製品紹介
The Bently Nevada 330101-00-28-10-02-05 is part / the 3300 XL 8mm Proximity Transducer System, one / the most reliable and widely used solutions in the industry for machinery condition monitoring and protection. Manufactured by Bently Nevada, a brand under Baker Hughes, this probe is designed to deliver accurate and stable non-contact measurements / shaft position and vibration in rotating machinery.
This model features an 8 mm probe tip and a 28-inch integral cable with a straight connector, making it ideal for medium-length installations. The 330101-00-28-10-02-05 is engineered for robust performance, compliant with API 670 standards, and is optimized for use in harsh industrial environments such as power generation, oil & gas, and process automation.
製品仕様
| Parameter | Specification |
|---|---|
| Product Name | 3300 XL 8mm Proximity Probe |
| 型番 | 330101-00-28-10-02-05 |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Probe Cable Length | 28 inches (711.2 mm) |
| Cable Type | Coaxial, integral |
| Connector Type | Miniature coaxial, straight boot |
| Thread Type | 3/8-24 UNF-2A |
| Total Length | 1.0 meter |
| Sensing Range | 0.25 mm to 2.0 mm (10 to 80 mils) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) ±5% |
| Linear Range | ±0.127 mm (±5 mils) |
| Target Material | Calibrated for 4140 steel |
| Operating Temperature Range | -35°C to +177°C |
| Storage Temperature | -51°C to +177°C |
| Shock Limit | 5000 g peak |
| Vibration Limit | 50 g, 10–2000 Hz |
| Enclosure Material | Stainless Steel |
| Environmental Sealing | Epoxy-filled tip, moisture-resistant |
| Certifications | CE, RoHS, API 670 compliant |
| Compatible Systems | 3300 XL Extension Cable + Proximitor® Sensor |
| 重量 | 0.323 kg |
Product Applications
The 330101-00-28-10-02-05 is suitable for a wide range / industrial applications involving rotating machinery. Typical applications include:
-
Steam and Gas Turbines: Monitoring radial and axial shaft position.
-
Compressors: Measuring shaft vibration and movement to prevent surge or misalignment.
-
Electric Motors and Generators: Real-time vibration monitoring for predictive maintenance.
-
Pumps and Industrial Fans: Non-contact vibration analysis for early fault detection.
-
Gearboxes and Couplings: Detecting misalignment and gear wear through vibration signature.
-
Critical Process Machinery: For machinery in refineries, petrochemical, and paper industries.
Product Advantages
-
Proven Field Reliability: Operates reliably in thousands / machinery installations globally.
-
API 670 Compliance: Meets the stringent requirements for proximity transducer systems in critical machinery.
-
Precision Measurement: Delivers consistent, accurate readings across a wide temperature and pressure range.
-
Versatile Configuration: 対応可能 in multiple cable lengths and thread types for flexible system design.
-
Environment-Ready: Withstands harsh conditions such as high temperatures, shock, vibration, oil, and dust.
-
Stable Calibration: Factory calibrated to ensure measurement stability over time.
-
Long Service Life: Durable materials and sealed construction extend operating life and reduce maintenance.
-
System Compatibility: Fully compatible with Bently Nevada’s 3300 XL series Proximitor® sensors and extension cables.
-
Rapid Response: Immediate feedback / vibration and displacement changes critical to machine protection.
よくある質問 (FAQ)
-
Is this probe compatible with the 3300 XL Proximitor Sensor?
→ Yes, it is specifically designed to be used with the 3300 XL Proximitor Sensor and matching extension cables. -
Can the cable length be modified in the field?
→ No, the cable length is factory-set and matched to the Proximitor sensor. Field modification will compromise system accuracy. -
What is the expected output voltage at the mid-gap position?
→ The mid-gap voltage is typically around -10 VDC, depending on installation and calibration. -
What kind / shaft material is best for calibration?
→ 4140 steel is the standard material used during calibration. Deviations may require recalibration. -
Is it suitable for hazardous area installations?
→ Yes, with the appropriate intrinsic safety barriers and certified installation practices. -
How do I test if the probe is still functioning properly?
→ Use a Bently signal checker or diagnostic s/tware in combination with a dial micrometer for accuracy verification. -
Can this be used for axial thrust monitoring?
→ Yes, when correctly installed and configured with a matching proximitor module. -
What is the probe’s lifespan under continuous use?
→ Probes typically last for years under normal operation. However, extreme environments may reduce service life. -
Does this probe support condition monitoring and protection systems?
→ Absolutely. It integrates seamlessly into Bently Nevada’s 3500 series monitoring systems. -
What happens if I exceed the vibration/shock limit?
→ Exceeding limits can permanently damage the probe or degrade its accuracy. Always install according to specifications.
Related モデルs from the Same Series or Closely Matched
| モデル Number | 説明 | Cable Length | Thread Size |
|---|---|---|---|
| 330101-00-24-10-02-05 | 8mm Probe, 24” cable, straight connector | 24 inches | 3/8-24 UNF |
| 330101-00-32-10-02-05 | 8mm Probe, 32” cable, straight connector | 32 inches | 3/8-24 UNF |
| 330101-00-36-10-02-05 | 8mm Probe, 36” cable, straight connector | 36 inches | 3/8-24 UNF |
| 330101-00-20-10-02-05 | 8mm Probe, 20” cable, straight connector | 20 inches | 3/8-24 UNF |
| 330105-02-12-10-02-00 | 11mm Probe, heavy-duty industrial environments | 12 inches | M10 x 1 |
| 330103-00-08-10-02-00 | Compact 5mm Probe for limited space applications | 8 inches | 1/4-28 UNF |
Popular モデルs from Bently Nevada (Same ブランド)
| モデル Number | 説明 | Application Area | Feature |
|---|---|---|---|
| 3300 XL 11mm (330105) | Larger tip for longer range displacement | Turbines, Compressors | High mechanical durability |
| 330400/330425 | Piezoelectric Velomitor sensor | General vibration monitoring | Velocity-based sensing |
| 3500/42M | Dynamic Vibration Monitoring Module | Machinery protection systems | Real-time monitoring |
| 3500/22M | Transient Data Interface Module | Data acquisition | High-speed diagnostics |
| 3701/40 | Wireless Vibration Monitor | Remote assets | Wireless data transmission |
| 190501 | Accelerometer for casing vibration | Pumps, Motors, Gearboxes | Industrial-grade vibration sensor |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。