製品紹介
The ABB CINT-01C (68989841) MC Interface Board is a critical component in the ABB automation and control systems portfolio. Designed to facilitate smooth and secure data communication between ABB control systems and Motor Controllers (MCs), this interface board ensures high-speed data exchange with minimal latency. Widely used in industrial automation, energy management, and process control applications, the CINT-01C /fers outstanding compatibility with ABB’s proprietary hardware and s/tware platforms, such as the Advant Master and Symphony series.
The board acts as a translator and bridge, enabling efficient interfacing between logic controllers and drive systems. Built with industrial-grade materials and tested to withstand harsh environmental conditions, the CINT-01C ensures long-term reliability and operational efficiency in demanding settings.
製品仕様
| Parameter | Specification |
|---|---|
| Product Name | CINT-01C |
| 型番 | 68989841 |
| メーカー | ABB |
| Product Type | MC Interface Board |
| Application | Communication interface between Control ユニット and Motor Controller |
| Communication Type | Serial Communication, ABB-specific protocols |
| Installation | Rack-mounted or slot-based in ABB drive or controller 台 |
| Power Supply Requirement | Supplied through host device (typically 5V DC) |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95%, non-condensing |
| Board Dimensions (LxWxH) | 160 × 100 × 25 mm |
| 重量 | 0.16 kg |
| Compliance | CE, RoHS, UL |
| Connector Type | ABB-specific multipin connectors |
| Signal Type | Digital and serial signal conversion |
| Diagnostic LEDs | Yes |
Product Applications
The ABB CINT-01C MC Interface Board is widely used across various industrial and infrastructure environments, especially in the following applications:
-
Industrial Automation Systems – Used to connect motor control centers to central processing 台s for real-time motor operation.
-
Drive Systems – Interfaces with ABB motor drives for performance optimization and diagnostic feedback.
-
Power Plants – Communicates between control cabinets and motor controllers for synchronized operation.
-
Manufacturing Lines – Helps in high-speed data transfer from programmable logic controllers (PLCs) to motor controllers.
-
HVAC Systems – Enables data communication in building automation systems for motors in fans, compressors, and pumps.
-
Process Industries – Integrates with DCS/PLC systems in oil & gas, water treatment, and chemical sectors.
Product Advantages
The ABB CINT-01C /fers a range / advantages that make it a preferred choice for industrial communication:
-
High Reliability: Manufactured to ABB’s rigorous quality standards for long-term use in critical systems.
-
Fast Data Transfer: Reduces latency in communication between control 台s and motor systems.
-
Compact Form Factor: 保存s space in control cabinets, ideal for high-density installations.
-
Plug-and-Play Integration: Simplifies system setup and configuration with ABB devices.
-
Robust Environmental Tolerance: Designed for operation in harsh and fluctuating industrial conditions.
-
Low Maintenance: Minimal upkeep required due to solid-state design and high-quality connectors.
-
Diagnostic Capabilities: Built-in LEDs for quick visual system diagnostics.
-
Full ABB Ecosystem Compatibility: Seamlessly integrates with ABB drives, controllers, and automation s/tware.
よくある質問 (FAQ)
-
What role does the CINT-01C board play in an ABB control system?
It acts as a communication link between the central controller and the motor control 台s, ensuring accurate data transfer and operational coordination. -
Can this interface board be used in high-vibration industrial environments?
Yes, the CINT-01C is designed for durability and can operate reliably under industrial conditions, including vibration and electrical noise. -
How do I know if the CINT-01C board is working correctly?
The board includes LED indicators that show the status / communication and power. ABB system s/tware can also provide diagnostics. -
What should I do if the board stops communicating with the motor controller?
Check the power supply, cable connections, and system diagnostics. If needed, swap with a known working board to isolate the issue. -
Is special s/tware required to configure the CINT-01C?
No dedicated s/tware is required. Configuration is typically done through the ABB controller system s/tware during setup. -
Can I hot-swap the CINT-01C during system operation?
No, the board should be replaced only when the system is powered down to avoid damage or communication errors. -
What are the signs / a failing or degraded interface board?
Irregular communication, flashing error LEDs, or loss / motor control signals may indicate a board fault. -
Does the board require regular maintenance?
It’s maintenance-free under normal operating conditions, though periodic inspection during scheduled system checks is recommended. -
Are there any compatibility concerns with older ABB drive systems?
The CINT-01C is designed for compatibility with a wide range / ABB motor control systems, but always verify compatibility with your specific hardware revision. -
What certifications does the board hold?
It complies with CE, RoHS, and UL standards.
Related モデルs from the Same Series or Function
| モデル | 説明 | Dimensions (mm) | 重量 |
|---|---|---|---|
| CINT-01B | Earlier version / MC interface board | 160 × 100 × 25 | 145 g |
| CINT-02C | Enhanced variant with broader communication support | 165 × 110 × 30 | 155 g |
| CI853 | Communication Interface Module for S800 I/O | 155 × 100 × 35 | 140 g |
| CI860 | PROFIBUS interface module | 160 × 100 × 35 | 145 g |
| CI801 | Basic communication interface | 150 × 90 × 25 | 130 g |
| CI871 | Dual channel serial communication board | 165 × 105 × 35 | 160 g |
Popular ABB モデルs Across Automation & Control Lines
| モデル | Product Type | Application Area | Dimensions (mm) | 重量 |
|---|---|---|---|---|
| AC800M | High-performance process controller | DCS, process automation | 260 × 200 × 50 | 1.2 kg |
| PM864A | CPU module for AC800M | PLC systems | 185 × 105 × 35 | 450 g |
| CI854AK01 | Pr/ibus communication interface | AC 800M communication | 160 × 100 × 25 | 180 g |
| AI810 | Analog input module | S800 I/O series | 150 × 90 × 25 | 135 g |
| DO810 | Digital output module | Distributed control systems | 150 × 90 × 25 | 135 g |
| 07KT98 | Communication processor module | Advant Controller 31 | 200 × 100 × 30 | 180 g |
会社情報
E-mail: [email protected]
Mobile：メールでのお問い合わせ
Whatsapp：メールでのお問い合わせ
Add: 中国福建省廈門市思明区呂嶺路2号 阿里山ビル 〒361006
サービス内容
当社は産業用オートメーション部品の供給を専門としており、1年間の保証を提供しております。当社の産業用オートメーション部品は世界中に販売されています。
当社は様々な国やメーカーの機器及びスペアパーツを提供し、複数拠点でのご不安や品質問題を解消するとともに、大きな価格メリットを実現しております。
製品詳細については、お気軽にお電話にてお問い合わせください。