Product Overview
The Bently Nevada 330103-00-20-10-01-00 is part من the 3300 XL 8 mm Proximity Transducer System. This proximity probe is designed for critical machinery monitoring, providing accurate measurements من shaft vibration, displacement, and position. The probe is suitable for fluid-film bearing machines and is compliant with API 670 standards.
Key Features
-
Compliant with API 670 standards
-
Measures both static and dynamic displacement
-
Highly resistant to RFI/EMI
-
ClickLoc connectors for secure, tool-free installation
-
Compatible with both XL and non-XL systems
-
No bench calibration required
Technical Specifications
| Parameter | الوصف |
|---|---|
| الطراز Number | 330103-00-20-10-01-00 |
| Probe Tip Diameter | 8.0 mm |
| Thread Type | M10 x 1 |
| Total Length | 1.0 meter |
| Cable Type | Standard ClickLoc coaxial connector |
| Target Material Calibration | AISI 4140 steel |
| Linear Range | 0.25 to 2.3 mm (10 to 90 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) ±5% (standard 1 m) |
| Case Material | AISI 303/304 stainless steel |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Operating Temperature | –52°C to +177°C |
| الوزن | 0.323 kg |
| Frequency Response | 0 to 10 kHz (+0, –3 dB) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter |
| Shaft Diameter Recommendation | ≥76.2 mm (3 in) for optimal performance |
Applications
-
Steam and gas turbines
-
Compressors and pumps
-
Generators and motors
-
Keyphasor speed sensing
-
Shaft vibration and thrust position monitoring
Product Advantages
-
No field calibration required
-
High immوحدةy to environmental noise and interference
-
Modular components allow full interchangeability
-
Rugged probe tip construction improves durability
-
الدعمs high-temperature applications with ETR options
FAQs
Q1: What does the 330103-00-20-10-01-00 probe measure?
A1: It measures shaft displacement, vibration, and position.
Q2: Is this probe compatible with older 3300 systems?
A2: Yes, it is electrically and mechanically compatible with non-XL 3300 5 mm and 8 mm systems.
Q3: Does the probe require field calibration?
A3: No, it is factory-calibrated and fully interchangeable.
Q4: What is the recommended shaft diameter for accurate readings?
A4: A shaft diameter من at least 76.2 mm (3 inches) is recommended.
Q5: Can this probe be used in hazardous areas?
A5: Yes, it meets CSA, ATEX, and IECEx requirements for hazardous locations.
Q6: What type من connector is used on this model?
A6: It uses a miniature ClickLoc coaxial connector.
Q7: What is the typical total system weight?
A7: For a 1-meter configuration, the weight is approximately 0.323 kg.
Q8: Can it operate at high temperatures?
A8: Yes, it supports –52°C to +177°C; ETR versions support even higher.
Q9: Is this probe suitable for speed (Keyphasor) measurements?
A9: Yes, it supports Keyphasor and overspeed applications when installed per guidelines.
Q10: What is the material من the probe case and tip?
A10: The case is stainless steel (AISI 303/304); the tip is PPS plastic.
Related الطرازs (Same Series)
| الطراز Number | Thread Type | Armor | Length (m) | الوزن (kg) |
|---|---|---|---|---|
| 330101-00-20-10-02-00 | 3/8-24 UNF | No | 1.0 | 0.323 |
| 330102-00-20-10-02-00 | 3/8-24 UNF | Yes | 1.0 | 0.340 |
| 330104-00-20-10-02-00 | M10 x 1 | Yes | 1.0 | 0.340 |
| 330140-00-20-10-02-00 | Smooth Case | No | 1.0 | 0.323 |
| 330192-00-20-10-02-05 | 3/8-24 UNF | Yes | 1.0 (ETR) | 0.340 |
| 330194-00-20-10-02-05 | M10 x 1 | Yes | 1.0 (ETR) | 0.340 |
Popular Bently Nevada الطرازs
| الطراز Number | الوصف | Application Area | الوزن (kg) |
|---|---|---|---|
| 3500/42M | Proximitor Seismic Monitor | Vibration Monitoring | 0.45 |
| 3500/22M | Transient Data Interface Module | Data Collection | 0.40 |
| 3500/33 | 16-Channel Relay Module | Alarm Outputs | 0.50 |
| 3500/25 | Keyphasor Module | Rotational Speed | 0.35 |
| 330180-91-00 | Proximitor Sensor 1.0 m | Probe Interface | 0.25 |
| 330104-00-06-10-11-00 | 3300 XL 8 mm Proximity Probe | Vibration Monitoring | 0.323 |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.