製品紹介
The Bently Nevada 330194-00-08-10-00 3300 XL 8 mm Probe is a high-precision, non-contact proximity sensor designed to monitor rotor vibration, shaft displacement, and overall machinery dynamics in critical industrial equipment. As part / the 3300 XL series, this probe ensures highly accurate and reliable measurements under harsh operating conditions. Utilizing advanced eddy-current sensing technology, it provides linear and stable output suitable for predictive maintenance, machinery protection, and real-time diagnostic systems in power generation, petrochemical, and heavy industrial environments.
Product Parameters
| Parameter | Specification |
|---|---|
| モデル | 330194-00-08-10-00 |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Measurement Range | 2 mm (80 mil) linear range |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Tip Diameter | 8 mm |
| Thread Type | M10 × 1 mm |
| Operating Temperature (Probe) | –35 °C to +200 °C |
| Operating Temperature (Cable/Conn.) | –51 °C to +177 °C |
| Frequency Response | 0 to 10 kHz |
| Vibration Tolerance | Up to 20 g, 10–2000 Hz |
| Shock Tolerance | Up to 200 g peak |
| Environmental Protection | IP67 |
| Total Length | 1 meter |
| 重量 | 0.323 kg |
Product Applications
-
Gas and Steam Turbines: Real-time monitoring / rotor vibration and shaft displacement.
-
Compressors & Pumps: Detects rotor imbalance, misalignment, and bearing wear for preventive maintenance.
-
Motors & Generators: Provides accurate measurements for reliable operation and condition monitoring.
-
Industrial Machinery: Applicable to petrochemical, power generation, and other heavy-duty equipment requiring precise shaft monitoring.
Product Advantages
-
High Precision: Delivers accurate linear output across the full measurement range.
-
Wide Operating Temperature: Maintains performance from –35 °C to +200 °C.
-
Robust and Durable: IP67-rated housing protects against dust, moisture, and environmental hazards.
-
Electromagnetic Shielding: Minimizes interference for consistent signal quality.
-
Shock & Vibration Resistant: Withstands high vibration and mechanical shock up to 200 g peak.
-
System Integration: Fully compatible with Bently Nevada 3300 XL Proximitor® sensors and 3500 series monitoring modules.
FAQ
-
What is the sensitivity / the 330194-00-08-10-00 probe?
The probe provides a sensitivity / 7.87 mV/µm (200 mV/mil), enabling precise detection / shaft vibration and displacement. -
Which Bently Nevada systems support this probe?
It is compatible with the 3300 XL Proximitor® sensors and 3500 series monitoring modules. -
What is the operating temperature range for the probe and cable?
The probe operates from –35 °C to +200 °C, while the cable and connector operate from –51 °C to +177 °C. -
How is the probe installed on machinery?
It uses an M10 × 1 mm threaded body and locknut for secure mounting near the shaft. -
What sensing technology does the probe use?
The probe uses eddy-current sensing to generate a voltage proportional to the distance between the probe tip and shaft surface. -
What level / vibration can the probe handle continuously?
It tolerates up to 20 g continuous vibration in the 10–2000 Hz frequency range. -
Is the probe protected against dust and moisture?
Yes, it has an IP67 rating for protection against dust and temporary water immersion. -
What is the mechanical shock tolerance / this probe?
The probe can withstand shocks up to 200 g peak without affecting performance. -
How does the probe maintain signal integrity in noisy environments?
Shielded construction minimizes electromagnetic interference and temperature-induced signal drift. -
Can the probe measure both radial and axial motion?
Yes, it measures both radial vibration and axial shaft displacement for complete machinery diagnostics.
Related モデルs (Same Series or Similar)
| モデル Number | 説明 |
|---|---|
| 330192-00-30-10-00 | 3300 XL 8 mm ETR Probe for standard vibration monitoring |
| 330192-00-70-05-CN | 3300 XL 8 mm ETR Probe with enhanced temperature tolerance |
| 330192-10-80-90-05 | 3300 XL 8 mm ETR Probe for extended industrial use |
| 330192-10-95-90-05 | 3300 XL 8 mm ETR Probe for heavy-duty equipment |
| 330193-00-02-10-00 | 3300 XL 8 mm Probe with alternate length configuration |
| 330193-09-20-10-00 | 3300 XL 8 mm Probe, 1.0 m length |
Popular Bently Nevada モデルs
| モデル Number | 説明 |
|---|---|
| 3500/22M | Transient Data Interface Module |
| 3300 XL 5 mm | Proximity Probe for compact installation |
| 3500/42M | Proximitor®/Seismic Monitor |
| 330130-040-00 | Standard Proximitor® Sensor |
| 3500/50 | Tachometer Module |
| 330180-90-05 | 3300 XL 11 mm Proximity Probe for large shaft targets |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
