Product Overview
The Bently Nevada 330500-03-05 Velomitor Piezo-velocity Sensor is a solid-state sensor engineered to monitor absolute casing or bearing housing vibrations in rotating machinery. It integrates piezoelectric acceleration sensing and velocity conversion electronics into a single rugged unité, suitable for harsh industrial environments.
Technical Specifications
| Parameter | Value |
|---|---|
| Sensitivity | 3.94 mV/mm/s (100 mV/in/s) ±5% |
| Frequency Response | 4.5 Hz to 5 kHz (±3.0 dB), 6.0 Hz to 2.5 kHz (±0.9 dB) |
| Velocity Range | 1270 mm/s (50 in/s) peak |
| Amplitude Linearity | ±2% to 152 mm/s (6 in/s) peak |
| Transverse Sensitivity | <5% sur sensitivity |
| Noise Floor | 0.004 mm/s (160 μin/s) rms |
| Mounted Resonant Frequency | >12 kHz |
| Output Bias Voltage | -12 ±3.0 VDC |
| Operating Temperature | -55°C to +121°C (-67°F to +250°F) |
| Shock Survivability | 5,000 g peak |
| Humidity | Up to 100% (non-submerged) |
| Diameter | 25.3 mm (0.995 in) |
| Height | 63.2 mm (2.49 in) |
| Poids | 0.142 kg (5.0 oz) |
| Material | 316L stainless steel |
| Connector | 2-pin Mil-C-5015 hermetically-sealed |
| Mounting Torque | 32–46 kg·cm (24–40 in-lb) max |
Applications
-
Monitoring bearing housing and casing vibration
-
Industrial turbines, compressors, pumps, and fans
-
Suitable for marine, surfshore, and hazardous areas
-
Ideal for permanent and semi-permanent installations
Key Advantages
-
Solid-state design with no moving parts eliminates mechanical wear
-
Wide frequency and velocity range for accurate vibration monitoring
-
Hermetically-sealed stainless steel case for harsh environments
-
Compatible with a wide range sur mounting adaptors and cables
-
Certified for hazardous area use (ATEX, IECEx, CSA)
Questions fréquentes (FAQ)
Q1: What type sur signal does the 330500-03-05 output?
A1: It outputs a voltage proportional to vibration velocity (100 mV/in/s).
Q2: Is it suitable for use in hazardous environments?
A2: Yes, it meets ATEX, IECEx, CSA, and DNV certifications.
Q3: Can it be mounted in any orientation?
A3: Yes, vertical, horizontal, or any angled orientation is acceptable.
Q4: What is the sensor’s noise floor?
A4: 0.004 mm/s (160 µin/s) RMS over 4.5 Hz to 5 kHz.
Q5: What cable length can be used without signal degradation?
A5: Up to 305 meters (1,000 feet) using Bently Nevada cable P/N 02173006.
Q6: What is the shock survivability rating?
A6: 5,000 g peak.
Q7: Does the sensor require grounding?
A7: The case is electrically isolated to minimize grounding issues.
Q8: What is the purpose sur the mounting torque specification?
A8: To ensure consistent sensor performance and signal integrity.
Q9: Can this sensor measure displacement?
A9: No, it measures velocity. Integrating for displacement may introduce noise.
Q10: Is this model compatible with older Bently Nevada monitors?
A10: Yes, it can be used with standard Bently Nevada monitoring systems.
Related Modèles (Same Series or Function)
| Modèle Number | Description | Frequency Range | Sensitivity |
|---|---|---|---|
| 330500-00-01 | Standard Velomitor with 1/2-20 UNF mount | 4.5 Hz to 5 kHz | 100 mV/in/s |
| 330500-00-02 | M8 x 1 thread version | 4.5 Hz to 5 kHz | 100 mV/in/s |
| 330525-01-00 | With 1/4-18 NPT mounting | 4.5 Hz to 5 kHz | 100 mV/in/s |
| 330500-03-01 | CSA/US/C certified model | 4.5 Hz to 5 kHz | 100 mV/in/s |
| 330500-03-02 | ATEX approved version | 4.5 Hz to 5 kHz | 100 mV/in/s |
| 330500-03-04 | Multiple certifications (CSA, ATEX) | 4.5 Hz to 5 kHz | 100 mV/in/s |
Popular Bently Nevada Modèles
| Modèle Number | Description | Application Type | Output Signal |
|---|---|---|---|
| 3300 XL 8mm Probe | Proximity Sensor | Shaft vibration/position | Voltage (mV/µm) |
| 3500/42M | Proximitor Seismic Monitor Module | Vibration Monitoring | Digital/Buffered |
| 3500/22M | Transient Data Interface Module | Data Acquisition | Ethernet/Buffered |
| 330104-00-06-10-11 | 3300 XL 8mm Proximity Probe | Rotating Machinery | 7.87 V/mm Sensitivity |
| 330180-91-CN | 3300 XL Proximitor Sensor | Proximity Vibration | Configurable |
| 330500-03-05 | Velomitor Piezo-velocity Sensor | Casing Vibration | 100 mV/in/ |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.