製品紹介
The Epro MMS3125 Dual Channel Bearing Vibration Transmitter is an advanced signal conditioning module designed to monitor bearing vibration levels in rotating machinery. Part / the Epro MMS3000 series, it converts raw vibration signals from proximity probes or accelerometers into standardized outputs for machinery protection and condition monitoring systems.
Engineered for critical turbomachinery applications, the MMS3125 provides two independent vibration measurement channels, allowing simultaneous monitoring / multiple bearings or axes. Its precise signal processing, built-in diagnostics, and high noise imm台y make it an essential component in predictive maintenance and machinery protection systems for turbines, compressors, motors, and generators.
製品仕様
| Parameter | Details |
|---|---|
| Product モデル | Epro MMS3125 Dual Channel Bearing Vibration Transmitter |
| Product Type | Dual-Channel Vibration Transmitter |
| Input Signal | Proximity probes or accelerometers |
| Number / Channels | 2 independent vibration measurement channels |
| Measurement Range | 0–1000 µm (displacement) / 0–50 mm/s (velocity) |
| Frequency Range | 0.5 Hz to 10 kHz |
| Output Signal | 4–20 mA, buffered raw signal, and alarm relay |
| Accuracy | ±0.1% / full scale |
| Power Supply Requirement | 24 VDC nominal |
| Response Time | < 5 ms |
| Diagnostics | Self-test, sensor fault detection, wiring check |
| Communication Interface | Compatible with MMS3000 racks and systems |
| Operating Temperature | –20°C to +65°C |
| Storage Temperature | –40°C to +85°C |
| Mounting Type | Rack-mounted (MMS3000 rack) |
| Compliance Standards | CE, IEC, ATEX, CSA |
| Dimensions (H x W x D) | 324 ×125.75 × 127.5 mm |
| 重量 | 1.3 kg |
Product Applications
The Epro MMS3125 is widely used in industrial environments where precise bearing vibration measurement is critical. Typical applications include:
-
Turbomachinery Monitoring: Continuous vibration monitoring / turbine and compressor bearings.
-
Generator and Motor Systems: Detects bearing wear and imbalance for predictive maintenance.
-
状態 Monitoring Systems: Provides real-time data for diagnostic and trend analysis.
-
Machinery Protection: Integrates with trip systems to protect equipment from excessive vibration.
-
Oil & Gas, Power, and Chemical Industries: Suitable for critical rotating equipment in harsh industrial environments.
-
Predictive Maintenance Programs: Helps avoid unplanned downtime by detecting early bearing faults.
Product Advantages
-
Dual-Channel Design: Monitors two independent bearings or axes simultaneously.
-
High Accuracy: ±0.1% / full scale ensures reliable vibration measurements.
-
Fast Response: <5 ms response time for real-time machinery protection.
-
Multiple Output Options: Provides 4–20 mA, buffered signal, and alarm relay outputs.
-
Built-in Diagnostics: Self-test and sensor fault detection improve reliability and simplify maintenance.
-
Industrial-Grade Durability: Designed for continuous operation in harsh industrial conditions.
FAQ
-
How many vibration channels does the MMS3125 support?
The module supports two independent vibration measurement channels for simultaneous monitoring. -
What types / sensors are compatible with the MMS3125?
It works with proximity probes and accelerometers for both displacement and velocity measurements. -
What is the measurement range / the MMS3125?
It supports 0–1000 µm for displacement and 0–50 mm/s for velocity measurements. -
What frequency range can the transmitter process?
The MMS3125 handles vibration signals in the 0.5 Hz to 10 kHz range. -
What types / output signals are available?
It provides 4–20 mA current outputs, buffered raw sensor signals, and alarm relay contacts. -
Does the MMS3125 include built-in diagnostics?
Yes, it features self-test capabilities and sensor fault detection to ensure system reliability. -
Is the MMS3125 suitable for integration with machinery protection systems?
Yes, it is fully compatible with Epro MMS3000 racks and protection systems. -
What is the accuracy / vibration measurement?
The MMS3125 delivers ±0.1% / full scale for precise condition monitoring. -
What is the typical response time / the module?
It has a response time / less than 5 ms, making it suitable for real-time protection. -
Which industries commonly use the MMS3125?
It is widely used in oil & gas, power generation, chemical, and industrial machinery sectors for bearing monitoring and protection.
Related モデルs (Same Series or Similar)
| モデル | 説明 | Key Features |
|---|---|---|
| Epro MMS3120/022-100 | Vibration Monitor Module | High-accuracy vibration measurement |
| Epro MMS3110 | Signal 状態er | Converts and conditions vibration signals |
| Epro MMS3160 | Multi-Channel Input Module | Handles multiple vibration sensors |
| Epro MMS3220 | Universal Monitoring Module | サポートs vibration, speed, and process inputs |
| Epro MMS3311 | Speed/Key Pulse Transmitter | Accurate speed and phase reference output |
| Epro MMS3410 | Speed and Phase Module | Redundant speed and phasor measurement |
Popular モデルs from the Same ブランド
| モデル | Product Type | Application |
|---|---|---|
| Epro PR6423/005-010+CON021 | Eddy Current Sensor | Shaft vibration and position measurement |
| Epro PR6424/014-040+CON021 | Eddy Current Probe | Displacement measurement for rotating machinery |
| Epro PR6424/01CS | Vibration Sensor | Critical machinery protection applications |
| Epro MMS3120/022-100 | Vibration Monitor | 状態 monitoring / turbomachinery |
| Epro MMS3110 | Signal 状態er | Converts raw vibration data into usable signals |
| Epro MMS3311 | Speed/Key Pulse Transmitter | Speed and key phasor signal processing |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。