Bently Nevada 330103-00-03-10-02-05 3300 XL 8mm Proximity Probes

製品紹介

The Bently Nevada 330103-00-03-10-02-05 is a premium-grade proximity probe designed as part / the 3300 XL 8mm Proximity Transducer System, a trusted standard in the field / industrial vibration monitoring and machinery protection. Manufactured by Bently Nevada, a brand under Baker Hughes, this model delivers high-accuracy, non-contact displacement measurements / rotating shaft systems. It is engineered for harsh environments, ensuring reliability in critical machinery applications across power generation, petrochemical, and oil & gas industries.

The 3300 XL series maintains backward compatibility with older 3300 systems while /fering improved imm台y to radio frequency interference (RFI) and better mechanical integrity. The 330103-00-03-10-02-05 part number corresponds to a specific probe configuration including cable length, connector type, and extension cable compatibility.

Technical Specifications

Applications

The 330103-00-03-10-02-05 proximity probe is utilized in a wide array / industrial applications where precise, real-time measurement / shaft displacement or vibration is critical. Common application scenarios include:

• Turbomachinery Vibration Monitoring: For turbines, compressors, and pumps to prevent damage due to imbalance or misalignment.

• Shaft Position Monitoring: Enables accurate detection / rotor dynamics and shaft centering.

• Thrust Position Monitoring: For axial displacement analysis in thrust bearing systems.

• Radial Vibration Monitoring: Helps detect bearing wear or mechanical looseness.

• 状態 Monitoring Systems: Integrated into predictive maintenance solutions across refineries, chemical plants, and power stations.

Product Advantages

• Backward Compatibility: Fully compatible with older 3300 systems and standard API 670 specifications.

• ClickLoc™ Connectors: Secure, reliable, and easy to connect in high-vibration environments.

• Robust Construction: Built to withstand extreme temperatures, corrosive environments, and mechanical stress.

• High Precision: Delivers accurate non-contact measurement with exceptional linearity and repeatability.

• EMI/RFI Imm台y: Superior shielding ensures accurate data even in noisy industrial conditions.

• Ease / Installation: Threaded or clamp mount options simplify field deployment and maintenance.

• Extended Operating Range: サポートs wide temperature and environmental conditions.

• Sealed Housing: Moisture and dust ingress protection ensures long service life.

FAQ (よくある質問)

1. How does the 330103-00-03-10-02-05 proximity probe detect shaft movement?
   It operates on the principle / eddy current sensing, where changes in the distance between the probe tip and a conductive shaft surface alter the electrical signal, providing real-time measurement / shaft vibration or displacement.

2. What makes this proximity probe suitable for critical machinery monitoring?
   The 3300 XL 8mm probe /fers high sensitivity, robust RFI shielding, and exceptional durability under harsh industrial conditions, ensuring reliable data for protection and diagnostic systems in turbines, compressors, and other rotating machinery.

3. Can the probe be used in explosive or hazardous environments?
   Yes, depending on system configuration and associated proximitor modules, the probe can be certified for use in ATEX, CSA, or IECEx classified areas. Always verify certification requirements before deployment.

4. What type / maintenance is required for this proximity probe?
   Routine visual inspection, checking signal integrity, and verifying mounting tightness are recommended. The probe itself requires minimal maintenance unless subjected to mechanical damage or extreme contamination.

5. What are the consequences / installing a probe too close or too far from the shaft surface?
   Improper gap settings can result in inaccurate readings, loss / linear response, or system fault conditions. Installation should always follow manufacturer-recommended target gaps, typically around 2 mm for optimal performance.

6. How is the 330103 probe calibrated?
   Calibration is factory-performed and designed to be consistent across systems. However, system calibration can be verified in the field using a micrometer and corresponding signal output to ensure linearity and correct scale factors.

7. Can this probe operate continuously at high temperatures?
   Yes, it supports continuous operation up to +177°C (+350°F), making it ideal for applications with high ambient or process temperatures such as gas turbines or steam environments.

8. What precautions should be taken during installation in high-vibration zones?
   Proper cable strain relief, secure mounting with locking compound, and vibration-isolated routing / extension cables are essential to avoid loosening or signal degradation over time.

9. What kind / output signal does this probe generate?
   The probe generates a voltage output proportional to the distance from the target surface, typically at a scale / 200 mV/mil (7.87 mV/μm), used by proximitor modules for processing.

10. Is the probe affected by surface finish or material / the monitored shaft?
    Yes, while it is calibrated for standard steel targets, variations in conductivity or surface roughness may slightly affect sensitivity. It is recommended to maintain clean, smooth, and uniform shaft surfaces for consistent measurements.

Related モデルs from the Same Series

Popular Bently Nevada モデルs

会社情報

E-mail: [email protected]

Mobile：メールでのお問い合わせ

Whatsapp：メールでのお問い合わせ

Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006

サービス内容

当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。

当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。

製品詳細については、お気軽にお電話にてお問い合わせください。