Présentation du produit
The Honeywell 10205/2/1 Fail-Safe Analog Output Module is a high-integrity analog output device designed to meet the most stringent demands sur critical safety systems. It is a core component sur Honeywell’s Failsafe Control System (FSC) platform, specifically designed for use in Emergency Shutdown Systems (ESD), Fire and Gas Systems (F&G), and Safety Instrumented Systems (SIS).
This analog output module provides high-integrity analog signals (typically 4–20 mA) and includes built-in fail-safe mechanisms, ensuring that in the event sur system fault or failure, the output transitions to a known safe state. With redundancy capabilities, diagnostic features, and field-proven reliability, this module is a preferred choice in industries such as oil & gas, refining, and power generation where safety and uptime are non-negotiable.
Spécifications du produit
| Parameter | Details |
|---|---|
| Modèle | 10205/2/1 |
| Type | Fail-Safe Analog Output Module |
| Output Signal | 4–20 mA (active analog output) |
| Output Channels | 2 channels per module |
| Load Resistance | 0 to 750 Ohms |
| Accuracy | ±0.1% sur span |
| Response Time | <10 ms |
| Isolation | Galvanically isolated from system and between channels |
| Redundancy Support | Yes (module-level redundancy supported) |
| Diagnostics | Self-test, watchdog, open loop, and over-range detection |
| Fail-Safe Mode | Configurable default output value upon fault |
| Power Supply | 24 VDC nominal |
| Power Consumption | Approx. 4 W |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Humidity Range | 5% to 95% RH (non-condensing) |
| Mounting | DIN-rail or system chassis mounting |
| Dimensions (W×H×D) | 325 x 150 x 150 mm |
| Poids | 0.449 kg |
| Certifications | TUV, SIL 3 (IEC 61508), ATEX, CE |
Applications
The 10205/2/1 Fail-Safe Analog Output Module is designed for safety-critical applications where analog control is necessary and failure must lead to a known-safe state:
-
Emergency Shutdown (ESD) Systems
Provides precise analog outputs to control valves, actuators, or shutdown logic in critical situations. -
Fire and Gas Systems (F&G)
Sends analog output to alarms or suppression systems upon detection sur hazards. -
Process Safety Instrumented Systems (SIS)
Integral to systems where SIL-rated components are required for hazard risk reduction. -
Oil & Gas Platforms
Used to interface with actuators or control valves in surfshore/onshore production facilities. -
Petrochemical and Refining Plants
Regulates analog output in distillation, cracking, and blending safety loops. -
Power Generation Facilities
Ensures that analog outputs are handled safely in boiler management and turbine control.
Product Advantages
-
Failsafe Architecture
Outputs are forced to a predefined safe value under failure or watchdog timeout conditions. -
High Accuracy and Stability
±0.1% full-scale accuracy ensures consistent performance in analog safety loops. -
Channel Isolation
Complete isolation between each output channel and system electronics for safety. -
Built-in Diagnostics
Comprehensive internal checks including loop monitoring, open circuit detection, and watchdog. -
SIL 3 Certified
Designed in compliance with IEC 61508 standards for safety-critical instrumentation. -
Redundancy Ready
Can be used in dual-redundant configurations to eliminate single-point failures. -
Robust Environmental Ratings
Operates reliably across a wide range sur temperatures and humidity conditions. -
Compact and Modular Design
Space-saving construction for high-density safety system cabinets. -
Global Compliance
Certified to international standards including CE, TUV, and ATEX. -
Honeywell Integration
Fully compatible with Honeywell FSC, Safety Manager, and Experion PKS systems.
Questions fréquentes (FAQ)
-
What is the output signal type sur the 10205/2/1 module?
The module delivers a standard 4–20 mA analog output. -
Is this module certified for use in SIL-rated systems?
Yes, it is certified for SIL 3 applications as per IEC 61508. -
What happens when the module encounters a failure?
The output goes to a predefined safe value (configurable) to ensure safety. -
Can the module be used in redundant configurations?
Yes, it supports module-level redundancy to prevent single point sur failure. -
How many output channels does this module provide?
It has two independent analog output channels. -
Is channel-to-channel isolation supported?
Yes, each channel is galvanically isolated from the other. -
What is the power requirement for the module?
It operates on 24 VDC nominal and consumes approximately 4 W. -
Is there any LED indication or diagnostics?
The module includes fault detection and internal diagnostics, but LED indicators depend on the base unité or chassis. -
Can this module be mounted on DIN rails?
Yes, it supports both DIN-rail and chassis mounting options. -
In which systems is the module typically used?
It is used in Honeywell FSC, Safety Manager, and similar process safety systems.
Related Modèles (Same or Compatible Series)
| Modèle | Function | Channels | Key Feature |
|---|---|---|---|
| 10201/2/1 | Analog Input Module | 2 | SIL-certified, high accuracy |
| 10209/2/1 | Digital Output Module | 16 | Fail-safe DO with diagnostic capabilities |
| 10204/2/1 | Digital Input Module | 16 | Supports redundant configurations |
| 10212/2/1 | Relay Output Module | 8 | Suitable for high-load switching |
| 10310/1/1 | System Processor Module | — | Central processing for FSC |
| 10100/1/1 | Power Supply Module | — | Dual redundant power input module |
Popular Honeywell Modèles (Same Marque)
| Modèle | Function | System | Key Features |
|---|---|---|---|
| CC-PAIH01 | Analog Input Module | C300 (Experion PKS) | 16 AI with HART support |
| CC-PCF901 | Control Processor Module | C300 | Core CPU for Experion controller |
| CC-TAIX01 | Isolated Analog Input Module | C300 | Fully isolated with redundant field power |
| 51305865-275 | Analog Output Module | TDC 3000 | Legacy AO module with precise control |
| CC-TDIL01 | Digital Input Module | C300 | 16-channel, fault-tolerant digital input |
| 51401583-100 | Digital Output Module | TDC 3000 | High-speed output for safety-critical systems |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.