产品介绍
The Bently Nevada 330104-00-05-20-02-05 belongs to the trusted 3300 XL 8 mm Proximity Transducer System, known across industries for its high reliability and precision in non-contact position and vibration measurement. This probe is specifically engineered for use in industrial machinery where accurate monitoring / shaft position and movement is critical to protecting equipment and ensuring operational efficiency.
This model features an M10 x 1 threaded body, a 0.5-meter integral cable, and a special connector configuration designed for systems with specific mounting constraints or environmental needs. The 3300 XL system components (probe, extension cable, and Proximitor® sensor) are all calibrated as a set to ensure exceptional measurement accuracy.
Commonly used in turbines, compressors, motors, and pumps, this probe delivers outstanding performance in hazardous and non-hazardous locations alike. The XL series is also well regarded for its resistance to electrical interference, temperature extremes, and physical vibration—ensuring consistent operation in tough industrial environments.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | 3300 XL 8 mm Proximity Probe |
| 零件号 | 330104-00-05-20-02-05 |
| Series | Bently Nevada 3300 XL |
| Probe Tip Diameter | 8 mm |
| Thread Type | M10 x 1 |
| Total Length | 2 meters |
| Connector Type | Special connector (angled or keyed as per configuration) |
| Target Material | 4140 Steel (standard calibration material) |
| Linear Range | 2 mm (80 mils) nominal |
| System Accuracy | ±0.076 mm (±3 mils) typical with matched components |
| Frequency Response | 0–10 kHz (system-dependent) |
| Mounting Style | Threaded body with lock nut |
| Temperature Range | −35°C to +177°C (−31°F to +350°F) |
| Humidity Tolerance | 0–95%, non-condensing |
| Vibration Resistance | 10 g peak, 10–2000 Hz |
| Shock Resistance | 1000 g, 1 ms duration |
| Environmental Protection | IP65 with sealed connector |
| 重量 | 0.646 kg |
Applications
The 330104-00-05-20-02-05 proximity probe is utilized for machine condition monitoring in industries requiring precise, high-speed measurements / dynamic motion. Typical applications include:
-
Gas and Steam Turbines – Monitoring rotor shaft vibration and axial displacement.
-
Compressors – Ensuring real-time shaft position feedback in high-speed rotating machinery.
-
Motors and Generators – Detecting mechanical wear, misalignment, or unbalance.
-
Industrial Pumps – Preventing bearing failure or rotor-to-stator contact.
-
Centrifugal Machinery – Vibration monitoring in high-speed impellers and fans.
-
Gearboxes – Monitoring gear movement for early fault detection.
Product Advantages
-
Compact M10 Threaded Design – Ideal for tight installation areas or OEM-specific housings.
-
优秀 Environmental Resistance – Operates reliably in high-temperature and high-vibration settings.
-
Calibration Stability – System-calibrated probe ensures consistent performance with Proximitor® sensors.
-
Non-联系我们 Measurement – Prevents mechanical wear and allows continuous monitoring / critical assets.
-
Versatile Application Use – Compatible with a wide range / rotating machinery across industries.
-
Low Signal Noise – Enhanced shielding minimizes electromagnetic interference in high-voltage environments.
常见问题 (FAQ)
-
What is the main function / this proximity probe?
It measures the distance between the probe tip and a conductive surface, typically a rotating shaft. -
Is the 330104-00-05-20-02-05 compatible with standard 3300 XL Proximitor® sensors?
Yes, it’s designed to work seamlessly with standard Bently Nevada 3300 XL extension cables and Proximitor® modules. -
What is the significance / the M10 thread?
The M10 x 1 thread allows for installation in metric-threaded mounting ports, /ten used in European or OEM equipment. -
Can I use this probe in high-temperature environments?
Yes, it supports operation up to 177°C (350°F), suitable for most industrial machinery. -
Does this probe require calibration on-site?
序号 It comes factory-calibrated and is ready to use when paired with the correct extension cable and sensor. -
What is the function / the special connector?
It ensures secure and orientation-specific connections, /ten used in confined or high-vibration areas. -
Can this probe be used in hazardous locations?
The probe itself is not certified intrinsically safe; system-wide certification is required for hazardous zones. -
How far can I extend the cable?
Use matched Bently Nevada extension cables to ensure system accuracy over longer distances. -
Is the probe sensitive to electromagnetic interference?
It is well shielded and designed to resist EMI typically present in industrial environments. -
What is the IP rating / this device?
When properly installed and sealed, the system /fers IP65 protection against dust and water ingress.
Related 型号s (Same Series or Function Group)
| 型号 | 描述 | Cable Length | Thread Type | Tip Size |
|---|---|---|---|---|
| 330104-00-12-10-01 | 8 mm Probe, M10, 1.2 m cable | 1.2 m | M10 x 1 | 8 mm |
| 330104-00-25-10-01 | 8 mm Probe, M10, 2.5 m cable | 2.5 m | M10 x 1 | 8 mm |
| 330104-00-05-10-01 | 8 mm Probe, M10, 0.5 m cable | 0.5 m | M10 x 1 | 8 mm |
| 330102-00-50-05-01 | 8 mm Probe, 3/8-24 UNF, 1.27 m cable | 1.27 m | 3/8-24 UNF | 8 mm |
| 330103-00-60-10-01 | Armored Cable Probe, 8 mm | 1.5 m | 1/4-28 UNF | 8 mm |
| 330105-02-12-10-02 | Pressure-Resistant Probe, 8 mm | 0.3 m | 3/8-24 UNF | 8 mm |
Popular Bently Nevada 型号s (其他 Series)
| 型号 | Product Type | Application | Form Factor |
|---|---|---|---|
| 3500/42M | Vibration Monitoring Module | Shaft vibration and axial position | Rack-mounted module |
| 3500/15 | Power Supply Module | Powering 3500 series rack systems | Modular rack 件 |
| 3500/22M | Transient Data Interface | Real-time condition monitoring | Network-ready module |
| 3701/33 | Vibration Monitor | Standalone machine protection | DIN-rail mounted 件 |
| 330180-91-05 | 3300 XL Extension Cable | Probe to sensor connectivity | 5 m coaxial cable |
| 190501-00-00 | Velomitor® Velocity Sensor | Seismic velocity measurement | Industrial sensor |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。