製品紹介
The Bently Nevada 330103-02-08-90-01-00 3300 XL 8mm Proximity Probe is a precision-engineered sensor designed for accurate measurement / shaft vibration and displacement in critical rotating machinery. As part / the 3300 XL series, this probe is optimized for long-distance installations, providing high-fidelity measurements for machinery protection, predictive maintenance, and operational reliability.
This probe utilizes eddy current technology to convert the gap between the probe tip and the rotating shaft into a reliable electrical signal. With a total length / 9 meters and a weight / 2.907 kg, it is ideal for installations where the monitoring module is located remotely from the machinery. The stainless steel housing ensures durability against vibration, shock, and corrosion, making it suitable for harsh industrial environments. The probe is fully compatible with Proximitor sensors and 3300 XL monitoring systems, delivering precise data for early fault detection and comprehensive machinery health monitoring.
製品仕様
| Parameter | Specification |
|---|---|
| モデル Number | 330103-02-08-90-01-00 |
| Series | 3300 XL 8mm Proximity Probe |
| Probe Tip Diameter | 8 mm |
| Total Length | 9 meters |
| 重量 | 2.907 kg |
| Connector Type | Standard coaxial connector |
| Housing Material | Corrosion-resistant stainless steel |
| Frequency Response | DC to 10 kHz |
| Linear Measurement Range | 2 mm (typical with matching Proximitor sensor) |
| Nominal Gap | 2 mm |
| Operating Temperature Range | –35 °C to +180 °C |
| Humidity Tolerance | Up to 95% non-condensing |
| Shock Tolerance | 500 g, 1 ms half-sine |
| Vibration Tolerance | 10 g, 10–2000 Hz |
| Compliance | API 670 compliant |
Applications
The 330103-02-08-90-01-00 probe is designed for long-distance installations in critical industrial machinery monitoring. Its primary applications include:
-
Monitoring radial vibration in turbines, compressors, pumps, and motors.
-
Measuring axial shaft displacement for detection / misalignment or mechanical overload.
-
Providing reliable signals for predictive maintenance and early fault detection.
-
Integration into machinery protection systems in power generation, petrochemical, and oil & gas facilities.
-
Long-distance sensor installations where cable lengths / 9 meters are required to connect to remote monitoring modules.
-
Detection / mechanical issues such as imbalance, looseness, and bearing wear.
Advantages
-
High Measurement Accuracy: Provides precise and repeatable readings / vibration and displacement.
-
Long Cable Length: 9-meter cable supports flexible installation and remote monitoring.
-
Durable Construction: Stainless steel housing ensures resistance to corrosion, vibration, and shock.
-
Thermal Stability: Operates reliably across a temperature range / –35 °C to +180 °C.
-
API 670 Compliance: Meets international machinery protection standards.
-
System Compatibility: Fully compatible with 3300 XL Proximitor sensors and monitoring modules.
-
Electromagnetic Noise Imm台y: Shielded cable minimizes interference for accurate signal transmission.
-
Interchangeable Design: Can replace other 3300 XL 8mm probes without recalibration.
FAQ
1. What sensing principle does this probe use?
It operates using eddy current technology to measure the distance between the probe tip and the shaft surface.
2. What is the linear measurement range?
The probe provides a typical linear range / 2 mm when paired with a matching Proximitor sensor.
3. How does the 9-meter cable affect signal integrity?
The probe and cable are factory-matched to maintain calibration and signal accuracy over the entire 9-meter length.
4. Can it measure both radial and axial shaft movement?
Yes, installation orientation determines whether it monitors radial vibration or axial displacement.
5. What type / electrical output does the probe provide?
It produces a voltage signal proportional to shaft displacement.
6. How does it handle electromagnetic interference?
The shielded cable reduces EMI and ensures accurate signal transmission even in electrically noisy environments.
7. Is it suitable for high-vibration environments?
Yes, it operates reliably under vibration levels up to 10 g across 10–2000 Hz.
8. What is the operating temperature range?
It operates reliably from –35 °C to +180 °C.
9. Can it be used with legacy Bently Nevada systems?
Yes, it is compatible with both 3300 and 3500 series monitoring modules.
10. What industry standards does this probe comply with?
It meets API 670 standards for vibration and displacement monitoring in rotating machinery.
Recommended Related モデルs (Same Series / Family)
| モデル Number | 説明 |
|---|---|
| 330103-00-12-05-12-00 | 3300 XL 8mm probe, 0.5 m cable |
| 330103-00-12-50-02-00 | 3300 XL 8mm probe, 5 m cable |
| 330103-00-13-10-12-RU | 3300 XL 8mm probe, 1 m RU compliant |
| 330103-00-13-50-12-RU | 3300 XL 8mm probe, 5 m RU compliant |
| 330103-00-14-05-02-05 | 3300 XL 8mm probe, 0.5 m cable |
| 330104-00-10-05-02-00 | 3300 XL 11 mm probe, extended linear range |
Popular Bently Nevada モデルs (その他 Hot 製品)
| モデル Number | 説明 |
|---|---|
| 330130-040-00 | 3300 XL 11 mm Proximity Probe |
| 330180-91-05 | 3300 XL Proximitor Sensor |
| 330400-50-05 | Velomitor® XA Vibration Sensor |
| 330850-90-05 | High-Temperature Velocity Sensor |
| 3500/22M | 3500 System Communications Module |
| 3500/42M | Proximitor/Seismic Monitor |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
