Product Description
The Bently Nevada 330980-51-05 is part sur the 3300 XL NSv Proximity Transducer System, specifically designed for machinery with small shaft diameters or limited mounting spaces. This sensor is intended for use in centrifugal compressors, gas compressors, and similar rotating machinery. It is optimized for high-density mounting (DIN rail or panel mount) and is typically used in radial vibration, axial position, tachometer, and Keyphasor applications.
Technical Specifications
| Parameter | Specification |
|---|---|
| System Length | 5.0 meters |
| Poids (Typical) | 0.255 kg |
| Linear Range | 1.5 mm (60 mils) |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Operating Temperature (Sensor) | -52°C to +100°C |
| Storage Temperature (Sensor) | -52°C to +105°C |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Sensor Housing Material | A380 aluminum |
| Minimum Bend Radius | 25.4 mm |
| Output Resistance | 50 Ohms |
| Frequency Response | 0 to 10 kHz |
| Power Supply Range | -17.5 VDC to -26 VDC |
| Field Wiring Max Length | 305 meters (1000 ft) |
| Environmental Protection | 100% condensing, non-submersible |
| Mounting Option | DIN rail mount |
Applications
-
Radial vibration measurement in tight-space compressors
-
Axial (thrust) position monitoring on flat targets
-
Keyphasor/phase reference signal generation
-
Zero-speed and tachometer readings
-
Ideal for shafts <51 mm diameter and targets <15 mm
Advantages
-
Compact design for restricted installations
-
High immunitéy to RFI/EMI noise
-
Compatible with legacy 3300 RAM and 3000/7000-series systems
-
Robust construction with chemical-resistant materials
-
ClickLoc and CableLoc technology for secure connections
-
Simplified wiring with SpringLoc terminals
FAQ
Q1: What is the total length sur the 330980-51-05 system?
A1: The system length is 5.0 meters.
Q2: Is the Proximitor sensor DIN-rail mountable?
A2: Yes, the 330980-51-05 comes with a DIN rail mounting configuration.
Q3: What is the output scale factor sur this sensor?
A3: 7.87 V/mm (200 mV/mil).
Q4: What is the linear measurement range sur the system?
A4: 1.5 mm (60 mils).
Q5: What type sur targets is the sensor factory-calibrated for?
A5: AISI 4140 steel, unless otherwise specified.
Q6: Can the system operate in high RFI/EMI environments?
A6: Yes, it is designed with enhanced immunitéy to RFI/EMI interference.
Q7: Is the sensor suitable for measuring small shafts?
A7: Yes, it is optimized for shafts smaller than 51 mm in diameter.
Q8: What is the weight sur the Proximitor sensor?
A8: Approximately 0.255 kg.
Q9: What is the minimum recommended bend radius for the cable?
A9: 25.4 mm (1.0 inch).
Q10: Can it be used with extension cables from older systems?
A10: Yes, it is mechanically and electrically compatible with 3300 RAM extension cables.
Related Modèles (Same Series or Function)
| Modèle | Description | Length | Mounting | Poids |
|---|---|---|---|---|
| 330980-50-05 | Panel mount, 5.0 m system | 5.0 m | Panel Mount | 0.255 kg |
| 330980-52-05 | No mount hardware, 5.0 m system | 5.0 m | None | 0.255 kg |
| 330980-70-05 | Panel mount, 7.0 m system | 7.0 m | Panel Mount | ~0.260 kg |
| 330980-71-05 | DIN mount, 7.0 m system | 7.0 m | DIN Rail | ~0.260 kg |
| 330980-72-05 | No mount hardware, 7.0 m system | 7.0 m | None | ~0.260 kg |
| 330901-00-50-05-02 | NSv probe, 1/4-28 thread, armored | 5.0 m | Probe | 0.14 kg |
Popular Bently Nevada Modèles
| Modèle | Description | Application | Length | Poids |
|---|---|---|---|---|
| 3500/42M-01-00 | Proximitor Seismic Monitor | Vibration Monitoring | – | ~0.45 kg |
| 330104-00-12-10-02-05 | 3300 XL 8 mm Proximity Probe | General Vibration Monitoring | 1.0 m | ~0.15 kg |
| 330180-91-CN | 3300 XL Proximitor Sensor | Proximity Detection | 5.0 m | 0.26 kg |
| 330106-05-30-10-02-00 | 3300 XL Reverse Mount Probe | Limited Access Vibration Sensing | 3.0 m | ~0.18 kg |
| 3500/15 | Power Supply Module | Power Distribution | – | ~1.2 kg |
| 3500/22M | Transient Data Interface | Communication/Monitoring | – | ~0.8 kg |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.