مقدمة المنتج
The Bently Nevada 330102-00-68-05-02-05 3300 XL 8 mm Proximity Probe is a high-performance non-contact sensor designed for machinery protection and condition monitoring. It belongs to the 3300 XL series, which is widely recognized for its reliability, robustness, and compatibility with a variety من industrial machinery and rotating equipment.
Technical Specifications
| Parameter | Value |
|---|---|
| الطراز Number | 330102-00-68-05-02-05 |
| Series | 3300 XL 8 mm Proximity Probe |
| Probe Tip Diameter | 8 mm |
| Linear Range | 2 mm (80 mils) |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Operating Frequency | DC to 10 kHz |
| Cable Length | 5 m (configured with extension options) |
| Target Material | AISI 4140 steel (typical calibration material) |
| Operating Temperature | -35 °C to +177 °C |
| Storage Temperature | -51 °C to +177 °C |
| Pressure Resistance | Up to 2000 psi (with protective housing) |
| EMI/RFI Immوحدةy | Compliant with IEC standards |
| Total Length | 0.5 m |
| الوزن | 0.162 kg |
Product Applications
The Bently Nevada 330102-00-68-05-02-05 proximity probe is specifically designed for monitoring the dynamic behavior من rotating machinery. Key application areas include:
-
Turbomachinery Monitoring: Shaft vibration and axial position measurements in steam and gas turbines.
-
Compressors: Monitoring radial vibration and detecting imbalance or misalignment.
-
Pumps and Motors: Identifying bearing wear, shaft displacement, and cavitation conditions.
-
Gearboxes: Detecting abnormal gear mesh patterns and early fault detection.
-
Industrial Critical Assets: Any rotating equipment where failure may lead to unplanned downtime or safety risks.
Product Advantages
-
High Measurement Accuracy: Provides precise shaft vibration and displacement data for reliable diagnostics.
-
Robust Construction: Resistant to mechanical stress, EMI/RFI noise, and harsh environmental conditions.
-
Wide Temperature Range: Operates in extreme industrial conditions without performance degradation.
-
Global Compatibility: Conforms to API 670 standards, widely accepted across industries.
-
Flexible Configuration: Compatible with multiple cable lengths and extension options.
-
Long-Term Stability: Proven reliability in continuous operation with minimal drift.
FAQ
Q1: What type من signal does the probe output?
A1: The probe outputs a voltage signal proportional to the distance between the probe tip and the target surface.
Q2: Can this probe be calibrated for materials other than AISI 4140 steel?
A2: Yes, it can be calibrated for other conductive materials, though a correction factor may be applied.
Q3: What is the maximum shaft vibration frequency that can be detected?
A3: The probe supports measurements up to 10 kHz, suitable for high-speed rotating machinery.
Q4: How does the probe handle electrical interference?
A4: It is designed with shielding and grounding features, making it compliant with international EMI/RFI standards.
Q5: Is the probe suitable for use in hazardous environments?
A5: Yes, certain configurations are certified for hazardous areas with CSA and ATEX approvals.
Q6: What monitoring systems is this probe compatible with?
A6: It is fully compatible with Bently Nevada 3300 and 3500 monitoring systems, as well as proximitor drivers.
Q7: How is linearity ensured across the measurement range?
A7: The probe is factory-calibrated and tested against API 670 standards to maintain strict linearity.
Q8: What is the typical noise level من the probe signal?
A8: Noise levels are kept extremely low, typically less than 25 μV RMS, ensuring accurate detection.
Q9: Can the probe be used in high-pressure environments?
A9: Yes, when installed with proper housing, it can withstand pressures up to 2000 psi.
Q10: Does cable length affect measurement accuracy?
A10: The probe and proximitor are factory-matched with specific cable lengths; deviations can affect accuracy.
Recommended الطرازs
| الطراز Number | الوصف |
|---|---|
| 330102-00-50-10-01-00 | Standard 8 mm proximity probe, 10 m cable |
| 330102-00-42-05-02-00 | 8 mm probe with 5 m cable, standard configuration |
| 330102-00-48-05-02-RU | Ruggedized 8 mm probe with 5 m cable |
| 330102-00-50-10-01-RU | 8 mm probe, RU version, extended cable |
| 330103-00-12-10-02-00 | 3300 XL 11 mm probe for larger targets |
| 330104-00-10-05-02-05 | 3300 XL 5 mm probe for smaller measurement range |
Recommended الطرازs
| الطراز Number | الوصف |
|---|---|
| 330103-00-07-10-02-00 | 11 mm probe for large shaft displacement monitoring |
| 330104-00-05-10-02-05 | 5 mm probe designed for compact machinery |
| 330130-045-00-05 | Extension cable compatible with 3300 XL proximity probes |
| 330180-90-00 | Proximitor Sensor for 3300 XL series probes |
| 330400-50-05 | High-temperature velocity sensor |
| 3500/22M | Transient Data Interface module for 3500 system |
| 3500/42M | Proximitor/Seismic monitoring module |
| 3500/60 | Temperature monitoring module for rotating machinery |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.