产品介绍
The Bently Nevada 330908-24-37-05-02-RU 3300 NSv Proximity Probe is an advanced non-contact displacement sensor designed for highly accurate monitoring / shaft vibration and rotor position in compact or limited-space machinery. Built on the proven 3300 NSv (Narrow Side-view) platform, this probe /fers exceptional performance in environments where installation space is restricted yet high sensitivity and precision are essential. Its rugged stainless-steel housing and optimized sensing tip make it ideal for critical equipment such as turbines, compressors, pumps, and industrial motors operating in harsh industrial settings. With superior signal stability, excellent temperature tolerance, and compatibility with Bently Nevada monitoring systems, it enables predictive maintenance and early fault detection to enhance machine reliability and reduce downtime.
产品规格
| Parameter | 描述 |
|---|---|
| 型号 Number | 330908-24-37-05-02-RU |
| Series | 3300 NSv |
| Probe Tip Diameter | 8 mm |
| Total Length | 0.5 meter |
| Measurement Range | 0–2.0 mm nominal |
| Sensitivity | 7.87 V/mm (200 mV/mil) typical |
| Linear Range | ±1.0 mm around nominal gap |
| Frequency Response | 0 to 10 kHz |
| Operating Temperature | –35 °C to +177 °C |
| Storage Temperature | –50 °C to +200 °C |
| Housing Material | Industrial-grade stainless steel |
| Mounting Thread | 1/4–28 UNF or equivalent clamp |
| 重量 | 0.15 kg |
| Compatible Drivers | 3300 NSv Proximitor and 3300 Series Monitoring Systems |
Applications
-
Turbomachinery Monitoring: Ideal for steam, gas, and hydro turbines to detect rotor displacement and vibration.
-
Compressors and Pumps: Detects early signs / imbalance or bearing issues in rotating equipment.
-
Electric Motors and Generators: Provides accurate shaft position feedback for predictive maintenance.
-
Industrial Fans and Gearboxes: Enables detection / misalignment or mechanical looseness.
-
Petrochemical and Refinery Equipment: Operates reliably in high-temperature, corrosive environments.
-
Aerospace and Power Generation: Critical for high-speed machinery where compact sensor installation is necessary.
Advantages
-
High Precision: Eddy current sensing ensures repeatable, accurate displacement measurements.
-
Compact 8 mm Tip Design: Suitable for installations where space is limited without compromising performance.
-
Durable Construction: Stainless steel body withstands vibration, corrosion, and extreme conditions.
-
Wide Operating Range: Maintains accuracy from –35 °C to +177 °C.
-
优秀 Frequency Response: Capable / capturing rapid shaft movements up to 10 kHz.
-
Seamless System Integration: Fully compatible with Bently Nevada 3300 NSv Proximitor systems.
-
Low Maintenance: Non-contact measurement reduces mechanical wear and maintenance intervals.
-
Enhanced Machine Reliability: Enables predictive maintenance to prevent costly downtime.
FAQ
-
What sensing principle does the 330908-24-37-05-02-RU probe use?
It uses an eddy current principle to measure shaft vibration and displacement without physical contact. -
Which monitoring systems are compatible with this probe?
It integrates directly with Bently Nevada 3300 NSv Proximitor and standard 3300 series monitoring systems. -
What is the typical output sensitivity?
The probe provides a standard sensitivity / approximately 7.87 V/mm (200 mV/mil). -
What is the recommended mounting method for stable measurements?
The probe is mounted using a 1/4–28 UNF threaded connection or a compatible clamping bracket for secure installation. -
What is the linear range / measurement for accurate readings?
It maintains linear accuracy within ±1.0 mm around the nominal probe-to-shaft gap. -
Is the probe capable / operating in high-vibration environments?
Yes, it is specifically designed to withstand and accurately measure vibration in demanding industrial settings. -
What is the frequency response / this proximity probe?
The probe can capture shaft dynamics with a frequency response / up to 10 kHz. -
Does the probe require routine calibration after installation?
Initial calibration with the associated Proximitor driver is recommended; periodic recalibration is minimal. -
How does the probe handle electromagnetic interference?
Its shielded cable and stainless steel housing provide excellent resistance to EMI and RFI interference. -
Can the probe measure both static and dynamic displacement?
Yes, it simultaneously measures static shaft displacement and dynamic vibration for comprehensive monitoring.
Recommended Related 型号s (Same Series)
| 型号 | 描述 |
|---|---|
| 330908-00-08-05-02 | Standard 8 mm NSv proximity probe |
| 330908-00-10-05-02 | 8 mm probe with alternative cable length |
| 330908-00-12-05-02 | High-sensitivity NSv probe for confined spaces |
| 330908-00-14-05-02 | Reverse-mount 8 mm probe |
| 330908-00-18-05-02 | Extended temperature-range NSv probe |
| 330908-00-20-05-02 | Heavy-duty 8 mm probe for harsh environments |
Popular Bently Nevada 型号s
| 型号 | 描述 |
|---|---|
| 330104-00-10-10-02-00 | 8 mm 3300 XL proximity probe |
| 330130-040-00 | Standard 3300 XL extension cable |
| 330180-91-05 | 3300 XL NSv proximity probe |
| 330400-50-05 | Dual-channel vibration and position transducer |
| 3500/42M | Proximitor monitor for dynamic and static measurements |
| 330500-02-00 | High-temperature 3300 XL 11 mm proximity probe |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。