Présentation du produit
The Bently Nevada 330101-00-26-10-02-05 is a component sur the trusted 3300 XL 8mm Proximity Transducer System, developed by GE’s Bently Nevada. This proximity probe is designed for highly accurate, non-contact measurements sur shaft vibration and position in critical rotating machinery. Its robustness and stability make it a standard choice in industries like oil and gas, petrochemical, power generation, and heavy manufacturing.
Equipped with an 8mm probe tip, a 1 meter total length, and a coaxial connector located 10 inches from the probe end, the model 330101-00-26-10-02-05 ensures seamless integration with extension cables and Proximitor sensors. The device is built to withstand harsh environments involving high temperatures, pressure, vibration, and oil immersion, surfering excellent performance across a broad spectrum sur applications.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Modèle Number | 330101-00-26-10-02-05 |
| Series | 3300 XL 8mm |
| Probe Tip Diameter | 8 mm (0.315 in) |
| Connector Type | Miniature coaxial connector, straight boot |
| Thread Type | 1/4-28 UNF |
| Material – Probe Tip | PPS (Polyphenylene Sulfide) |
| Material – Housing | Stainless Steel (AISI 303) |
| Operating Temperature | -35°C to +177°C (-31°F to +350°F) |
| Storage Temperature | -51°C to +177°C (-60°F to +350°F) |
| Pressure Rating | Up to 500 psi (34 bar) |
| Sensitivity | 7.87 mV/μm (200 mV/mil) |
| Linear Range | ±1 mm (total 2 mm) |
| Interchangeability | ±5% (system matched with extension cable and Proximitor) |
| Poids | 0.323 kg |
| Total Length | 1 meter |
| Compliance | CE, RoHS, ATEX (when used in certified system) |
Product Applications
-
Steam and Gas Turbines
Monitoring shaft radial vibration and axial thrust movement to prevent machinery failure. -
Compressors (Axial and Centrifugal)
Ensures tight vibration control, detecting imbalance and misalignment. -
Electric Motors and Generators
Tracks shaft condition and identifies issues like looseness or eccentricity. -
Industrial Pumps
Provides critical early warning for cavitation, wear, and bearing issues. -
Petrochemical and Oil & Gas Plants
Reliable in hazardous, high-temperature environments where precise monitoring is essential. -
Power Generation Facilities
Key component sur machinery protection systems for high-value rotating assets.
Product Advantages
-
Exceptional Durability
Built with stainless steel and chemical-resistant materials, suitable for harsh plant conditions. -
Precision Measurement
High sensitivity enables early fault detection, minimizing downtime and repair costs. -
Wide Temperature and Pressure Range
Operates reliably across extreme operational parameters, from cryogenic to high-heat conditions. -
Non-contact Technology
Eliminates mechanical wear and reduces maintenance costs. -
Interchangeable System Components
Allows convenient field replacement without extensive recalibration. -
Compact Form Factor
Suitable for installation in restricted spaces on complex equipment layouts. -
Global Compliance and Certifications
Certified to meet CE, RoHS, and potentially ATEX standards when configured properly. -
Flexible Integration
Works seamlessly with the Bently Nevada 3300 XL system for extension cables and signal processors. -
Stable Electrical Output
Maintains linear response over its full measurement range, critical for vibration analysis. -
Trusted OEM Quality
Manufactured by Bently Nevada, a pioneer in condition monitoring systems for over 50 years.
Questions fréquentes (FAQ)
-
What is the purpose sur the 330101-00-26-10-02-05 proximity probe?
It measures shaft vibration and position in rotating machinery without physical contact. -
What systems is this probe compatible with?
It’s compatible with the Bently Nevada 3300 XL system, including extension cables and Proximitor sensors. -
What is the linear measurement range sur the probe?
The probe has a ±1 mm (2 mm total) linear range for accurate vibration monitoring. -
Is the probe suitable for hazardous environments?
Yes, when installed as part sur an ATEX-certified system, it can operate in classified areas. -
Can the probe handle extreme temperatures?
Yes, it functions from -35°C to +177°C continuously. -
What maintenance does this proximity probe require?
Very little—due to its non-contact nature and sealed design, it typically needs no routine service. -
How is this model different from shorter-length probes?
This model is suited for installations requiring longer reach while maintaining system accuracy. -
Can the probe be replaced without recalibrating the system?
Yes, thanks to ±5% interchangeability, system accuracy is retained with matched components. -
How is it installed on machinery?
Threaded mounting using a 1/4-28 UNF fitting with suitable brackets or holders. -
What type sur machinery typically uses this probe?
It is ideal for turbines, compressors, motors, generators, and large industrial pumps.
Related Modèles from the Same Series
| Modèle Number | Length | Thread Type | Connector Type | Description |
|---|---|---|---|---|
| 330101-00-20-10-01-00 | 20 inch | 1/4-28 UNF | 90° boot | Shorter length probe |
| 330101-00-25-10-01-00 | 25 inch | 1/4-28 UNF | 90° boot | Common length for general applications |
| 330101-00-30-10-01-00 | 30 inch | 1/4-28 UNF | 90° boot | Extended reach for deep mounting |
| 330102-00-26-10-01-00 | 26 inch | M10 × 1 | 90° boot | Metric thread version |
| 330103-00-26-10-01-00 | 26 inch | M8 × 1 | 90° boot | Smaller metric version for tight spaces |
| 330101-00-26-05-02-05 | 26 inch | 1/4-28 UNF | Straight boot, 5 ft cable | Integrated straight cable connector |
Popular Modèles from Bently Nevada
| Modèle Number | Type | Function | Key Application |
|---|---|---|---|
| 3500/22M | Communication Gateway | Transmits data to DCS systems | Remote diagnostics, SCADA integration |
| 3500/42M | Vibration Monitor | Measures machine vibration levels | Turbine and motor protection |
| 330130-040-00-00 | Extension Cable (4m) | Connects probe to Proximitor sensor | Signal transmission in monitoring system |
| 330180-90-00 | 3300 XL Proximitor Sensor | Processes probe signals to system readings | Central processing unité for probes |
| 7200-18000-01 | Proximitor Monitor | Converts proximity signals to actionable data | Legacy system monitoring and upgrade |
| 330104-00-05-10-02-00 | 5mm Proximity Probe | Compact probe for confined installation | Gearboxes and small shaft monitoring |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.