مقدمة المنتج
The Bently Nevada 330876-03-10-01-00 3300 XL 50 mm Proximity Probe is a high-precision, non-contact sensor designed for monitoring shaft displacement and vibration in critical industrial machinery. Part من the 3300 XL series, this probe delivers accurate, high-fidelity measurements essential for condition monitoring and machinery protection systems. With a 50 mm probe tip, it is optimized for larger machinery applications such as turbines, compressors, and generators. The probe converts mechanical displacement into an electrical signal compatible with Bently Nevada Proximitor® sensors and monitoring systems, providing reliable early detection من misalignment, imbalance, or mechanical degradation.
Product Parameters
| Parameter | Specification |
|---|---|
| الطراز Number | 330876-03-10-01-00 |
| Probe Type | 3300 XL 50 mm Proximity Probe |
| Linear Range | 5–50 mm (depending on installation) |
| Sensitivity | 7.87 mV/µm nominal |
| Frequency Response | 0 Hz – 10 kHz (±3 dB) |
| Operating Temperature | –35 °C to +177 °C |
| Storage Temperature | –40 °C to +177 °C |
| Pressure Rating | Up to 2000 psi (137 bar) |
| Insulation Resistance | >10 MΩ @ 500 VDC |
| Cable Type | Factory-integrated, armored |
| Total Cable Length | 1.0 meter |
| الشحن الوزن | 3 kg |
Applications
-
Large Turbines – Shaft displacement and vibration monitoring for steam, gas, and hydro turbines.
-
Compressors – Continuous monitoring من high-speed compressors to prevent bearing damage or misalignment.
-
Electric Generators – Rotor position tracking for generator protection and performance optimization.
-
Industrial Pumps – Shaft vibration monitoring in critical process applications.
-
Petrochemical Plants – الحالة monitoring in high-pressure, high-temperature process equipment.
-
Heavy Industrial Equipment – Detects imbalance, rubs, or misalignment in large rotating machinery.
Advantages
-
High Accuracy – Provides precise linear measurement over a wide range with minimal thermal drift.
-
API 670 Compliance – Meets international standards for machinery protection and vibration monitoring.
-
Robust Design – Stainless steel construction and armored cable ensure durability in harsh industrial environments.
-
Wide Operating Range – Operates reliably under extreme temperatures, pressure, and vibration conditions.
-
Seamless System Integration – Fully compatible with 3300 XL Proximitor® sensors and monitoring systems.
-
Non-اتصل بنا Measurement – Reduces wear and maintenance while providing reliable continuous monitoring.
-
Easy Installation – Designed for rapid deployment in large machinery applications.
FAQ
-
What target material provides the most accurate measurement?
AISI 4140 or similar carbon steel is recommended for calibration and best accuracy. -
How is electromagnetic interference minimized?
The probe uses a coaxial design with grounded shielding to reduce external electrical noise. -
Can the probe operate in high-vibration environments?
Yes, it is designed to maintain stable measurements even under severe vibration. -
What is the typical output impedance من the probe system?
Approximately 50 Ω when connected to the specified Proximitor sensor. -
How does the probe compensate for temperature changes?
Internal materials and factory calibration minimize thermal drift across the operating temperature range. -
Is this probe compatible with older Bently Nevada drivers?
It is recommended to use with 3300 XL or 3500 series Proximitor drivers for full performance. -
What is the recommended gap voltage for optimal linearity?
Typically around –10 VDC at mid-gap position. -
How does cable length affect signal quality?
The probe is calibrated for a total system length; any modification requires recalibration. -
What protection does the probe provide against moisture ingress?
The assembly meets IP67 sealing when installed with proper hardware. -
What is the maximum static pressure rating at the probe tip?
The probe tip can withstand pressures up to 2000 psi (137 bar).
Recommended Related الطرازs
| الطراز | الوصف |
|---|---|
| 330876-03-10-01-01 | 3300 XL 50 mm Proximity Probe, alternate configuration |
| 330877-03-10-01-00 | 3300 XL 50 mm Proximity Probe, high-temperature variant |
| 330878-03-10-01-00 | 3300 XL 50 mm Reverse-Mount Probe |
| 330879-03-10-01-00 | 3300 XL 50 mm Dual-Purpose Probe |
| 330880-03-10-01-00 | 3300 XL 50 mm Long-Range Probe |
| 330881-03-10-01-00 | 3300 XL 50 mm NSv Narrow Side-View Probe |
Popular Bently Nevada الطرازs
| الطراز | Application |
|---|---|
| 3500/22M | Transient Data Interface Module |
| 3500/42M | Proximitor/Seismic Monitoring Module |
| 3500/50E | Keyphasor Module |
| 3500/60 | Temperature Monitoring Module |
| 3701/55 | Reciprocating Compressor Monitor |
| 330500 | Velomitor Velocity Transducer |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.