产品介绍
The Bently Nevada 330905-00-15-05-02-05 3300 NSv Proximity Probe is a high-precision, non-contact sensor designed to monitor vibration and shaft displacement in critical rotating machinery. As part / the 3300 NSv (Narrow Side View) series, this probe is ideal for installations where space is limited but reliable and accurate measurements are essential. Using advanced eddy-current sensing technology, it provides real-time detection / shaft vibration and axial displacement, enabling predictive maintenance and early fault detection. Its robust stainless-steel housing with hermetic sealing ensures performance stability and durability in extreme industrial environments, including turbines, compressors, pumps, and electric motors.
Technical Specifications
| Parameter | 描述 |
|---|---|
| 型号 Number | 330905-00-15-05-02-05 |
| Series | 3300 NSv Proximity Probe |
| Total Length | 0.5 meter |
| 重量 | 0.15 kg |
| Sensing Principle | Eddy current, non-contact displacement measurement |
| Tip Diameter | 5 mm (nominal) |
| Linear Range | 0.25 mm to 2.0 mm (material dependent) |
| Sensitivity | 7.87 V/mm ±5% |
| Frequency Response | 0 to 10 kHz (typical) |
| Operating Temperature | –35 °C to +177 °C |
| Probe Material | Hermetically sealed stainless steel |
| Insulation Resistance | >10 MΩ at 500 VDC |
| Power Requirement | Requires compatible Bently Nevada proximitor |
| Connector Type | Standard Bently Nevada miniature coaxial |
| Mounting Thread | M10 × 1.0 or 3/8-24 UNF (depends on configuration) |
| Compliance | CE, RoHS, and ATEX certified for hazardous areas |
Applications
The 330905-00-15-05-02-05 probe is widely used in industries requiring precise monitoring / rotating machinery:
-
Steam and Gas Turbines – Monitors shaft vibration and axial displacement to prevent misalignment and imbalance.
-
Compressors and Pumps – Detects bearing wear, cavitation, and mechanical looseness at early stages.
-
Motors and Generators – Provides accurate rotor dynamics monitoring for predictive maintenance programs.
-
Gearboxes and Industrial Fans – Monitors gear mesh irregularities and vibration to ensure reliable operation.
-
OEM Machinery – Compact NSv design allows integration into machinery with restricted space.
Advantages
-
High Measurement Accuracy – Eddy-current technology ensures precise and reliable readings.
-
Compact NSv Design – Narrow Side View configuration allows installation in tight spaces.
-
Rugged Construction – Stainless steel housing with hermetic sealing protects against dust, moisture, and corrosive environments.
-
Seamless Integration – Fully compatible with Bently Nevada 3300 series monitoring systems for straightforward installation and calibration.
-
Wide Operating Temperature – Reliable performance from –35 °C to +177 °C.
-
Low Maintenance – Non-contact operation eliminates mechanical wear, reducing downtime.
FAQ
-
Which target material ensures optimal calibration accuracy?
Factory calibration is performed for AISI 4140 steel; other ferromagnetic materials may require recalibration. -
What is the maximum cable extension supported?
Extensions up to 9 meters are supported when used with a compatible proximitor. -
Can this probe be used in hazardous environments?
Yes, it meets ATEX and CE Zone 1 requirements when installed with certified accessories. -
How does temperature variation affect measurement accuracy?
Integrated temperature compensation minimizes drift across the full operating range. -
What is the typical output sensitivity when connected to a proximitor?
200 mV per mil (7.87 V/mm) with ±5% tolerance. -
Does this probe provide both dynamic vibration and static shaft position measurements?
Yes, it delivers simultaneous vibration and displacement signals. -
What is the recommended minimum bend radius during installation?
A minimum bend radius / 25 mm is recommended to maintain cable integrity. -
Is periodic recalibration required?
Recalibration is generally only necessary after major system reconfiguration or component replacement. -
Is the probe shielded against electromagnetic interference (EMI)?
Yes, coaxial cable and internal shielding provide excellent EMI resistance. -
Is it compatible with older Bently Nevada monitoring systems?
Yes, when used with the appropriate proximitor and proper calibration procedures.
Related 型号s in the Same Series
| 型号 | 描述 |
|---|---|
| 330904-08-15-10-02-05 | NSv probe, 1 m cable length |
| 330904-00-10-10-01-05 | Standard NSv probe with 1 m cable |
| 330905-00-05-50-02-00 | Long cable NSv probe, 5 m integral cable |
| 330904-05-14-05-02-00 | NSv probe, 0.5 m cable length |
| 330909-00-05-05-02-00 | High-temperature NSv probe |
| 330930-040-01-00 | Extended linear range NSv probe for larger shafts |
Popular Bently Nevada 型号s
| 型号 | Application |
|---|---|
| 3500/22M | Rack Interface Module for advanced machine monitoring |
| 330105-02-12-10-02-00 | Standard proximity probe for general industrial use |
| 330400 | High-performance accelerometer for vibration detection |
| 330500 | Velocity transducer for rotating equipment |
| 330780-91-05 | Proximitor sensor for precision displacement monitoring |
| 3500/42M | Advanced vibration monitor with diagnostics |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。