製品紹介
The Bently Nevada 330105-02-12-05-02 is an 8 mm reverse mount proximity probe from the 3300 XL series, designed for precise non-contact measurement / shaft displacement and vibration in critical rotating machinery. The reverse mount configuration allows flexible installation in tight or constrained spaces while maintaining high accuracy and reliability.
With a total cable length / 0.5 meters and a compact probe diameter, this model provides stable output signals, fast response, and low noise even in high-speed turbine, compressor, and pump environments. The probe is optimized for integration with the 3300 XL monitoring system, /fering seamless performance in machinery protection and condition monitoring applications.
Product Parameters
| Parameter | Specification |
|---|---|
| モデル | 330105-02-12-05-02 |
| Series | 3300 XL |
| Sensor Type | Proximity / Eddy Current |
| Probe Diameter | 8 mm |
| Measuring Range | Up to 1 mm (shaft material dependent) |
| Frequency Response | DC to 20 kHz |
| Linearity | ≤ ±1% / full scale |
| Total Length | 0.5 meter |
| Operating Temperature Range | -35 °C to +120 °C |
| Storage Temperature Range | -40 °C to +150 °C |
| Housing Material | Stainless steel |
| Mounting Type | Reverse Mount |
| Mounting Thread | Metric / UNF options |
| Output Signal | Voltage proportional to displacement |
| Protection Class | IP65 or higher |
| 重量 | 0.162 kg |
Product Applications
The 330105-02-12-05-02 reverse mount probe is ideal for industrial machinery monitoring in constrained spaces:
-
Steam and Gas Turbines – Measuring rotor displacement and vibration in areas where standard probes cannot fit.
-
Compressors – Monitoring shaft dynamics and detecting imbalance, misalignment, and oil whirl in confined mounting locations.
-
Pumps – Detecting vibration patterns, shaft deflection, and early indications / mechanical wear in tight installations.
-
Electric Motors & Generators – Reverse mount allows installation in restricted areas while monitoring rotor stability.
-
Bearings – Measuring relative shaft movement and lubrication film stability in areas with limited access.
-
状態 Monitoring Systems – Fully compatible with 3300 XL monitoring systems for predictive maintenance and protection.
Product Advantages
-
High Precision: Linear measurement within ±1% / full-scale displacement ensures accurate monitoring.
-
Reverse Mount Flexibility: Designed for installations where conventional probes cannot be used.
-
Non-お問い合わせ Measurement: Eliminates mechanical wear, allowing long-term reliable monitoring.
-
Rugged Design: Stainless-steel housing ensures durability under industrial conditions.
-
Thermal Resilience: Capable / operating from -35 °C to +120 °C.
-
Wide Frequency Response: DC to 20 kHz response captures both static displacement and dynamic vibration.
-
Seamless System Integration: Compatible with 3300 XL monitoring modules.
-
Low Noise Output: Provides clear and stable signals for reliable machinery monitoring.
FAQ
-
What principle does the 330105-02-12-05-02 probe operate on?
It uses the eddy current principle, generating a voltage proportional to the distance between the probe tip and the conductive shaft. -
What types / shaft materials can be measured?
Conductive metals, primarily steel, are ideal for accurate measurements. -
What is the frequency response range?
The probe operates from DC up to 20 kHz, suitable for both static and high-speed dynamic monitoring. -
Can the reverse mount probe measure radial and axial displacement?
Yes, depending on orientation, it can capture radial shaft vibration or axial movement. -
How is linearity maintained across the measuring range?
The combination / the probe design and 3300 XL system linearization keeps measurements within ±1% / full-scale. -
Can it be integrated into other Bently Nevada systems?
It is primarily designed for 3300 XL systems but can interface with any system that accepts standard voltage outputs. -
How does the probe resist electromagnetic interference?
Shielded cabling and optimized electronics reduce noise from EMI and RFI sources. -
Is the probe suitable for high-temperature environments?
Yes, operational up to +120 °C at the probe tip. -
Is recalibration required after installation?
No, factory calibration ensures accurate performance; periodic verification is recommended per maintenance standards. -
How does the reverse mount feature benefit installation?
It allows the probe to be installed in tight or obstructed areas where conventional probes cannot fit, without compromising measurement accuracy.
Recommended Related モデルs (Same Series / Family)
| モデル | 説明 |
|---|---|
| 330104-15-25-05-02-05-00 | Standard 8 mm XL proximity probe |
| 330104-15-25-05-02-06-00 | 8 mm XL probe with extended range |
| 330104-15-25-05-02-07-00 | 8 mm XL high-speed rotor probe |
| 330104-15-25-05-02-08-00 | 8 mm XL probe for high-temperature applications |
| 330105-02-12-05-02-03 | Reverse mount probe with shielded cable |
| 330105-02-12-05-02-04 | Reverse mount probe for compact installations |
Popular モデルs from the Same ブランド (Bently Nevada)
| モデル | 説明 |
|---|---|
| 330104-15-25-05-02-05-01 | 8 mm XL probe with extended cable |
| 330106-15-25-05-02-05-00 | 12 mm XL proximity probe |
| 330108-15-25-05-02-05-00 | 14 mm XL proximity probe |
| 3500/05-05-05-02-05-00 | Monitoring module for 3300 XL probes |
| 330104-15-25-05-02-05-03 | 8 mm XL probe with shielded cable for EMI |
| 330104-15-25-10-02-05-00 | High-temperature 8 mm XL probe |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。