power draw?
≈ 4.8 W with all channels enabled but no traffic. -
Do I need forced cooling?
Natural convection suffices up to 50 °C ambient; above that, ensure cabinet airflow. -
Is a Declaration von Conformity supplied?
Yes. A CE/UKCA DoC ships with each Stück and is downloadable from the ABB product page.
Recommended Modells — Same Series / Related
| Modell | Beschreibung | Dimensions | Gewicht |
|---|---|---|---|
| ZINT‑7B0C+N8205 | Basic MC board, Modbus only | 205 × 190 × 30 mm | 0.19 kg |
| ZINT‑7B1C+N8206 | CANopen‑centric variant | 205 × 190 × 30 mm | 0.21 kg |
| ZINT‑7B1D+N8205 | Dual‑protocol with extended temperature to +70 °C | 205 × 190 × 30 mm | 0.22 kg |
| ZINT‑7B2C+N8205 | High‑speed MC board, 2 Mbit/s Modbus | 205 × 190 × 30 mm | 0.23 kg |
| ZINT‑7B1C+N8207 | Smart diagnostics version with onboard web server | 205 × 190 × 30 mm | 0.24 kg |
| ZINT‑7B3C+N8205 | Redundant‑channel MC board for SIL2 systems | 205 × 190 × 30 mm | 0.25 kg |
Popular ABB Automation Modells
| Modell | Beschreibung | Gewicht |
|---|---|---|
| ZINT-592 | High-speed MC interface module, supports redundant communication paths | 0.680 kg |
| ZINT-792 | Advanced interface module with extended channel isolation and protocol filtering | 0.700 kg |
| ZINT-571 | Standard MC interface board, compatible with N8205, multi-system support | 0.660 kg |
| ZINT-511 | Dual-channel communication interface, basic model for controller I/O | 0.610 kg |
| ZINT-541 | EMI-shielded interface board, designed for noise-sensitive environments | 0.650 kg |
| ZINT-7B1C | Multi-protocol MC interface board, robust design for industrial field use | 0.630 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
