产品介绍
The Bently Nevada 330905-00-12-05-02-RU 3300 NSv Proximity Probe is a high-precision, non-contact vibration and displacement sensor designed for critical machinery monitoring and protection. Part / the 3300 NSv (Narrow Side View) series, this model provides accurate shaft position and vibration measurement in installations with limited space, while ensuring reliable long-term performance. Using advanced eddy-current technology, it /fers real-time detection / shaft vibration and displacement, supporting early fault detection and predictive maintenance. Its robust stainless-steel construction and hermetic sealing make it ideal for harsh industrial environments, including turbines, compressors, pumps, and large electric motors, providing consistent performance under extreme operating conditions.
Technical Specifications
| Parameter | 描述 |
|---|---|
| 型号 Number | 330905-00-12-05-02-RU |
| Series | 3300 NSv Proximity Probe |
| Total Length | 0.5 meter |
| 重量 | 0.15 kg |
| Sensing Principle | Eddy current, non-contact displacement measurement |
| Tip Diameter | 5 mm (nominal) |
| Linear Range | 0.25 mm to 2.0 mm (material dependent) |
| Sensitivity | 7.87 V/mm ±5% |
| Frequency Response | 0 to 10 kHz (typical) |
| Operating Temperature | –35 °C to +177 °C |
| Probe Material | Hermetically sealed stainless steel |
| Insulation Resistance | >10 MΩ at 500 VDC |
| Power Requirement | Requires compatible Bently Nevada proximitor |
| Connector Type | Standard Bently Nevada miniature coaxial |
| Mounting Thread | M10 × 1.0 or 3/8-24 UNF (varies by configuration) |
| Compliance | CE, RoHS, and ATEX certified for hazardous areas |
Applications
The 330905-00-12-05-02-RU probe is commonly used in industries requiring precise shaft vibration and displacement monitoring for critical rotating machinery:
-
Steam and Gas Turbines – Monitors axial displacement and vibration to prevent imbalance and misalignment.
-
Compressors and Pumps – Detects early-stage bearing wear, cavitation, and mechanical looseness.
-
Motors and Generators – Provides accurate rotor dynamics tracking for predictive maintenance.
-
Gearboxes and Industrial Fans – Monitors gear mesh irregularities and shaft vibration for reliable operation.
-
OEM Machinery – Compact design allows installation in restricted spaces and custom machinery.
Advantages
-
High Accuracy – Advanced eddy-current sensing ensures precise and stable measurements.
-
Compact NSv Design – Narrow Side View construction allows installation in tight or confined spaces.
-
Durable Construction – Stainless steel housing with hermetic sealing protects against dust, moisture, and corrosive environments.
-
Seamless System Integration – Compatible with Bently Nevada 3300 series monitoring systems for easy setup and calibration.
-
Wide Operating Temperature – Reliable performance from –35 °C to +177 °C in harsh industrial conditions.
-
Low Maintenance – Non-contact design eliminates mechanical wear and reduces downtime.
FAQ
-
Which target material is optimal for calibration?
Factory calibration is done for AISI 4140 steel; other ferromagnetic materials may require recalibration. -
What is the maximum cable extension supported?
Extensions up to 9 meters are supported when paired with a compatible proximitor. -
Can this probe be used in hazardous environments?
Yes, it meets ATEX and CE Zone 1 requirements when installed with certified accessories. -
How does temperature variation affect measurement accuracy?
Integrated temperature compensation minimizes signal drift across the full operating range. -
What is the typical output sensitivity when connected to a proximitor?
Standard output is 200 mV per mil (7.87 V/mm) with ±5% tolerance. -
Does the probe provide both dynamic vibration and static shaft position measurements?
Yes, it delivers simultaneous vibration and displacement signals. -
What is the minimum recommended bend radius during installation?
A minimum bend radius / 25 mm is recommended to maintain cable integrity. -
Is periodic recalibration required?
Calibration is generally only necessary after major system reconfiguration or component replacement. -
Is the probe shielded against electromagnetic interference (EMI)?
Yes, coaxial cable and internal shielding provide excellent EMI resistance. -
Is it compatible with older Bently Nevada monitoring systems?
Yes, when used with the correct proximitor and calibration procedures.
Related 型号s in the Same Series
| 型号 | 描述 |
|---|---|
| 330904-08-15-10-02-05 | NSv probe, 1 m cable length |
| 330904-00-10-10-01-05 | Standard NSv probe with 1 m cable |
| 330905-00-05-50-02-00 | Long cable NSv probe, 5 m integral cable |
| 330904-05-14-05-02-00 | NSv probe, 0.5 m cable length |
| 330909-00-05-05-02-00 | High-temperature NSv probe |
| 330930-040-01-00 | Extended linear range NSv probe for larger shafts |
Popular Bently Nevada 型号s
| 型号 | Application |
|---|---|
| 3500/22M | Rack Interface Module for advanced machine monitoring |
| 330105-02-12-10-02-00 | Standard proximity probe for general industrial use |
| 330400 | High-performance accelerometer for vibration detection |
| 330500 | Velocity transducer for rotating equipment |
| 330780-91-05 | Proximitor sensor for precision displacement monitoring |
| 3500/42M | Advanced vibration monitor with diagnostics |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。