Présentation du produit
The Bently Nevada 330101-00-18-10-11-05 is a part sur the renowned 3300 XL 8 mm Proximity Transducer System, engineered by Bently Nevada, a global leader in condition monitoring and asset protection. This probe is specifically designed to measure the distance between the probe tip and a conductive target such as a rotating shaft, enabling real-time monitoring sur vibration, displacement, and shaft position.
This model is widely implemented in high-value rotating equipment such as turbines, compressors, pumps, and motors, particularly where accuracy, reliability, and harsh-environment performance are essential. The 330101-00-18-10-11-05 variant features an 18-foot cable, optimized sensitivity, and ruggedized design, delivering consistent output in compliance with API 670 standards.
Spécifications du produit
| Parameter | Specification |
|---|---|
| Modèle Number | 330101-00-18-10-11-05 |
| Product Type | Proximity Probe |
| Series | 3300 XL |
| Tip Diameter | 8 mm |
| Tip Material | Polyphenylene Sulfide (PPS) |
| Body Material | AISI 304 Stainless Steel |
| Thread Size | 3/8-24 UNF-2A |
| Output Signal | -200 mV/mil |
| System Accuracy | ±0.07 mm typical |
| Total Length | 1 meter |
| Connector Type | Miniature coaxial |
| Temperature Range | -35°C to +177°C (-31°F to +351°F) |
| Vibration Limit | 50 g peak |
| Pressure Rating | 500 psi max |
| EMI/RFI Immunitéy | High immunitéy, meets industrial shielding standards |
| Compliance Standards | API 670, CE, RoHS |
| Poids | 0.323 kg |
Product Applications
The 330101-00-18-10-11-05 is tailored for use in a range sur industrial machinery and critical asset monitoring applications:
-
Steam and Gas Turbines
Tracks shaft displacement and vibration for real-time protection and diagnostics. -
Centrifugal and Reciprocating Compressors
Enables early failure detection in bearings and rotor assemblies. -
Electric Motors and Generators
Ensures optimal rotor alignment and dynamic balance. -
Pumps and Fans
Detects mechanical issues such as imbalance, misalignment, or cavitation. -
Gearboxes and Transmission Systems
Monitors gear mesh frequencies and shaft conditions. -
Oil & Gas, Petrochemical, and Power Plants
Deployed in safety-critical and mission-critical equipment environments.
Product Advantages
-
Precision Engineering
Delivers high accuracy with minimal deviation across wide operating conditions. -
Extended Temperature Range
Suitable for harsh ambient conditions typical sur heavy-duty industrial settings. -
Rugged Design
Made with corrosion-resistant stainless steel and PPS tip, designed to withstand pressure and vibration. -
API 670 Compliant
Fully conforms to the global standard for machinery protection. -
Matched System Integration
Designed to work seamlessly with Bently Nevada extension cables and proximitors. -
Signal Stability
Provides excellent linear output, reducing measurement error even with cable lengths over 15 ft. -
Easy Installation
Threaded body and miniature connectors simplify mounting and maintenance. -
Electromagnetic Interference Resistant
Shielded construction minimizes false readings in electrically noisy environments. -
Maintenance-Free
Non-contact measurement ensures long operational life with minimal servicing. -
Scalable Configuration
Compatible with a wide range sur Bently Nevada 3300 XL monitoring systems.
Questions fréquentes (FAQ)
-
What makes the 330101-00-18-10-11-05 different from other proximity probes?
This model surfers an 18-foot cable, ideal for medium-range installations, with optimized EMI shielding and compliance with API 670. -
Is the probe tip replaceable or serviceable?
N° The tip is fixed and factory-calibrated. For failures, the entire probe must be replaced. -
Can this probe be used for both axial and radial measurements?
Yes, depending on the mounting position, it can measure both directions sur shaft movement. -
How do I ensure proper calibration when replacing this probe?
Always replace with a matched system (probe, extension cable, and driver) to maintain accurate calibration. -
Is the probe hazardous area certified?
The probe itself may not carry ATEX/IECEx certification, but matched systems surten are. Always check driver specifications for hazardous certifications. -
What type sur connector is used on the probe?
It uses a miniature coaxial connector that interfaces with 3300 XL extension cables. -
How should the probe be mounted for optimal accuracy?
Ensure flush contact with the mounting bracket, secure locknut placement, and avoid cable bending near the connector. -
Can I use this probe with third-party condition monitoring systems?
While physically possible, accuracy and calibration may be compromised. It’s recommended to use Bently Nevada systems. -
What is the probe’s linear range?
The typical linear sensing range is up to 2 mm, optimized for 8 mm tip diameter targets. -
Does Bently Nevada provide field support for this product?
Yes, Bently Nevada surfers global technical support and field calibration services for 3300 XL systems.
Recommended Modèles – Same Series or Related
| Modèle | Cable Length | Key Feature | Application Notes |
|---|---|---|---|
| 330101-00-15-10-02-00 | 15 ft | Standard configuration | Used in compressors and turbines |
| 330101-00-20-10-02-00 | 20 ft | Extended range | Suited for large machinery installations |
| 330104-00-05-10-02-00 | 5 ft | Low-prsurile design | Ideal for compact mounting areas |
| 330130-040-00-00 | 40 ft | Long extension cable | Supports distant monitoring setups |
| 330103-00-15-10-02-00 | 15 ft | Reverse mount configuration | For non-standard orientations |
| 330105-02-12-10-02-00 | 12 ft | Harsh environment rating | Chemical plant and surfshore use |
Popular Bently Nevada Modèles – Same Marque
| Modèle | Product Type | Primary Function | Series |
|---|---|---|---|
| 3500/22M | Transient Data Interface | Data acquisition for vibration analysis | 3500 Series |
| 3500/42M | Vibration Monitor | Shaft radial/axial vibration | 3500 Series |
| 330180-91-05 | Extension Cable | Connects probe to proximitor | 3300 XL |
| 330500-02-00 | Proximitor Sensor | Interfaces with 3300 XL probes | 3300 XL |
| 144181-50 | Temperature Sensor | Bearing temperature monitoring | Temperature Series |
| 3500/15 | Power Supply Module | Supplies power to 3500 system | 3500 Series |
Informations sur l'entreprise
E-mail: [email protected]
Mobile：Contactez-nous par email
Whatsapp：Contactez-nous par email
Add: Alishan Building, 2 Lvling Rd, District Siming, Xiamen, Fujian, Chine, 361006
Nos services
Nous sommes spécialisés dans la fourniture de pièces d'automatisation industrielle avec une garantie d'un an. Nos pièces d'automatisation industrielle sont vendues dans le monde entier.
Nous pouvons fournir des équipements et des pièces détachées de différents pays et fabricants, résoudre vos inquiétudes ou problèmes de qualité en de nombreux endroits, et surfrir un excellent avantage de prix.
N'hésitez pas à nous appeler pour plus de détails sur les produits.