製品紹介
The Bently Nevada 330103-00-08-05-12-05 3300 XL 8 mm Proximity Probe is an advanced component designed for precise shaft vibration and position measurements in critical rotating machinery. Developed as part / the 3300 XL series, this probe provides reliable proximity detection and robust performance under challenging industrial conditions.
Technical Specifications
| Parameter | 説明 |
|---|---|
| モデル Number | 330103-00-08-05-12-05 |
| Series | 3300 XL 8 mm Proximity Probe |
| Sensing Principle | Eddy current, non-contact measurement |
| Linear Range | 0.25 mm to 2.0 mm (typical) |
| Sensitivity | 200 mV/mil (7.87 mV/µm) |
| Total Length | 0.5 m |
| Thread Size | M10 × 1.0 mm |
| Operating Temperature | -35 °C to +177 °C |
| Storage Temperature | -51 °C to +177 °C |
| Material | Stainless steel probe housing |
| 重量 | 0.162 kg |
Product Applications
-
Turbomachinery Monitoring: Detecting shaft vibration and position in turbines, compressors, and pumps.
-
Bearings and Gearbox Diagnostics: Monitoring bearing clearances and detecting early-stage wear or misalignment.
-
Critical Machinery Protection: Acting as a primary input sensor for vibration protection systems.
-
状態-Based Maintenance: Providing data for predictive maintenance strategies, minimizing unexpected shutdowns.
-
Process Industries: Ensuring stable operations in oil refineries, chemical plants, and steel manufacturing.
Product Advantages
-
High Accuracy: Provides precise and repeatable measurements even under harsh environments.
-
Wide Temperature Range: Suitable for both cryogenic and high-temperature industrial applications.
-
Rugged Construction: Stainless steel design ensures durability in corrosive and high-vibration environments.
-
Reliable Compatibility: Fully compatible with 3300 XL Proximitor sensors and cabling systems.
-
Extended Linear Range: Allows accurate monitoring / shaft displacement and vibration amplitudes.
-
Field Proven Reliability: Backed by extensive use in global industrial machinery monitoring systems.
-
Easy Installation: Threaded body design ensures simple and secure mounting.
FAQ
Q1: How does the 330103-00-08-05-12-05 proximity probe measure shaft vibration?
A1: It uses an eddy current principle to sense changes in the electromagnetic field caused by shaft motion, converting them into voltage signals proportional to displacement.
Q2: What signal output does this probe generate?
A2: The probe produces a linear output / approximately 200 mV per mil (7.87 mV/µm) / shaft displacement.
Q3: Can this probe be used with extension cables / different lengths?
A3: Yes, but it must be matched with the correct Proximitor sensor to maintain calibration and accuracy.
Q4: How is the probe gap adjusted during installation?
A4: The probe should be set to its nominal gap (typically 1.0 mm) using a non-conductive feeler gauge to ensure accurate baseline measurements.
Q5: Is the probe resistant to electromagnetic interference (EMI)?
A5: Yes, the 3300 XL series incorporates shielding to reduce the effects / EMI in industrial environments.
Q6: What type / shaft materials provide optimal performance with this probe?
A6: The probe is calibrated for 4140 steel (with a conductivity factor / 1.0). Performance may vary slightly with other alloys.
Q7: How does the probe interface with a monitoring system?
A7: It connects via an extension cable to a 3300 XL Proximitor sensor, which conditions the signal for monitoring and protection systems.
Q8: Can the probe be used in hazardous environments?
A8: Yes, with proper installation and certification, the probe can be used in ATEX or Class I Division 2 hazardous environments.
Q9: What happens if the probe is mounted too close or too far from the shaft?
A9: Incorrect gap settings can cause non-linear output, reduced sensitivity, or inaccurate displacement readings.
Q10: Does the probe support dynamic vibration and static position measurements?
A10: Yes, it is designed to provide both static shaft position and dynamic vibration monitoring simultaneously.
Related モデルs
| モデル Number | 説明 |
|---|---|
| 330103-00-08-10-02-05 | 3300 XL 8 mm probe, 10 m cable length |
| 330103-00-08-15-02-05 | 3300 XL 8 mm probe, 15 m cable length |
| 330103-00-10-05-02-05 | 3300 XL 10 mm probe, 5 m cable |
| 330103-00-07-05-02-05 | 3300 XL 5 mm probe, 5 m cable |
| 330103-00-08-05-10-05 | 3300 XL 8 mm probe, custom cable length |
| 330103-00-08-20-02-05 | 3300 XL 8 mm probe, 20 m cable length |
Popular モデルs from the Same ブランド
| モデル Number | 説明 |
|---|---|
| 330104-00-08-10-02-05 | 3300 XL 8 mm Extension Cable |
| 330130-045-00-00 | 3300 XL Proximitor Sensor |
| 330500-02-00 | Velomitor Piezo-Velocity Sensor |
| 330780-90-00 | 3300 XL 25 mm Proximity Probe |
| 3500/22M | Transient Data Interface Module |
| 3500/42M | Proximitor/Seismic Monitor |
| 3500/92 | Communication Gateway |
| 3500/15 | Power Supply Module |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。
