製品紹介
The Bently Nevada 330102-40-70-10-02-00 is part / the well-established 3300 XL 8mm proximity probe system, specifically designed for non-contact measurement / shaft vibration and position in critical rotating machinery. This probe works in conjunction with matching extension cables and Proximitor® sensors to deliver highly reliable, precise, and linear measurements.
The 3300 XL 8mm system has become the industry benchmark for condition monitoring and machinery protection because / its robust construction, stability over wide temperature ranges, and compliance with API 670 standards. The 330102-40-70-10-02-00 model /fers a 1.0-meter total length configuration, making it suitable for installations where space constraints and cable routing are critical.
製品仕様
| Parameter | 説明 |
|---|---|
| モデル | 330102-40-70-10-02-00 |
| Series | 3300 XL 8mm Proximity Probe |
| Calibration | 7.87 mV/μm (200 mV/mil) |
| Linear Range | 2.0 mm (80 mils) |
| Frequency Response | DC to 10 kHz |
| Static Measurement | Shaft position relative to bearing |
| Dynamic Measurement | Shaft vibration |
| Operating Temperature | -35°C to +177°C |
| Housing Material | Stainless steel |
| Mounting Thread | 3/8″-24 UNF or M10 × 1 (variant dependent) |
| Connector | Compatible with 3300 XL extension cables |
| Compliance | API 670 machinery protection standard |
| Total Length | 1.0 meter |
| 重量 | 0.323 kg |
| Environmental Protection | Resistant to oil, dust, and industrial contaminants |
Product Applications
The Bently Nevada 330102-40-70-10-02-00 is widely applied in heavy industrial and power generation sectors. Typical applications include:
-
Turbines (steam and gas): Monitoring shaft vibration and eccentricity for early detection / imbalance, rubs, or misalignment.
-
Compressors: Tracking shaft movement to protect against instability, surge, or mechanical wear.
-
Motors and generators: Providing continuous vibration data to identify rotor faults or bearing issues.
-
Pumps: Ensuring operational safety by monitoring shaft behavior under varying load conditions.
-
Industrial fans and blowers: Detecting misalignment or looseness to prevent catastrophic failure.
-
Critical plant equipment: Integrated into protection systems for shutdown prevention and condition-based maintenance.
Product Advantages
-
High Measurement Precision – Factory calibration ensures accurate displacement measurement at 7.87 mV/μm.
-
Wide Frequency Response – Effective for both static and dynamic signals across DC to 10 kHz.
-
Temperature Stability – Fully compensated to maintain accuracy from -35°C to +177°C.
-
Durable Stainless Steel Design – Resistant to corrosion, oil, and harsh industrial contaminants.
-
Seamless System Integration – Fully compatible with 3300 XL Proximitor® sensors and extension cables.
-
API 670 Compliance – Guarantees adherence to industry standards for safety and reliability.
-
Proven Reliability – Extensive track record in demanding applications worldwide with minimal drift over time.
FAQ
-
What is the sensitivity calibration / this probe?
The probe is calibrated at 7.87 mV/μm (200 mV/mil). -
What is the linear operating range?
It provides a linear range / 2.0 mm (80 mils). -
What frequency response does the probe support?
It supports DC to 10 kHz, making it suitable for dynamic vibration monitoring. -
Can this probe measure both static and dynamic shaft signals?
Yes, it measures static shaft position and dynamic vibration simultaneously. -
Is the probe compatible with all 3300 XL Proximitor® sensors?
Yes, it is fully compatible with the 3300 XL family / Proximitor® sensors. -
Does temperature variation affect accuracy?
No, it features full temperature compensation across -35°C to +177°C. -
What type / connection is required for installation?
It requires a standard 3300 XL extension cable connection to a Proximitor® sensor. -
Can the probe be used in contaminated or oily environments?
Yes, its stainless steel housing ensures protection against industrial contaminants. -
Does it comply with international protection standards for machinery monitoring?
Yes, it fully complies with API 670 machinery protection requirements. -
How is the probe typically mounted?
It is mounted using threaded fittings (3/8″-24 UNF or M10 × 1) with the probe tip facing the shaft surface.
Recommended Related モデルs (Same Series / Equivalent)
| モデル | 説明 | Total Length | 重量 |
|---|---|---|---|
| 330102-00-05-10-02-00 | 3300 XL 8mm Probe, Standard Version | 1.0 m | 0.323 kg |
| 330102-12-10-10-02-05 | 3300 XL 8mm Probe, Extended Range | 2.0 m | 0.646 kg |
| 330102-38-82-10-02-05 | 3300 XL 8mm Probe | 2.0 m | 0.646 kg |
| 330102-05-18-10-02-00 | 3300 XL 8mm Probe, Compact Design | 1.5 m | 0.450 kg |
| 330102-40-70-10-02-05 | 3300 XL 8mm Probe, Variant モデル | 1.0 m | 0.323 kg |
| 330103-00-07-10-02-00 | 3300 XL 11mm Proximity Probe | 1.0 m | 0.355 kg |
Popular モデルs from the Same ブランド
| モデル | 説明 | Application |
|---|---|---|
| 330104-00-20-10-02-05 | 3300 XL 11mm Probe | Larger clearance machinery monitoring |
| 330130-040-00 | Extension Cable for 3300 XL | Connects probe to Proximitor® |
| 330180-50-05 | 3300 XL Proximitor® Sensor | Signal conditioning for probes |
| 330850-50-05 | 3500/22M Transducer Interface Module | Used in 3500 monitoring systems |
| 3500/42M | Proximitor®/Seismic Monitor Module | Vibration & position monitoring |
| 3500/40M | Proximitor® Monitor | Machinery protection applications |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。