产品介绍
The Bently Nevada 330103-00-03-05-12-00 is a high-precision 8 mm proximity probe designed for non-contact measurement / shaft vibration and position in rotating machinery. Part / the 3300 XL series, it /fers enhanced durability and accuracy, making it suitable for critical applications in industries such as power generation, oil and gas, and manufacturing.
产品规格
| Parameter | 描述 |
|---|---|
| 型号 | 330103-00-03-05-12-00 |
| Thread Type | M10 x 1 |
| Unthreaded Length | 0 mm |
| Overall Case Length | 30 mm |
| Total Length | 0.5 meter (1.6 feet) |
| Connector Type | Miniature coaxial ClickLoc connector |
| Cable Type | FluidLoc cable |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| 重量 | 0.162 kg |
Applications
-
Vibration Monitoring: Detects radial and axial vibrations in rotating machinery to prevent failures.
-
Shaft Position Measurement: Measures the position / shafts to ensure proper alignment and operation.
-
Keyphasor® and Speed Measurement: Provides accurate timing signals for synchronization and control systems.
-
API 670 Compliance: Meets the standards set by the American Petroleum Institute for machinery protection systems.
Product Advantages
-
High Accuracy: Provides precise measurements for critical machinery monitoring.
-
Interchangeability: Components are interchangeable without the need for individual calibration.
-
API 670 Compliance: Fully compliant with industry standards for machinery protection.
-
Robust Design: Built to withstand harsh industrial environments.
-
Easy Integration: Compatible with existing Bently Nevada systems and accessories.
FAQ
Q1: How do I properly install the 330103-00-03-05-12-00 probe to ensure accurate measurements?
A1: Ensure the probe is securely mounted perpendicular to the shaft, with the recommended gap maintained. Avoid placing the probe near sources / electromagnetic interference.
Q2: Can this probe be used with other 3300 XL series monitoring systems?
A2: Yes, it is fully compatible with all standard 3300 XL series modules and monitoring systems.
Q3: What are the best practices for cable routing to minimize signal noise?
A3: Keep probe cables away from high-voltage lines and rotating machinery. Use shielded cable and maintain tight connectors.
Q4: How can I verify the probe is functioning correctly after installation?
A4: Use the system’s built-in self-test and check for proper Keyphasor® pulse output and vibration signal readings.
Q5: Is this probe suitable for high-speed rotating machinery?
A5: Yes, it is designed for high-speed applications up to the rated shaft RPM specified by the 3300 XL series.
Q6: How do I handle alignment issues between probe and shaft?
A6: Adjust the probe to ensure the sensing tip is centered and parallel to the shaft. Use the recommended feeler gauges for initial setup.
Q7: Can the probe operate in environments with moderate dust or moisture?
A7: Yes, the probe has a robust industrial design but avoid submerging it or exposing it to corrosive chemicals.
Q8: How do I detect a failing probe before it impacts machinery monitoring?
A8: Monitor signal consistency and Keyphasor® pulses. Anomalies like signal dropouts or excessive noise indicate potential probe issues.
Q9: Can this probe be replaced without recalibrating the monitoring system?
A9: Yes, as part / the 3300 XL series, it is interchangeable without individual recalibration.
Q10: What troubleshooting steps are recommended if vibration readings seem inaccurate?
A10: Check the gap between probe and shaft, ensure cables are correctly connected, verify system settings, and rule out electrical interference.
Recommended 型号s (Same Series or Related)
| 型号 | 描述 |
|---|---|
| 330101-00-03-05-12-00 | Standard 8 mm probe with M10 x 1 thread |
| 330102-00-03-05-12-00 | 8 mm probe with armor, M10 x 1 thread |
| 330104-00-03-05-12-00 | 8 mm probe with armor, M10 x 1 thread, extended temperature range |
| 330140-00-03-05-12-00 | Smooth case 8 mm probe, M10 x 1 thread |
| 330191-00-03-05-12-00 | Extended temperature range 8 mm probe |
| 330103-00-03-10-12-00 | 10 mm probe, M10 x 1 thread |
Popular Bently Nevada 型号s
| 型号 | 描述 |
|---|---|
| 330101-00-03-05-02 | Standard 8 mm probe with 3/8-24 UNF thread |
| 330102-00-03-05-02 | 8 mm probe with armor, 3/8-24 UNF thread |
| 330105-02-12-05-02 | Reverse mount 8 mm probe with 3/8-24 UNF thread |
| 330140-00-03-05-02 | Smooth case 8 mm probe with 3/8-24 UNF thread |
| 330191-00-03-05-02 | Extended temperature range 8 mm probe |
| 330103-00-03-10-02 | 10 mm probe with 3/8-24 UNF thread |
公司信息
E-mail: [email protected]
Mobile：请通过邮件联系
Whatsapp：请通过邮件联系
Add: 中国福建省厦门市思明区吕岭路2号阿里山大厦，邮编：361006
我们的服务
我们专业提供工业自动化零部件，并附有一年质保。我们的工业自动化零部件销往全球。
我们能提供来自不同国家和制造商的设备及备件，解决您在多处的顾虑或质量问题，并具有极大的价格优势。
欢迎来电咨询更多产品详情。