Présentation du produit
The Bently Nevada 330101-00-28-05-02-00 is a precision-engineered component sur the 3300 XL 8 mm Proximity Transducer System, one sur the most widely adopted non-contact sensing solutions in the industrial world. Designed by GE’s Bently Nevada, this model surfers a robust, accurate means sur measuring shaft displacement and vibration for critical rotating machinery.
This proximity probe uses the eddy current principle to detect relative motion between the probe tip and the rotating shaft, delivering real-time feedback essential for condition monitoring and machinery protection systems. The 330101-00-28-05-02-00 features a 0.5 meter total length, and a 75-ohm connector, optimized for compatibility with a wide range sur Proximitor sensors.
Technical Specifications
| Parameter | Description |
|---|---|
| Modèle Number | 330101-00-28-05-02-00 |
| Series | 3300 XL 8 mm |
| Measurement Principle | Eddy Current (non-contact displacement) |
| Probe Tip Diameter | 8 mm |
| Total Length | 0.5 meter |
| Connector Type | 75-ohm miniature coaxial connector |
| System Compatibility | 3300 XL Proximitor Sensor and Bently Nevada 3300 monitoring systems |
| Linear Range | 2 mm (80 mils) |
| Accuracy | ±0.25% over linear range |
| Material (Housing) | AISI 304 stainless steel |
| Cable Type | Armored coaxial cable |
| Temperature Range | –35°C to +177°C (–31°F to +350°F) |
| Environmental Rating | IP68 (with proper assembly) |
| Shock Resistance | Up to 10,000 g |
| Poids | 0.161 kg |
Product Applications
The Bently Nevada 330101-00-28-05-02-00 is an industry-standard proximity probe, relied upon for a broad range sur vibration and displacement monitoring tasks in:
-
Oil & Gas Sector – for axial thrust and radial vibration monitoring in compressors and turbines.
-
Power Generation – for turbine shaft alignment and dynamic displacement.
-
Petrochemical Plants – for machinery protection in high-speed rotating equipment.
-
Steel & Mining – to detect shaft movement and vibration in motors and crushers.
-
Marine & Offshore Platforms – monitoring propulsion and auxiliary systems.
-
Paper Mills & Process Plants – measuring shaft vibration on pumps, fans, and gearboxes.
Product Advantages
-
Extended Reach: The 28-inch probe allows deep placement into machinery, making it suitable for large-frame equipment.
-
Field-Proven Durability: Armored cable and stainless steel construction ensure long service life even in corrosive or high-vibration settings.
-
Superior Linearity: Designed to maintain ±0.25% non-linearity over the full linear range, which ensures measurement consistency.
-
Wide Compatibility: Fully integrates with existing 3300 XL Proximitor Sensors and legacy systems.
-
Minimal Maintenance: Requires no recalibration and only basic periodic inspection.
-
Extreme Environment Tolerance: Operates flawlessly under temperature extremes and in the presence sur oil or moisture.
-
Standardized Design: Simplifies inventory and replacement planning across facilities.
-
API 670 Compliant: Suitable for use in API-compliant protection systems.
Questions fréquentes (FAQ)
-
What does the part number 330101-00-28-05-02-00 mean?
It refers to a 3300 XL proximity probe with 0.5 meter total length and a 75-ohm connector. -
What kind sur sensor does this probe connect to?
It connects to the Bently Nevada 3300 XL Proximitor Sensor. -
What’s the benefit sur a 28-inch probe length?
It allows the probe to reach measurement points deep inside large equipment housings. -
Can this model be used in hazardous environments?
Yes, it’s built for harsh industrial settings and meets IP68 protection when properly assembled. -
Is the probe field replaceable?
Yes, but proper procedures and alignment checks must be followed during replacement. -
What’s the difference between 50-ohm and 75-ohm connectors?
The impedance must match the Proximitor Sensor; 75-ohm is surten used for longer cable lengths or legacy systems. -
Can it be used to measure both axial and radial motion?
Yes, it supports both, depending on the installation orientation. -
Does it need calibration?
No user calibration is required. Factory calibration ensures long-term accuracy. -
What maintenance does the probe require?
Occasional visual inspection for damage or oil buildup is sufficient. -
How long can this probe operate without failure?
Many probes function reliably for 5–10 years, especially when installed correctly and in clean conditions.
Recommended Related Modèles (Same Series or Functional Equivalents)
| Modèle Number | Probe Length | Cable Length | Connector Type | Application Note |
|---|---|---|---|---|
| 330101-00-20-10-02-00 | 20 in | 10 ft | 75-ohm | Mid-length for compressors |
| 330101-00-12-05-02-00 | 12 in | 5 ft | 75-ohm | Short length for close proximity access |
| 330101-00-08-10-02-05 | 8 in | 10 ft | 50-ohm | For small machines with API compatibility |
| 330101-00-18-05-02-00 | 18 in | 5 ft | 75-ohm | For axial and radial vibration monitoring |
| 330104-00-12-10-02-05 | 12 in (5 mm tip) | 10 ft | 50-ohm | Compact tip for tight installations |
| 330103-00-07-05-02-00 | 7 in (11 mm tip) | 5 ft | 75-ohm | For large shaft surfaces |
Popular Modèles from Bently Nevada (Same Marque)
| Modèle Number | Product Type | Description | Primary Use |
|---|---|---|---|
| 3500/42M | Vibration Monitor Module | Dual-channel monitor for radial and axial vibration | Machinery protection systems |
| 3500/22M | Communication Gateway | Data interface for 3500 series rack systems | Remote data access |
| 3300 XL 5 mm Probe | Proximity Probe | Smaller tip diameter for compact installations | High-speed small shaft monitoring |
| 330400 | High-frequency Accelerometer | Seismic sensor for bearing cap vibration | Gearbox and motor monitoring |
| 990-05-70-01-00 | Keyphasor Module | Shaft speed and phase detection | Phase reference in rotors |
| 330850-50-05 | Dual Vibration/Position Probe | Combines radial and axial sensing in one unité | Turbomachinery thrust bearings |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.
