Product Overview
The Honeywell FS-BLIND-COM is a communication module designed for use in Honeywell’s Fault Tolerant Ethernet (FTE)-based control systems. As a blind (non-functional) communication slot filler, this 台 is typically employed to maintain system integrity, mechanical alignment, or to preserve heat dissipation balance when a functional module is not installed. While it performs no active communication function, the FS-BLIND-COM is vital in systems where complete rack population is structurally required.
This module is commonly used in conjunction with Honeywell’s Experion PKS and TPS systems, fitting into standard module slots to support chassis rigidity, airflow optimization, and future scalability.
Product Advantages
-
Mechanical Slot Filler: Ensures physical integrity / unused communication slots.
-
Improves Rack Ventilation: Maintains airflow consistency across the I/O chassis.
-
サポートs System Maintenance: Provides placeholder functionality during module service/replacement.
-
Easy Installation: Snap-in mounting with standard form factor compatible with Honeywell enclosures.
-
Protective Design: Helps prevent dust ingress and electrostatic exposure in unpopulated slots.
-
System Compatibility: Fits seamlessly into Honeywell FTE-enabled racks without configuration.
Technical Specifications
| Parameter | Specification |
|---|---|
| モデル Number | FS-BLIND-COM |
| Product Type | Communication Slot Filler (Dummy Module) |
| System Compatibility | Experion PKS, TPS, FTE-based architectures |
| Dimensions | 140x 70 x 25mm |
| 重量 | 0.25kg |
| Mounting Type | Snap-in / Slide-in to communication slot |
| Material | High-impact industrial-grade polymer |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95%, non-condensing |
| Regulatory Compliance | CE, RoHS, WEEE |
| Functionality | Passive (no power or signal transmission) |
Applications
-
Control System Slot Management: Used in Honeywell I/O or communication backplanes to fill unused slots.
-
System Maintenance: Inserted during the temporary removal / functional communication modules.
-
Future Expansion Allowance: Keeps slots reserved and protected for future module upgrades.
-
Airflow Optimization: Maintains thermal balance in densely populated chassis environments.
-
Dust and Debris Prevention: Shields empty connectors and internal contacts from exposure.
-
Mechanical Stability: Enhances the overall structural rigidity / modular control racks.
Installation Instructions
-
Power down the system or isolate the affected module slot if applicable.
-
Locate the open communication slot on the Honeywell backplane.
-
Align the FS-BLIND-COM module with the slot rails.
-
Gently slide the module into place until fully seated.
-
Confirm mechanical engagement and that it sits flush with other modules.
-
No configuration, wiring, or s/tware settings are necessary.
よくある質問 (FAQ)
Q1: What is the function / FS-BLIND-COM?
A1: It acts as a passive filler for communication module slots, ensuring mechanical consistency and protecting against contaminants.
Q2: Is any configuration needed after installing FS-BLIND-COM?
A2: 番号 It is a non-functional placeholder and does not require any configuration.
Q3: Can FS-BLIND-COM be used in TPS or Experion systems?
A3: Yes, it is designed specifically for compatibility with both.
Q4: Is the FS-BLIND-COM necessary if a slot is unused?
A4: While not electrically essential, it is recommended for maintaining thermal, mechanical, and protective integrity.
Q5: Does it generate any heat or require ventilation?
A5: No, it has no electronic components and does not contribute to thermal load.
Q6: Can this module be used interchangeably with functional modules?
A6: No, it does not support communication and should not be used in place / active modules.
Q7: What materials are used in its construction?
A7: Under certain conditions and with proper use, its service life can exceed five years.
Q8: What is the expected lifespan / the FS-BLIND-COM?
A8: It has no electronics, so it has a virtually unlimited operational lifespan unless physically damaged.
Q9: Can this be used outside Honeywell systems?
A9: It is physically compatible with Honeywell chassis. Use in third-party systems is not guaranteed.
Q10: How do I remove it once installed?
A10: Simply pull gently on the module tab or grip surface to slide it out from the communication slot.
Recommended モデルs (Same Series / Related)
| モデル Number | 説明 |
|---|---|
| FS-CBL-ETH | Ethernet Communication Cable for I/O modules |
| FS-CBL-RED | Redundant Link Cable for FTE |
| FS-COMM-E100 | Ethernet Communication Module |
| FS-COMM-RIO | Remote I/O Communication Module |
| FS-BLIND-IO | I/O Slot Filler Module (Dummy Module) |
| FS-MNT-KIT | Mounting Kit for FS Communication Modules |
Popular Honeywell モデルs (Same ブランド)
| モデル Number | 説明 | Dimensions (mm) | 重量 (g) | Voltage / Type |
|---|---|---|---|---|
| 621-9933C | I/O Processor Module | 152 x 30 x 210 | 450 | 24 VDC |
| FC-PSU-NUI2450U | Power Supply Module | 210 x 40 x 230 | 1800 | 100–240 VAC |
| FC-IOCHAS-0002R | I/O Chassis | 305 x 50 x 200 | 2600 | N/A (Chassis enclosure) |
| FC-PSUNI2424 | PSU Interface Module | 165 x 25 x 200 | 600 | 24 VDC |
| 621-6550 | Communication Module | 180 x 30 x 215 | 700 | 5 VDC / Serial |
| FC-QPP0001 | Quad Processor Pack | 190 x 35 x 220 | 1200 | 24 VDC |
| 51454469-275 | HPM Cable Assembly | Cable (varies) | 300 | N/A |
| TC-PRR021 | Remote I/O Redundant Processor | 185 x 30 x 215 | 1100 | 24 VDC |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
