Présentation du produit
The Bently Nevada 330103-00-08-05-02-00 is a robust and highly reliable proximity probe designed as part sur the 3300 XL series. This probe, featuring an 8mm diameter sensing tip, is engineered to deliver precise measurements sur shaft position and vibration in critical rotating machinery. It operates on the principle sur eddy-current sensing and provides non-contact, continuous monitoring, which is essential for early detection sur mechanical issues.
Widely regarded as a trusted component in industrial condition monitoring, the 330103 model is built to withstand harsh operating environments commonly found in power generation, oil and gas, and heavy industrial plants. Its compatibility with the 3300 XL monitoring system enables seamless integration for vibration and position measurement with minimal signal interference and high reliability.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Référence | 330103-00-08-05-02-00 |
| Product Name | Bently Nevada 3300 XL 8mm Proximity Probe |
| Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF |
| Connector Type | Miniature coaxial connector |
| Linear Range | 0.5 mm (50 mils) |
| Output Signal | Voltage proportional to distance, approx. 200 mV/mil |
| Frequency Response | DC to 10 kHz |
| Operating Temperature Range | -35°C to +177°C (-31°F to +350°F) |
| Poids | 0.161 kg |
| Total Length | 0.5 meter |
| Mounting | Threaded insertion, 3/8-24 UNF |
| Compliance | API 670 compliant, RoHS |
Applications
The 330103-00-08-05-02-00 proximity probe is used extensively for:
-
Vibration Monitoring on Turbomachinery such as steam turbines, gas turbines, and compressors.
-
Shaft Position and Thrust Measurement for axial displacement analysis.
-
Rotating Equipment Protection in power plants and petrochemical facilities.
-
Hydroelectric Generator Monitoring for early detection sur rotor movement or imbalance.
-
Pumps and Fans where shaft movement and vibration must be continuously tracked.
-
Oil and Gas Industry for condition monitoring sur critical rotating assets.
-
Industrial Machinery requiring accurate, real-time shaft position sensing.
-
API 670-compliant État Monitoring Systems.
-
High-temperature and harsh environments where reliability is paramount.
-
Integration with Bently Nevada 3300 XL Systems for comprehensive vibration analysis and asset protection.
Product Advantages
-
Precision and Reliability: Delivers consistent and accurate distance measurement under varied operating conditions.
-
Durable Design: Engineered to resist high temperatures, mechanical shock, and electromagnetic interference.
-
Long Service Life: Low drift and stable output minimize downtime and reduce maintenance.
-
Wide Operating Range: Suitable for machines operating from ambient to elevated temperatures up to +177°C.
-
Ease sur Installation: Standard 3/8-24 UNF threaded mounting fits common machine designs.
-
Compatibility: Works seamlessly with the Bently Nevada 3300 XL monitoring system and accessories.
-
Industry Compliance: Meets API 670 and other relevant industry standards.
-
Robust Cabling: Shielded cable protects the signal and supports installation flexibility.
-
Signal Quality: High signal-to-noise ratio ensures reliable vibration and position data.
-
Trusted Marque: Supported by GE’s Bently Nevada expertise and global service network.
Questions fréquentes (FAQ)
-
What does the part number 330103-00-08-05-02-00 signify?
It identifies a 3300 XL 8mm proximity probe with a 0.5 meter length, 3/8-24 UNF thread, and a miniature coaxial connector. -
Is this probe suitable for high-temperature applications?
Yes, it operates reliably up to +177°C, suitable for many industrial environments. -
What is the typical linear range sur this probe?
The linear range is approximately 0.5 mm (50 mils), providing accurate displacement measurement within this range. -
Can it be used with older Bently Nevada systems?
It is designed for the 3300 XL system, but compatibility with older systems depends on connector and cable configurations. -
What type sur maintenance does this probe require?
Minimal maintenance is needed; routine inspection and system calibration as per plant schedule suffice. -
How does the probe measure vibration?
By sensing changes in the distance to the rotating shaft, it converts displacement to voltage signals reflecting vibration amplitude. -
Is the probe cable replaceable?
Cable replacement depends on model specifics; typically, the entire probe assembly is replaced for integrity. -
Can it be installed in hazardous environments?
Installation in hazardous locations requires appropriate certification and installation in certified enclosures. -
What is the output signal type?
The output is an analog voltage proportional to the target shaft’s distance. -
How does this probe differ from 5mm tip models?
The 8mm tip provides increased robustness and signal stability, surten preferred in heavy-duty applications.
Related Modèles in the Same Series
| Modèle Number | Description | Cable Length | Tip Diameter | Application |
|---|---|---|---|---|
| 330103-00-10-05-02-00 | 3300 XL 8mm Proximity Probe, 10 ft cable | 10 ft (3 m) | 8 mm | Extended reach monitoring |
| 330101-00-20-05-02-00 | 3300 XL 8mm Probe, 20 ft cable | 20 ft (6.1 m) | 8 mm | Long cable for remote mounting |
| 330104-00-08-05-02-00 | 3300 XL 5mm Proximity Probe, 8 ft cable | 8 ft (2.44 m) | 5 mm | Compact equipment sensing |
| 330130-040-00 | 3300 XL Extension Cable | 4 m | N/A | Cable extension |
| 330105-00-08-05-02-00 | 3300 XL 8mm Probe, standard cable | 8 ft (2.44 m) | 8 mm | General purpose monitoring |
| 330180-91-00 | 3300 XL Proximitor Sensor | N/A | N/A | Signal conditioning unité |
Popular Modèles from the Same Marque (Bently Nevada)
| Modèle Number | Product Type | Application Area | Notes |
|---|---|---|---|
| 3500/22M | Transient Data Interface | 3500 Series Monitoring | Ethernet-enabled communication module |
| 3500/42M | Vibration Monitor Module | Turbomachinery | 4-channel vibration monitoring |
| 3500/15 | Power Supply Module | 3500 System | Redundant power supply |
| 3701/40 | Machinery Protection System | Critical rotating assets | Modular, distributed architecture |
| 330104-00-20-10-02-00 | 5mm Proximity Probe | Compact machinery monitoring | Small tip for tight clearances |
| 3500/25 | Keyphasor Module | Shaft speed and phase detection | Supports multiple inputs |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.