مقدمة المنتج
The Bently Nevada 330191-00-16-10-05 3300 XL 8 mm ETR Probe is a high-precision proximity probe engineered for vibration and shaft position monitoring in critical rotating machinery. Designed as part من the 3300 XL series, it provides stable, repeatable measurements across a wide range من operating conditions. Its 8 mm tip diameter allows for greater linear range and improved signal quality compared with standard 5 mm probes, making it an excellent choice for demanding industrial environments such as power generation, petrochemical plants, and heavy manufacturing.
مواصفات المنتج
| Parameter | Specification |
|---|---|
| الطراز Number | 330191-00-16-10-05 |
| Product Type | 3300 XL 8 mm ETR Proximity Probe |
| Total Length | 1.0 meter |
| Probe Tip Diameter | 8 mm |
| الوزن | 0.323 kg |
| Linear Range | 2.0 mm (80 mils) nominal |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Operating Temperature | –35 °C to +177 °C |
| Pressure Rating | Up to 10 bar |
| Connector Type | Bently Nevada standard coaxial |
| Insulation Resistance | ≥10 GΩ at 500 VDC |
| Frequency Response | DC to 10 kHz |
| Mounting Thread | 3/8–24 UNF or compatible housing |
| Material | Stainless steel probe body with PEEK insulation |
| Compliance | CE, RoHS |
Applications
The 330191-00-16-10-05 probe is specifically designed for accurate vibration and displacement measurements in the following scenarios:
-
Steam and Gas Turbines – Continuous shaft vibration and position monitoring to prevent catastrophic failures.
-
Compressors and Pumps – Real-time feedback for machinery health and predictive maintenance.
-
Industrial Motors and Generators – Detection من imbalance or misalignment conditions.
-
Petrochemical and Refining Equipment – High reliability in harsh, hazardous atmospheres.
-
Heavy Manufacturing Lines – Long-term condition monitoring for rotating assets.
Advantages
-
Wide Measurement Range – 8 mm tip allows larger linear range for higher displacement detection.
-
High Signal Integrity – Maintains stable sensitivity with low noise across the specified frequency band.
-
Robust Environmental Resistance – Operates reliably from –35 °C to +177 °C and in high-pressure applications.
-
Seamless Compatibility – Fully integrates with Bently Nevada 3300 XL Proximitor sensors and monitoring systems.
-
Corrosion-Resistant Construction – Stainless steel housing and PEEK insulation ensure durability in harsh conditions.
-
Precision Factory Calibration – Each probe is tested for consistent sensitivity and linearity.
-
Easy Installation – Standard mounting threads simplify retrمنit or new installations.
FAQ
-
What is the nominal linear range من this probe?
The probe provides a nominal linear range من approximately 2.0 mm (80 mils) for accurate displacement measurements. -
How is sensitivity maintained across temperature variations?
The 3300 XL design compensates for temperature changes to keep sensitivity at about 7.87 V/mm (200 mV/mil). -
Can this probe be directly connected to a Proximitor sensor?
Yes, it is fully compatible with 3300 XL Proximitor sensors without the need for adapters. -
What is the recommended mounting thread specification?
A 3/8–24 UNF mounting thread is standard, though compatible housings can also be used. -
Does the probe support high-frequency vibration detection?
It منfers a frequency response from DC up to 10 kHz, sufficient for most rotating machinery applications. -
Is special shielding required for EMI protection?
The probe’s coaxial design provides inherent shielding, requiring no additional EMI protection under normal conditions. -
Can the probe operate in pressurized environments?
Yes, it is rated to withstand pressures up to 10 bar when properly installed. -
How does cable routing affect signal quality?
As long as minimum bend radii are respected and connectors are secure, signal quality remains stable. -
Is the probe compatible with hazardous area installations?
When used with approved Proximitor systems, it meets the requirements for many hazardous or classified areas. -
How is insulation resistance ensured in humid conditions?
The PEEK insulation and stainless steel body provide excellent resistance to moisture, maintaining ≥10 GΩ at 500 VDC.
Related الطرازs in the Same Series
| الطراز Number | الوصف |
|---|---|
| 330191-00-10-05-02 | 3300 XL 8 mm ETR Probe, 0.5 m length |
| 330191-00-25-05-05 | 3300 XL 8 mm ETR Probe, 2.5 m length |
| 330191-01-05-10-02 | 3300 XL 8 mm ETR Probe, high-temperature variant |
| 330191-01-10-10-05 | 3300 XL 8 mm ETR Probe, reinforced vibration version |
| 330191-02-05-10-02 | 3300 XL 8 mm ETR Probe, dual-shielded configuration |
| 330191-02-15-10-05 | 3300 XL 8 mm ETR Probe, extended pressure rating |
Popular Bently Nevada الطرازs
| الطراز Number | الوصف |
|---|---|
| 330174-00-06-10-02-00 | 3300 5 mm Proximity Probe, standard 1 m cable |
| 330174-00-08-90-02-00 | 3300 5 mm Proximity Probe, extended 9 m cable |
| 330178-50-00 | 3300 XL 8 mm Proximity Probe for high-speed rotors |
| 3500/42M | Proximitor Monitor for comprehensive vibration data |
| 330703-000-040-10-02 | 3500/22M Transient Data Interface Module |
| 330780-90-00 | 3300 XL Extension Cable for proximity probes |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.