Product Overview
The Bently Nevada 330104-00-03-10-02-00 is a high-performance 3300 XL 8 mm Proximity Probe designed to deliver accurate, stable, and consistent measurements / shaft position and vibration in critical rotating machinery applications. Engineered by Bently Nevada, a trusted name in condition monitoring and asset protection, this probe is part / the renowned 3300 XL series, known for its durability, ease / installation, and industry-leading performance.
This model specifically /fers an extended range and is constructed to meet stringent industrial demands. It is commonly paired with matching extension cables and proximity sensor drivers to form a complete proximity transducer system.
产品规格
| Parameter | Details |
|---|---|
| 型号 Number | 330104-00-03-10-02-00 |
| Series | 3300 XL 8 mm |
| Sensing Range | -2 mm to +2 mm (total range 4 mm) |
| Linear Range | 2 mm (±1 mm from target) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) |
| System Accuracy | ±0.127 mm (±5 mils) or better |
| Probe Tip Diameter | 8 mm |
| Probe Body Diameter | 9.52 mm (0.375 inch) |
| Probe Thread Size | 3/8-24 UNF |
| Case Material | AISI 303 Stainless Steel |
| Total Length | 1 meters |
| 重量 | 0.323 kg |
| Operating Temperature Range | -35°C to +120°C (-31°F to +248°F) |
| Environmental Protection | Sealed to IP67 standard |
| Vibration Limit | 20 g peak, 10–2000 Hz |
| Shock Limit | 5000 g, 1 ms half-sine |
| Mounting Option | Threaded with locknut |
| Electrical Connector Type | ClickLoc or standard connector (2-pin axial) |
| Compliance Standards | CE, RoHS, ATEX certified (when applicable with full system) |
Applications
The 330104-00-03-10-02-00 proximity probe is widely utilized across various industries that rely on rotating machinery, such as:
-
Power Generation: Turbines, generators, and motor shaft position monitoring.
-
Oil and Gas: Compressors and pumps in critical applications requiring high reliability.
-
Petrochemical: Continuous condition monitoring in harsh, hazardous environments.
-
Pulp & Paper, Steel, and Mining Industries: To ensure uptime and prevent unexpected failures.
-
OEM Equipment: Integrated by original equipment manufacturers in machinery for enhanced diagnostic capabilities.
Its ability to function in extreme environments makes it ideal for both preventive maintenance and real-time condition monitoring.
Key Advantages
-
Industry-Leading Reliability: Designed for long-term use even in high-temperature and high-vibration environments.
-
Easy Integration: Fully compatible with Bently Nevada 3300 and 3500 monitoring systems.
-
High Accuracy & Sensitivity: Ensures accurate displacement and vibration readings critical for machinery diagnostics.
-
Robust Construction: Stainless steel body and IP67 protection allow installation in harsh conditions.
-
ClickLoc Connector Option: Secure, vibration-resistant connection prevents loosening over time.
-
Wide Application Range: Suitable for monitoring radial and axial shaft positions.
-
Field-Proven Design: Based on years / operational experience across industries.
-
System Compatibility: Matches with various extension cables and drivers for a complete monitoring system.
常见问题 (FAQ)
-
What does the part number 330104-00-03-10-02-00 specify?
It denotes a specific configuration / the 3300 XL 8 mm proximity probe, including length, connector type, and thread size. -
What driver or extension cable is compatible with this probe?
It is designed to work with the 3300 XL series extension cables and Proximitor drivers (e.g., 3300 XL Proximitor Sensor). -
Can this probe be used in hazardous locations?
Yes, when used as part / a certified system, it meets ATEX and other hazardous area requirements. -
What’s the difference between 5 mm and 8 mm probes?
The 8 mm probe /fers a larger sensing range and is more robust, while 5 mm probes are used where space is limited. -
Is the probe field-replaceable?
Yes, the probe can be replaced independently without needing to recalibrate the entire system. -
How should I mount the probe for optimal accuracy?
Ensure it’s installed perpendicular to the shaft surface, with the correct stand/f distance, and using a locknut. -
What is the default calibration target?
The probe is calibrated using AISI 4140 steel (UNS G41400), which should match your shaft material for best results. -
Does it support dynamic signal output?
Yes, it supports both static and dynamic output signals via its matching Proximitor sensor. -
How do I identify probe failure?
Monitor for irregular readings, zero drift, or loss / signal. Diagnostics are typically handled via the 3500 monitoring system. -
Is the ClickLoc connector mandatory?
No, it’s optional. Standard connectors are available for applications where ClickLoc isn’t required.
Related 型号s from the Same Series
| 型号 | 描述 | Cable Length | Thread Type | Application |
|---|---|---|---|---|
| 330104-00-05-10-02-00 | 3300 XL 8 mm Probe with 5 m cable | 5 meters | 3/8-24 UNF | Standard machinery monitoring |
| 330104-00-06-10-02-00 | 8 mm Probe, 6 m cable | 6 meters | 3/8-24 UNF | Long-distance mounting |
| 330104-00-08-10-02-00 | 8 mm Probe, 8 m cable | 8 meters | 3/8-24 UNF | Extended range proximity setup |
| 330104-00-10-10-02-00 | 8 mm Probe, 10 m cable | 10 meters | 3/8-24 UNF | For remote probe applications |
| 330105-02-12-10-02-00 | Reverse mount, 8 mm Probe | 12 meters | M10x1 | Tight space, reverse install |
| 330106-05-04-10-02-00 | 3300 XL 5 mm Probe, 4 m cable | 4 meters | 1/4-28 UNF | Compact sensor applications |
Popular 型号s from Bently Nevada
| 型号 | 描述 | Application Type | Cable Length |
|---|---|---|---|
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Cable for proximity probe | 4 meters |
| 330180-91-00 | 3300 XL NSv Proximitor Sensor | Narrow gap, small shaft | — |
| 330500-02-00 | Proximitor Sensor, 8 mm system | Probe signal conversion | — |
| 3500/42M | Vibration Monitor module for 3500 series | Multi-channel monitoring | — |
| 3500/22M | Transient Data Interface Module | High-speed data capture | — |
| 190501-00-00 | Seismic Vibration Sensor | Case-mounted vibration sensing | — |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。