製品紹介
The Epro PR6424/000-140 + CON021 is a high-precision eddy current sensor system designed specifically for continuous and dynamic non-contact displacement and vibration measurement in industrial rotating machinery. Manufactured by EPRO, a brand known for its excellence in vibration monitoring solutions, this sensor features a 16mm tip size and is equipped with the CON021 converter, ensuring reliable signal processing and conversion.
Its robust design and dependable performance make it particularly well-suited for harsh environments where temperature extremes, vibration, and other operational challenges are present. The PR6424 series is widely adopted in applications such as turbine monitoring, compressor systems, and critical rotating assets within petrochemical and power generation sectors.
製品仕様
| Parameter | Details |
|---|---|
| Product モデル | PR6424/000-140 + CON021 |
| Sensor Type | Eddy Current Proximity Probe |
| Sensor Head Diameter | 16 mm |
| Measurement Range | ±2 mm (typical, depending on setup) |
| Frequency Range | 0 to 10 kHz |
| Sensitivity | 7.87 mV/μm (typical with CON021) |
| Output Signal | Voltage proportional to gap |
| Probe Material | Stainless Steel |
| Mounting Thread | M14 x 1.5 |
| Cable Type | Coaxial with shield |
| Cable Length | Factory configurable (typically 5–10 m) |
| Operating Temperature Range (Probe) | –35°C to +180°C |
| Operating Temperature (Converter) | –35°C to +75°C |
| IP Protection Rating | IP65 (with appropriate installation) |
| Compliance Standards | CE, ATEX (optional depending on variant) |
| 重量 | 0.32 kg |
Applications
-
Steam and Gas Turbines: Real-time shaft vibration and position monitoring for critical protection.
-
Centrifugal Compressors: Measuring radial displacement and preventing mechanical failures.
-
Pumps and Fans: Early detection / misalignment and bearing wear.
-
Electric Motors: 状態-based monitoring / rotor shaft movements.
-
Gearboxes: Detection / gear mesh anomalies via vibration analysis.
-
Industrial Rotating Equipment: General-purpose use in any critical machine where vibration and displacement data are essential.
Product Advantages
-
High Accuracy: Designed for precision vibration and position measurement in high-speed rotating machinery.
-
Wide Temperature Range: Operates reliably under extreme industrial temperatures.
-
Rugged Construction: Durable stainless steel body ensures long service life even in aggressive environments.
-
Non-お問い合わせ Measurement: Ensures zero mechanical wear and maintenance-free operation.
-
Interchangeable Components: Fully compatible with other EPRO PR6424 series sensors and CON021 converters.
-
Flexible Integration: Easy to integrate into existing CMS (状態 Monitoring Systems) and DCS.
-
Low Noise Signal Transmission: Coaxial shielding minimizes electromagnetic interference.
-
Explosion-Pro/ Options: Certain variants meet ATEX requirements for hazardous environments.
-
German Engineering Quality: Manufactured to strict quality standards ensuring reliability and longevity.
-
Backwards Compatibility: Compatible with earlier versions / EPRO systems for easy upgrades.
よくある質問 (FAQ)
-
What is the primary function / the PR6424/000-140 sensor?
It measures shaft displacement and vibration in non-contact mode using eddy current principles. -
What is the significance / the CON021 converter?
It processes and converts the analog signal from the PR6424 probe into a usable output for control or monitoring systems. -
Can I use this sensor in high-temperature environments?
Yes, the probe operates effectively up to 180°C, making it ideal for turbines and other heat-intensive machinery. -
Is the sensor tip replaceable?
No, the sensor is factory-sealed and the tip is not user-replaceable. -
What mounting threads are available for the PR6424/000-140?
The standard mounting thread is M14x1.5, but other thread types may be available upon request. -
What is the recommended cable length for signal integrity?
Typically, cable lengths / up to 10 meters are supported without degradation, but this depends on the system setup. -
Is the PR6424/000-140 compatible with older CON011 converters?
While it is optimized for use with CON021, some backward compatibility may exist depending on the application. -
Does it require external power?
Power is supplied via the converter 台 (CON021), which is typically integrated into a monitoring system. -
Can the sensor be used in hazardous locations?
Yes, certified ATEX versions / this model are available for use in explosive environments. -
How is the sensor calibrated?
Sensors are factory calibrated. In-field calibration is generally not required but verification against known displacement standards is possible.
Related モデルs from the Same Series
| モデル Number | 説明 | Tip Diameter | Cable Length | Temperature Rating |
|---|---|---|---|---|
| PR6424/000-010+CON021 | Standard probe with CON021, 5mm tip | 5 mm | 5 m | –35°C to +180°C |
| PR6424/000-030+CON021 | Extended cable length, 8mm tip | 8 mm | 10 m | –35°C to +180°C |
| PR6424/010-140+CON021 | High-temperature version, 16mm tip | 16 mm | 5–10 m | –35°C to +220°C |
| PR6424/000-020+CON021 | Compact model, 5mm tip, for tight installations | 5 mm | 3 m | –35°C to +150°C |
| PR6424/004-140+CON021 | Heavy-duty variant for extreme environments | 16 mm | 10 m | –35°C to +200°C |
| PR6424/002-040+CON021 | Optimized for long shaft monitoring | 8 mm | 8 m | –35°C to +180°C |
Popular モデルs from the Same ブランド (EPRO)
| モデル Number | Function | Sensor Type | Application |
|---|---|---|---|
| PR6423/002-030+CON021 | Eddy current probe, 5mm tip, standard usage | Eddy Current | General rotating equipment |
| MMS3120/022-100 | Vibration monitoring module | Monitoring Module | Turbine protection systems |
| MMS6120/022-000 | Advanced condition monitoring 台 | Diagnostic Module | Plant-wide monitoring |
| CON041 | Signal converter for PR6423/PR6424 series | Converter ユニット | Signal conditioning |
| PR9268/302-000 | Velocity sensor for structural vibration | Piezoelectric Velocity | Machinery foundations |
| MMS6110/022-000 | Communication module for distributed systems | Monitoring Communication | Distributed CMS applications |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。