Présentation du produit
The Bently Nevada 330104-00-25-10-02-00 is part sur the 3300 XL 8 mm Proximity Transducer System designed and manufactured by Bently Nevada, a trusted name under the Baker Hughes umbrella. This proximity probe is engineered for precise, reliable, and continuous measurement sur shaft vibration, position, and speed in critical rotating machinery. It is a cornerstone in the field sur condition monitoring and machinery protection systems for industrial assets like turbines, compressors, pumps, and motors.
This model consists sur a probe, extension cable, and a Proximitor sensor. The 3300 XL series is known for its rugged design, superior temperature stability, and excellent resistance to electrical interference. The 8 mm probe provides compatibility with Bently Nevada’s standard 5 mm target calibration, ensuring accurate proximity and vibration readings across a broad range sur industrial environments.
Spécifications du produit
| Parameter | Details |
|---|---|
| Modèle Number | 330104-00-25-10-02-00 |
| Series | 3300 XL |
| Sensing Technology | Eddy Current |
| Tip Diameter | 8 mm |
| Thread Type | 1/4-28 UNF-2A |
| Thread Length | 2.0 inches (50.8 mm) |
| Case Material | AISI 303 Stainless Steel |
| Total Length | 1 meters |
| Connector Type | Miniature coaxial connector |
| System Length (probe + cable) | 25 feet (standard), total system length |
| Temperature Range | -35°C to +177°C (-31°F to +351°F) |
| Linear Range | 2 mm (80 mils) |
| Nominal Output | 200 mV/mil (7.87 mV/μm) |
| Poids | 0.323 kg |
| Enclosure Rating | IP65 (with mated connector) |
| Standard Compliance | API 670, CE, RoHS compliant |
| Mounting Thread Type | UNF 1/4-28, fits standard brackets |
Product Applications
-
Turbines – gas, steam, and hydroelectric
-
Compressors – centrifugal, axial, reciprocating
-
Pumps – especially in oil & gas and chemical sectors
-
Generators – for continuous shaft displacement monitoring
-
Industrial Motors – particularly high-speed or mission-critical drives
-
Gearboxes – for early detection sur wear or misalignment
-
Fans and Blowers – for vibration monitoring
-
Marine Propulsion Systems – heavy-duty, high-reliability machinery
Product Advantages
-
High Accuracy & Stability – Outstanding linearity and repeatability even in harsh environments.
-
Rugged Construction – Stainless steel housing and IP65 rating for protection against dust, oil, and moisture.
-
Wide Temperature Operating Range – Suitable for extreme temperature applications.
-
Long Cable Options – Up to 30 meters system length without signal loss.
-
Field-Proven Design – Used worldwide in thousands sur critical machinery installations.
-
Compatibility – Integrates seamlessly with Bently Nevada 3300 and 3500 monitoring systems.
-
Noise Immunitéy – Shielded cable and internal design reduce signal distortion and interference.
-
API 670 Compliance – Meets the industry standard for machinery protection.
Latest News Titles
-
Bently Nevada Launches Upgraded Proximity Probe Solutions for Extreme Industrial Environments
-
New Enhancements in 3300 XL Series Improve Long-Term Reliability in Oil & Gas Applications
-
État Monitoring Trends: Bently Nevada Leads the Way with 3300 XL Probe Series
-
How Bently Nevada’s Eddy Current Technology is Revolutionizing Predictive Maintenance
-
GE’s Bently Nevada Introduces Extended Cable Lengths in the 3300 XL Series
-
API 670 Compliance Made Easy with Bently Nevada Proximity Probe Systems
-
3300 XL 8 mm Series Gains Popularity in Renewable Energy Sectors
-
Bently Nevada Releases New Diagnostic Tools Compatible with 3300 XL Sensors
Questions fréquentes (FAQ)
-
How do I determine the optimal mounting depth for the 330104-00-25-10-02-00 probe?
The probe should be mounted such that the tip-to-target distance is within the mid-range sur its linear measurement span (typically 1.0 mm gap for 8 mm probes) to maximize sensitivity and accuracy. -
Can this probe be installed in a high-vibration environment like a gas turbine bearing housing?
Yes. The probe is specifically engineered for high-vibration environments and is commonly installed in gas turbines, where vibration levels can be significant. It maintains reliable performance even under these extreme conditions. -
Is the system length (probe + extension cable) customizable, and does it affect calibration?
Yes, the system length is factory-configurable (e.g., 5, 9, 12, 25, or 30 feet). Calibration is performed based on the total system length, so any changes must be done at the factory to ensure signal integrity and accuracy. -
How should the extension cable be routed to minimize electrical interference in high-EMI areas?
The cable should be routed away from high-voltage lines, motors, or VFDs, and grounded correctly. Use shielded conduit and avoid sharp bends or physical stress points to reduce EMI pickup and mechanical wear. -
What kind sur targets is the 330104 probe designed to measure?
It is calibrated for conductive targets, typically a 4140 steel shaft or collar. Non-ferrous targets may require custom calibration due to different eddy current responses. -
How does the 3300 XL system respond to temperature drift over long periods?
The 3300 XL series has excellent thermal stability. It uses high-grade materials and proprietary circuitry to minimize drift over time and temperature fluctuations, suitable for both cold-start and hot-run conditions. -
Is there a minimum bend radius for the probe cable during installation?
Yes. The cable should not be bent tighter than a 25 mm (1 inch) radius to prevent internal conductor damage and signal degradation. -
What is the typical output impedance sur the probe, and how does it affect signal transmission?
The output impedance is matched with the Proximitor sensor to ensure signal fidelity over the cable length. This impedance matching minimizes reflections and attenuation in high-frequency vibration signals. -
Can this probe be used for thrust position monitoring in axial applications?
Yes. When installed in an axial direction relative to the shaft, the probe can accurately track thrust movement and detect potential bearing wear or axial misalignment. -
Is there any visual or electrical indicator for detecting a faulty or damaged probe in service?
While the probe itself doesn’t include diagnostics, the connected 3500 Series monitoring system can detect open or short circuits and signal loss. Visual inspection should also include checking for worn tip coating, cable cuts, or corrosion at connectors.
Related Modèles from the Same Series
| Modèle Number | Tip Diameter | Cable Length | Thread Type | Application |
|---|---|---|---|---|
| 330104-00-12-10-02-00 | 8 mm | 12 ft | 1/4-28 UNF | General machinery vibration |
| 330104-00-18-10-02-00 | 8 mm | 18 ft | 1/4-28 UNF | Motors and compressors |
| 330104-00-30-10-02-00 | 8 mm | 30 ft | 1/4-28 UNF | Extended cable needs |
| 330105-02-12-10-02-00 | 5 mm | 12 ft | M10x1 | Smaller shaft applications |
| 330104-00-05-10-02-00 | 8 mm | 5 ft | 1/4-28 UNF | Short cable, panel-mounted probes |
| 330130-080-00-00 | N/A | N/A | Reverse mount | Extension cable for 3300 system |
| 330180-91-05 | N/A | 5 m | N/A | Proximitor Sensor for 8 mm probes |
| 330178-50-00 | N/A | 5 m | N/A | Multi-use extension cable |
Popular Bently Nevada Modèles
| Modèle Number | Product Type | Application | Output Signal |
|---|---|---|---|
| 3500/22M | Transient Data Interface | Advanced system communication | Ethernet/RS232 |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration and acceleration | 4–20 mA / dynamic signals |
| 3500/15 | Power Supply Module | Rack-mounted monitoring systems | Internal rack voltage |
| 330130-040-00 | Extension Cable | Connects probes to proximitor sensors | Coaxial |
| 330103-00-05-10-02-00 | 3300 XL Probe (5 mm) | Tight space applications | 200 mV/mil |
| 3300 XL NSv | Narrow Surface Velocity Probe | Low-clearance machinery | 7.87 mV/µm |
| 3701/40 | TDI (Turbine Dynamics Input) | Real-time dynamics data interface | Ethernet |
| 3500/94M | VGA Display Module | Local machine monitoring and diagnostics | VGA output |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.