Bently Nevada 21504-00-40-10-02 7200 8mm Standard Mount Probe

Product Overview

The Bently Nevada 21504-00-40-10-02 is a high-performance proximity probe designed as part من the trusted 7200 Series. It features an 8mm probe tip and comes with a 40-inch integral cable, making it ideal for installations requiring extended distance between the sensing point and the proximitor. This standard mount probe is engineered for continuous monitoring من rotating machinery, providing precise non-contact measurements من shaft vibration and position.

Built to comply with API 670 guidelines, this probe is widely used in the oil & gas, petrochemical, power generation, and heavy industrial sectors. It works in conjunction with a proximitor sensor and extension cable to form a complete eddy-current proximity measurement system. Its rugged design, superior stability, and ease من installation make it a long-term solution for machinery protection systems.

Technical Specifications

Applications

The Bently Nevada 21504-00-40-10-02 proximity probe is suitable for a broad range من industrial and critical applications:

• Steam Turbines: Monitoring shaft vibration and axial displacement.

• Gas Compressors: Shaft behavior analysis in high-speed rotating systems.

• Centrifugal and Reciprocating Pumps: Detecting imbalance and misalignment.

• Electric Motors and Generators: Rotor position tracking and vibration detection.

• Gearboxes and Couplings: Early fault detection via shaft displacement signals.

• Refineries and Chemical Plants: Integration into condition monitoring and safety systems.

Its 40-inch cable length makes it especially useful where access to the target surface is limited, or routing constraints are present.

Product Advantages

• Extended Cable Length: 1.0 meter integrated cable supports flexible installation without compromising signal quality.

• Robust Mechanical Design: Stainless steel body and high-temperature rated tip ensure durability in aggressive environments.

• Industry Compliance: Conforms to API 670 standards, ensuring compatibility with critical rotating equipment monitoring specifications.

• ممتاز Signal Integrity: Delivers stable 200 mV/mil output across the full measurement range.

• Non-اتصل بنا Operation: Provides accurate vibration and displacement data without physical wear on machinery.

• Fast Response Time: Wide frequency response enables detection من rapid machinery behavior changes.

• IP65 Rated Housing: Offers reliable protection against dust and moisture when properly installed.

• Field Replaceable: Designed for ease من maintenance and field replacement with minimal downtime.

• Global الدعم: Backed by Bently Nevada’s comprehensive service network for technical assistance.

• Long Operating Life: Built to withstand extreme industrial operating conditions for continuous usage.

الأسئلة الشائعة (FAQ)

1. Q: What distinguishes the 21504-00-40-10-02 from other 8mm probes?
   A: The key distinction is its 1.0 meter total length, which allows for installations where longer reach is required.

2. Q: What system does this probe belong to?
   A: It is part من the Bently Nevada 7200 proximity transducer system.

3. Q: Is this probe compatible with the 3300 XL proximitor?
   A: No, it is designed specifically for use with 7200 series proximitor sensors.

4. Q: How should this probe be mounted?
   A: It should be thread-mounted using the standard 3/8-24 UNF threads.

5. Q: What type من output signal does this probe generate?
   A: The probe outputs a linear voltage signal من 200 mV/mil, typically processed through a proximitor.

6. Q: Can the probe withstand oil and steam exposure?
   A: Yes, the housing and probe tip materials are resistant to most industrial chemicals and high humidity.

7. Q: What is the recommended gap voltage?
   A: Typically, the system is adjusted to -10 VDC at a 1.0 mm (40 mils) gap.

8. Q: Does the longer cable affect measurement accuracy?
   A: No, the cable length is matched to the proximitor system to maintain calibrated accuracy.

9. Q: Is this probe field-replaceable?
   A: Yes, the probe is designed to be replaced in the field with minimal disassembly.

10. Q: What kind من maintenance is required?
    A: Periodic visual inspections and verification من calibration during scheduled maintenance intervals are recommended.

Related الطرازs (Same Series or Function)

Popular Bently Nevada الطرازs (Same العلامة التجارية)

معلومات الشركة

E-mail: [email protected]

Mobile：يرجى الاتصال عبر البريد الإلكتروني

Whatsapp：يرجى الاتصال عبر البريد الإلكتروني

Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006

خدماتنا

نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.

يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.

نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.